This one also needed a bit of shuffling around, but MTYPE_RE is the only
one left used across file boundaries now.
Signed-off-by: David Lamparter <equinox@diac24.net>
Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
like it has been done for iptable contexts, a zebra dplane context is
created for each ipset/ipset entry event. The zebra_dplane_ctx job is
then enqueued and processed by separate thread. Like it has been done
for zebra_pbr_iptable context, the ipset and ipset entry contexts are
encapsulated into an union of structures in zebra_dplane_ctx.
There is a specificity in that when storing ipset_entry structure, there
was a backpointer pointer to the ipset structure that is necessary
to get some complementary information before calling the hook. The
proposal is to use an ipset_entry_info structure next to the ipset_entry,
in the zebra_dplane context. That information is used for ipset_entry
processing. The ipset name and the ipset type are the only fields
necessary.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The iptable processing was not handled in remote dataplane, and was
directly processed by the thread in charge of zapi calls. Now that call
can be handled in the zebra_dplane separate thread. once a
zebra_dplane_ctx is allocated for iptable handling, the hook call is
performed later. Subsequently, a return code may be triggered to zclient
interface if any problem occurs when calling the hook call.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Neither tabs nor newlines are acceptable in syslog messages. They also
break line-based parsing of file logs.
Signed-off-by: David Lamparter <equinox@diac24.net>
Use the new nested NDA_FDB_EXT_ATTRS attribute to control per-fdb
notifications.
PS: The attributes where updated as a part of the kernel upstreaming
hence the change.
Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This includes -
1. non-DF block filter
2. List of es-peers that need to be blocked per-access port (for
split horizon filtering)
3. Backup nexthop group to failover local-es via the VxLAN overlay
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Fixes the valgrind error we were seeing on startup due to
initializing the msg header struct:
```
==2534283== Thread 3 zebra_dplane:
==2534283== Syscall param recvmsg(msg) points to uninitialised byte(s)
==2534283== at 0x4D616DD: recvmsg (in /usr/lib64/libpthread-2.31.so)
==2534283== by 0x43107C: netlink_recv_msg (kernel_netlink.c:744)
==2534283== by 0x4330E4: nl_batch_read_resp (kernel_netlink.c:1070)
==2534283== by 0x431D12: nl_batch_send (kernel_netlink.c:1201)
==2534283== by 0x431E8B: kernel_update_multi (kernel_netlink.c:1369)
==2534283== by 0x46019B: kernel_dplane_process_func (zebra_dplane.c:3979)
==2534283== by 0x45EB7F: dplane_thread_loop (zebra_dplane.c:4368)
==2534283== by 0x493F5CC: thread_call (thread.c:1585)
==2534283== by 0x48D3450: fpt_run (frr_pthread.c:303)
==2534283== by 0x48D3D41: frr_pthread_inner (frr_pthread.c:156)
==2534283== by 0x4D56431: start_thread (in /usr/lib64/libpthread-2.31.so)
==2534283== by 0x4E709D2: clone (in /usr/lib64/libc-2.31.so)
==2534283== Address 0x85cd850 is on thread 3's stack
==2534283== in frame #2, created by nl_batch_read_resp (kernel_netlink.c:1051)
==2534283==
==2534283== Syscall param recvmsg(msg.msg_control) points to unaddressable byte(s)
==2534283== at 0x4D616DD: recvmsg (in /usr/lib64/libpthread-2.31.so)
==2534283== by 0x43107C: netlink_recv_msg (kernel_netlink.c:744)
==2534283== by 0x4330E4: nl_batch_read_resp (kernel_netlink.c:1070)
==2534283== by 0x431D12: nl_batch_send (kernel_netlink.c:1201)
==2534283== by 0x431E8B: kernel_update_multi (kernel_netlink.c:1369)
==2534283== by 0x46019B: kernel_dplane_process_func (zebra_dplane.c:3979)
==2534283== by 0x45EB7F: dplane_thread_loop (zebra_dplane.c:4368)
==2534283== by 0x493F5CC: thread_call (thread.c:1585)
==2534283== by 0x48D3450: fpt_run (frr_pthread.c:303)
==2534283== by 0x48D3D41: frr_pthread_inner (frr_pthread.c:156)
==2534283== by 0x4D56431: start_thread (in /usr/lib64/libpthread-2.31.so)
==2534283== by 0x4E709D2: clone (in /usr/lib64/libc-2.31.so)
==2534283== Address 0xa0 is not stack'd, malloc'd or (recently) free'd
==2534283==
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When attempting to limit the amount of data sent from the kernel
to FRR, some kernels we can run against may not have this ability
in which case the setsockopt will fail. Notice that in the log.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add new compile option to enable human readable netlink dumps with
`debug zebra kernel msgdump`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
It was wrongly assumed that the kernel is replying in batches when multiple
requests fail. The kernel sends one error message at a time, so we can
simply keep reading data from the socket as long as possible.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
The fuzzing code that is in the master branch is outdated and unused, so it
is worth to remove it to improve readablity of the code.
All the code related to the fuzzing is in the `fuzz` branch.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
We can make the Linux kernel send an ARP/NDP request by adding
a neighbour with the 'NUD_INCOMPLETE' state and the 'NTF_USE' flag.
This commit adds new dataplane operation as well as new zapi message
to allow other daemons send ARP/NDP requests.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
* Rename netlink utility functions like addattr to be less ambiguous
* Replace rta_attr_* functions with nl_attr_* since they introduced
inconsistencies in the code
* Add helper functions for adding rtnexthop struct to the Netlink
message
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
The netlink_request function takes a `struct nlmsghdr *`
pointer from a common pattern that we use:
struct {
struct nlmsghdr n;
struct fib_rule_hdr frh;
char buf[NL_PKT_BUF_SIZE];
} req;
We were calling it `netlink_request(Socket, &req.n)`
The problem here is that coverity, rightly so, sees that
we access the data after the nlmsghdr in netlink_request and
tells us we have an read beyond end of the structure. While
we know we haven't mangled anything up here because of manual
inspection coverity doesn't have this knowledge implicitly.
So let's modify the code call to netlink_request to pass in the
void pointer of the req structure itself, cast to the appropriate
data structure in the function and do the right thing. Hopefully
the coverity SA will be happy and we can move on with our life.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The existing usage of the rta_nest and addattr_nest
functions were not adding the NLA_F_NESTED flag
to the type. As such the new nexthop functionality was
actually looking for this flag, while apparently older
code did not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The linux kernel will occassionally send RTM_GETNEIGH when
it expects user space to help in resolution of an ARP entry.
See linux kernel commit:
commit 3e25c65ed085b361cc91a8f02e028f1158c9f255
Author: Tim Gardner <tim.gardner@canonical.com>
Date: Thu Aug 29 06:38:47 2013 -0600
net: neighbour: Remove CONFIG_ARPD
Since we don't care about this, let's just safely ignore this
message for the moment. I imagine in the future we might
care when we implement neighbor managment in the system.
Reported By: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On startup when we are requesting all nexthop objects
from the kernel and it doesn't support that, we should not
produce an error message.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add the functionality to parse new nexthop group messages
from the kernel and insert them into the appropriate hash
tables. Parsing is done at startup between interface and
interface address lookup. Add functionality to parse
changes to nexthops we already have. Add functionality
to parse delete nexthop messages from the kernel and
remove them from our table.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add some base functionality so we can verify we are getting messages
about nexthops from the kernel.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a bit of extra code to indicate to the operator why
we intentionally rejected a kernel route from being used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In a variety of places we are using DAEMON_VTY_DIR, convert
to use frr_vtydir. This will allow us in a future commit
to have the -N namespace option be automatically used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fix the macros for reading NLA attribute info
from an extended error ack. We were processing the data
using route attributes (rtattr) which is identical in size
to nlattr but probably should not be used.
Further, we were incorrectly calculating the length of the
inner netlink message that cause the error. We have to read
passed that in order to access all the nlattr's.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The master thread handler is really part of the zrouter structure.
So let's move it over to that. Eventually zserv.h will only be
used for zapi messages.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Make netlink_request api generic where it can be used
for dump or querying specific information request.
nelink request nlm flags (NLM_F_ROOT | NLM_F_MATCH) are
used to dump purpose, if client wants to query spcific
MAC or IP using netlink_request does not require to set
them.
nlm struct is passed by the caller of netlink_request,
it can also set the nlm request flags.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
