The `enum zclient_send_status` enum needs to be extended
throughout the code base to use the new states and
to fix up places where we tested against the return
value being non zero.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a `enum zclient_send_status` for appropriate handling
of return codes from zclient_send_message. Touch all the places
where we handle this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When FRR sends data over the ZAPI protocol from the upper levels to zebra, indicate
to the calling functions that we have started buffering data to be sent if the
socket is full underneath it.
Also add a call back function `zebra_buffer_write_ready` that we can call
when an upper level protocol's socket buffer has been drained.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The linux kernel is getting RTM_F_OFFLOAD_FAILED for kernel routes
that have failed to offload. Write the code
to receive these notifications from the linux kernel
and store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Move the FOREACH_AFI_SAFI macro from bgpd.h to zebra.h( GLOBAL's YOUALL )
Then convert all the places that have the two level for loop to
iterate over all afi/safis
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The route_map_object_t was being used to track what protocol we were
being called against. But each protocol was only ever calling itself.
So we had a variable that was only ever being passed in from route_map_apply
that had to be carried against and everyone was testing if that variable
was for their own stack.
Clean up this route_map_object_t from the entire system. We should
speed some stuff up. Yes I know not a bunch but this will add up.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
As part of normal processing we allow bgp commands to walk
up the command node chain. We are experiencing this crash:
Thread 1 "bgpd" received signal SIGABRT, Aborted.
__GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
(gdb) bt
assertion=0x7ffff7f3ba4f "set", file=0x7ffff7f3ba44 "lib/yang.c", line=413, function=<optimized out>)
at assert.c:92
line=413, function=0x7ffff7f3bc50 <__PRETTY_FUNCTION__.9> "yang_dnode_get") at assert.c:101
vty=0x5555561715a0, argc=3, argv=0x555558601620) at bgpd/bgp_vty.c:9568
cmd=0x0) at lib/command.c:937
at lib/command.c:997
matched=0x0, vtysh=0) at lib/command.c:1161
at lib/vty.c:517
(gdb)
9582 bgp_glb_dnode = yang_dnode_get(vty->candidate_config->dnode,
(gdb) p vty->xpath
$8 = {
"/frr-routing:routing/control-plane-protocols/control-plane-protocol[type='frr-bgp:bgp'][name='bgp'][vrf='default']/frr-bgp:bgp", '\000' <repeats 897 times>, '\000' <repeats 1023 times>, '\000' <repeats 1023 times>,
'\000' <repeats 1023 times>, '\000' <repeats 1023 times>, '\000' <repeats 1023 times>, '\000' <repeats 1023 times>,
'\000' <repeats 1023 times>}
(gdb) p vty->xpath_index
$9 = 0
(gdb)
We are effectively sending in an array index based upon vty->xpath_index( which is zero) but
the VTY_CURR_XPATH macro subtracts 1 from that value to find the appropriate xpath to use.
This of course subtracts 1 from 0 and we underflow the array.
The relevant section in a config file is this:
address-family ipv6 flowspec
bgp maxim...
Effectively we were trying to walk up the command chain for flowspec to see
if the command is entered correctly. There is a function vty_check_node_for_xpath_decrement
that was looking at bgp sub-modes to make the decision to allow us to decrement
the vty->xpath_index which did not have the v4 or v6 flowspec bgp sub modes in the
check.
Adding them in fixes the problem.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
calling "skiplist test" and then "skiplist debug",
there was a crash due to a freed pointer.
Agreed to remove static pointer (see PR #7474).
Signed-off-by: Emanuele Bovisio <emanuele.bovisio@eolo.it>
When a BFD integrated session already exists setting the profile
doesn't cause a session update (or vice versa): fix this issue by
handling the other cases.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Let the integration protocol always send the full configuration
instead of saving a few bytes. It will also allow protocols to specify
source address for IPv4 single hop connections and interface for multi
hop configuration.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Issue:
The bgp routes learnt from peers which are not installed in kernel are
advertised to peers. This can cause routers to send traffic to these
destinations only to get dropped. The fix is to provide a configurable
option "bgp suppress-fib-pending". When the option is enabled, bgp will
advertise routes only if it these are successfully installed in kernel.
Fix (Part1) :
* Added message ZEBRA_ROUTE_NOTIFY_REQUEST used by client to request
FIB install status for routes
* Added AFI/SAFI to ZAPI messages
* Modified the functions zapi_route_notify_decode(), zsend_route_notify_owner()
and route_notify_internal() to include AFI, SAFI as parameters
Signed-off-by: kssoman <somanks@gmail.com>
gcc 10 complains about some of our format specs, fix them. Use
atomic size_t in thread stats, to work around platform
differences.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Manage the main pthread's signal mask to avoid a signal-handling
race. Before entering poll, check for pending signals that the
application needs to handle. Use ppoll() to re-enable those
signals during the poll call.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add an api that blocks application-handled signals (SIGINT,
SIGTERM, e.g.) then tests whether any signals have been received.
This helps to manage a race between signal reception and the poll
call in the main event loop.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
json_array_string_add is used to add a string entry into a JSON
list. This API is needed by zebra so moving it from bgpd to lib.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
DF (Designated forwarder) election is used for picking a single
BUM-traffic forwarded per-ES. RFC7432 specifies a mechanism called
service carving for DF election. However that mechanism has many
disadvantages -
1. LBs poorly.
2. Doesn't allow for a controlled failover needed in upgrade
scenarios.
3. Not easy to hw accelerate.
To fix the poor performance of service carving alternate DF mechanisms
have been proposed via the following drafts -
draft-ietf-bess-evpn-df-election-framework
draft-ietf-bess-evpn-pref-df
This commit adds support for the pref-df election mechanism which
is used as the default. Other mechanisms including service-carving
may be added later.
In this mechanism one switch on an ES is elected as DF based on the
preference value; higher preference wins with IP address acting
as the tie-breaker (lower-IP wins if pref value is the same).
Sample output
=============
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn es 03:00:00:00:00:01:11:00:00:01
ESI: 03:00:00:00:00:01:11:00:00:01
Type: LR
RD: 27.0.0.15:6
Originator-IP: 27.0.0.15
Local ES DF preference: 100
VNI Count: 10
Remote VNI Count: 10
Inconsistent VNI VTEP Count: 0
Inconsistencies: -
VTEPs:
27.0.0.16 flags: EA df_alg: preference df_pref: 32767
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn route esi 03:00:00:00:00:01:11:00:00:01
*> [4]:[03:00:00:00:00:01:11:00:00:01]:[32]:[27.0.0.15]
27.0.0.15 32768 i
ET:8 ES-Import-Rt:00:00:00:00:01:11 DF: (alg: 2, pref: 100)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
In transactional cli mode, bgp address-family <afi> <afi>
node builds xpath on top of `router bgp` node's xpath.
When `exit` is applied under afi-safi commands, retain
xpath_index to 1 to keep using bgp global xpath.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Make it possible to load YANG modules outside the main northbound
initialization. The primary use case is to support YANG modules
that are specific to an FRR plugin. Example: only load the PCEP
YANG module when the corresponding FRR plugin is loaded. Other use
cases might arise in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Combine yang_snodes_iterate_module() and yang_snodes_iterate_all()
into an unified yang_snodes_iterate() function, where the first
"module" parameter is optional. There's no point in having two
separate YANG schema iteration functions anymore now that they are
too similar.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The only safe way to iterate over all schema nodes of a given YANG
module is by iterating over all schema nodes of all YANG modules
and filter out the nodes that belong to other modules.
The original yang_snodes_iterate_module() code did the following:
1 - Iterate over all top-level schema nodes of the given module;
2 - Iterate over all augmentations of the given module.
While that iteration strategy is more efficient, it does't handle
well more complex YANG hierarchies containing nested augmentations
or self-augmenting modules. Any iteration that isn't done on the
resolved YANG data hierarchy is fragile and prone to errors.
Fixes regression introduced by commit 8a923b4851 where the
gen_northbound_callbacks tool was generating duplicate callbacks
for certain modules.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
- tracepoint() -> frrtrace()
- tracelog() -> frrtracelog()
- tracepoint_enabled() -> frrtrace_enabled()
Also removes copypasta'd #ifdefs for those LTTng macros, those are
handled in lib/trace.h
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Previous commits added LTTng tracepoints. This was primarily for testing
/ trial purposes; in practice we'd like to support arbitrary tracing
methods, and especially USDT probes, which SystemTap and dtrace expect,
and which are supported on at least one flavor of BSD (FreeBSD).
To that end this patch adds an frr-specific tracing macro, frrtrace(),
which proxies into either DTRACE_PROBEn() or tracepoint() macros
depending on whether --enable-usdt or --enable-lttng is passed at
compile time.
At some point this could be tweaked to allow compiling in both types of
probes. Ideally there should be some logic there to use LTTng's optional
support for generating USDT probes when both are requested.
No additional libraries are required to use USDT, since these probes are
a kernel feature and only need the <sys/sdt.h> header.
- add --enable-usdt to toggle use of LTTng tracepoints or USDT probes
- add new trace.h library header for use with tracepoint definition
headers
- add frrtrace() wrapper macro; this should be used to define
tracepoints instead of using tracepoint() or DTRACE_PROBEn()
Compilation with USDT does nothing as of this commit; the existing LTTng
tracepoints need to be converted to use the frrtrace*() macros in a
subsequent commit.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
hash_get is used for both lookup and insert; add a tracepoint for when
we insert something into the hash
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
LTTng supports tracef() and tracelog() macros, which work like printf,
and are used to ease transition between logging and tracing. Messages
printed using these macros end up as trace events. For our uses we are
not interested in dropping logging, but it is nice to get log messages
in trace output, so I've added a call to tracelog() in zlog that dumps
our zlog messages as trace events.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
This commit adds initial support for LTTng.
When --enable-lttng=no or is not specified, no tracing code is included.
When --enable-lttng=yes, LTTng tracing events are (will be) generated.
configure.ac:
- add --enable-lttng
- define HAVE_LTTNG when enabled
- minimum LTTng version: 2.12.0
lib:
- add trace.[ch]
- update subdir.am
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Convert over to using the %pFX and %pRN modifiers
to output strings to allow us to consolidate on
one standard for printing prefixes.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Create appropriate accessor functions for the rn->lock
data. We should be accessing this data through accessor
functions since it is private data to the data structure.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently the prefix length M must be less than Y.
Relax this restriction to allow M to be less than or equal
to Y.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We have 2 different routines to turn an evpn route into a string.
This commit aligns the two to the latest maintained version as a
first step in removing one of them.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Consolidate evpn type help strings into one single
macro for use on commands that need to support all
the types.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We have this pattern in the code base:
if (thread)
THREAD_OFF(thread);
If we look at THREAD_OFF we check to see if thread
is non-null too. So we have a double check.
This is unnecessary. Convert to just using THREAD_OFF
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Display human readable error message in northbound rpc
transaction failure. In case of vtysh nb client, the error
message will be displayed to user.
Testing:
bharat# clear evpn dup-addr vni 1002 ip 11.11.11.11
Error type: generic error
Error description: Requested IP's associated MAC aa:aa:aa:aa:aa:aa is still
in duplicate state
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Don't attempt to compress the wildcard information to fit a `/M`, but
use its own full 4 byte field.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Remove the nexthop_same_firsthop() api and just call nexthop_same().
Not entirely sure why we were using this function in the first place,
but now we are just marking dupes with it so lets just call a
common function and avoid issues.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
* remove pre-generation of route_types.h from configure
This change is a partial revert of commit 306ed6816. This is a little
drawback, but at least "make lib/libfrr.la", mentioned in the commit,
still works because route_types.h is forced to be built in f1b32b2e5.
* add "enabled" field to route_types.txt to track which daemon should
be enabled to add the routing protocol to "show ip route" header and
to redistribution list
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This function returns true on success and false otherwise. Returning -1
on error is equivalent to returning true.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Add the zapi code for encoding/decoding of backup nexthops for when
we are ready for it, but disable it for now so that we revert
to the old way with them.
When zebra gets a proto-NHG with a backup in it, we early fail and
tell the upper level proto. In this case sharpd. Sharpd then reverts
to the old way of installation with the route.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Align the zapi NHG apis to be more consistent with the zapi_route
apis. Add a struct zapi_nhg to use for encodings as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add some header documentation to make it clear that you
cannot delete more than one item during each iteration.
Doing so could cause memory corruption for next pointer
if its also deleted from the table.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add the proto Nexthop Group Notify Owner header to
the log command types for string conversion.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Make the message parameters align better with other zapi
notifications and change the ID to correctly be a uint32.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add logging info for the new zapi ZEBRA_NHG_ADD[DEL]
message types. With this patch, they are logged properly
when debugs are turned on.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a command `set installable` that allows configured nexthop
groups to be treated as separate/installable objects in the RIB.
A callback needs to be implemented per daemon to handle installing
the NHG into the rib via zapi when this command is set. This
patch includes the implementation for sharpd.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add setting the onlink flag to the zapi_nh conversion
helper function so that we can set the onlink flag with
it when passing down NHGs from upper level protos.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Determine the NHG ID spacing and lower bound with ZEBRA_ROUTE_MAX
in macros.
Directly set the upperbound to be the lower 28bits of the uint32_t ID
space (the top 4 are reserved for l2-NHGs). Round that number down
a bit to make it more even.
Convert all former lower_bound calls to just use the macro.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a command/functionality to only install proto-based nexthops.
That is nexthops owned/created by upper level protocols, not ones
implicitly created by zebra.
There are some scenarios where you would not want zebra to be
arbitrarily installing nexthop groups and but you still want
to use ones you have control over via lib/nexthop_group config
and an upper level protocol.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Implement the underlying zebra functionality to Add/Del an
internal zebra and kernel NHG.
These NHGs are managed by the upperlevel protocols that send them
down via zapi messaging.
They are not put into the overall zebra NHG hash table and only
put into to the ID table. Therefore, different protos cannot
and will not share NHGs.
The proto is also set appropriately when sent to the kernel.
Expand the separation of Zebra hashed/shared/created NHGs and
proto created and mangaged NHGs.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Modify the send down of a route to use the nexthop group id
if we have one associated with the route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to send a NHG from an upper level protocol down to
zebra. ZAPI_NHG_ADD encompasses both the addition and replace
semantics ( If the id passed down does not exist yet, it's Add,
else it's a replace ).
Effectively zebra will take this nhg passed down save the nhg
in the id hash for nhg's and then create the appropriate nhg's
and finally install them into the linux kernel. Notification
will be the ZAPI_NHG_NOTIFY_OWNER zapi message for normal
success/failure messaging to the installing protocol.
This work is being done to allow us to work with EVPN MH
which needs the ability to modify NHG's that BGP will own
and operate on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add new function zclient_get_nhg_start that will allow an
upper level protocol to get a starting point for it's own
nhg space. Give each protocol a space of 50 million.
zebra will own the space from 0 - 199999999 because
of SYSTEM, KERNEL and CONNECT route types.
This is the start of some work that will allow upper
level protocols to install and maintain their own NHG's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When calling yang_snodes_iterate_subtree we don't care about
the return code. So explicitly say we don't care so that
SA tools can be on the same page as us.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The linux kernel is getting RTM_F_TRAP and RTM_F_OFFLOAD for
kernel routes that have an underlying asic offload. Write the
code to receive these notifications from the linux kernel and
to store that data for display about the routes.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The Solaris code has gone through a deprecation cycle. No-one
has said anything to us and worse of all we don't have any test
systems running Solaris to know if we are making changes that
are breaking on Solaris. Remove it from the system so
we can clean up a bit.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
* use actual error code instead of "false"
* add missing new line
Before:
```
nfware# show interface | include (a]
% Regex compilation error: Success% Bad regexp '(a]'
% Unknown command: show interface | include (a]
```
After:
```
nfware# show interface | include (a]
% Regex compilation error: Unmatched ( or \(
% Bad regexp '(a]'
% Unknown command: show interface | include (a]
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
