Remove awful test of a strmatch against a call to get_afi_safi_str.
These are the easy ones as that the real decision point is/was
underneath this test. This is just duplicate expensive testing.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
evpn route-map match (filter) on vni is not working
at the origin of the routes.
evpn match vni route checks for encap type as vxlan.
the source route attribute is not set with vxlan encap
thus the match filter wouldn't work.
Ticket:CM-32554
Reviewed By:CCR-11056
Testing Done:
At source have match vni plus set statement in route-map.
Validate the origin of the route's outbound correctly sets
the 'set' statment based on match vni filter.
At origin:
route-map RM-EVPN-TE-Matches permit 10
match evpn vni 4001
set large-community 10:10:119
Receiving end:
Route [5]:[0]:[24]:[78.41.1.0] VNI 4001
5550
27.0.0.15 from TORS1(downlink-5) (27.0.0.15)
Origin incomplete, metric 0, valid, external, bestpath-from-AS 5550, best (First path received)
Extended Community: RT:5550:4001 ET:8 Rmac:00:02:00:00:00:4d
Large Community: 10:10:119 <--- Large community stamped
Last update: Thu Dec 10 22:19:26 2020
Signed-off-by: Chirag Shah <chirag@nvidia.com>
On top of the recent `bgp suppress-fib-pending which
was at a BGP_NODE level, add this command at the CONFIG_NODE
level as well and allow the command to apply to all instances
of bgp running.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Use user provided AD for local routes (aggregate).
address-family ipv4 unicast
distance bgp 20 200 210
network 47.2.2.8/30
aggregate-address 51.1.0.0/16
Testing Done:
Before aggr route uses default 200 AD even user provided local AD.
B>* 51.1.0.0/16 [200/0] unreachable (blackhole), weight 1, 00:01:14
After:
B>* 51.1.0.0/16 [210/0] unreachable (blackhole), weight 1, 00:00:01
Signed-off-by: Chirag Shah <chirag@nvidia.com>
Add a bit of code to allow bgp to send the AS-Path associated with
the route being installed to zebra so it can be displayed and
used as part of the `show ip route A` command in zebra.
eva# show ip route 20.0.0.0/11
Routing entry for 20.0.0.0/11
Known via "bgp", distance 20, metric 0, best
Last update 00:00:00 ago
* 192.168.161.1, via enp39s0, weight 1
AS-Path: 60000 64539 15096 6939 8075
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
bgp aggregate address installs route with self peer which
can have peer->su of unspecifed type.
bgp_distance_apply bailed out as it fails to parse
sockunion2hostprefix for af type unspec.
config:
address-family ipv4 unicast
aggregate-address 50.1.0.0/16 summary-only
Testing Done:
Before:
B>* 50.1.0.0/16 [20/0] unreachable (blackhole), weight 1, 00:00:02
After:
B>* 50.1.0.0/16 [200/0] unreachable (blackhole), weight 1, 00:01:28
Signed-off-by: Chirag Shah <chirag@nvidia.com>
In bgp_zebra_announce when iterating over multipath
we were checking to ensure that the nexthop was updated
but never initially clearing the nh_updated variable.
Thus leading to a situation where we could crash.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
For each afi/safi of 'show bgp summary', display the peer description
each time needed. This information is useful, for instance in the case
of a device connected with multiple peers.
The topotest all_protocol_startup is changed accordingly.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
in the rare situation where we allocate the ES during the path link
we fail to check/store the allocated ES pointer thus leading to a
NULL dereference later in the function.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Two L3 next groups are installed per-VRF per-ES for v4 and v6. These
NHGs are used as an indirect destination for symmetric IRB host routes.
Using L3NHGs allows for efficient failover of an ES (similar to the
use of L2NHGs) i.e. when an ES goes down the number of dataplane
updates are limited to 2xN (where N is the number of tenant VRFs
associated with the ES) instead of updating all host-routes behind the
ES.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Host routes imported into the VRF can have a destination ES (per-VRF)
which is set up as a L3NHG for efficient failover.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
1. MAC-IP routes in the VPN routing table are linked to the
destination ES for efficient handling for remote ES link flaps.
2. Only MAC-IP paths whose nexthops are active (added via EAD-ES)
are imported into the VRF routing table.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
ES-VRF entries are maintained for the purpose of L3-NHG creation -
1. Each ES-EVI entry is associated with a tenant VRF. This associaton
triggers the creation of an ES-VRF entry.
2. Type-2/MAC-IP routes are imported into a tenant VRF and programmed as
a /32 or host route entry in the dataplane. If the destination of
the host route is a remote-ES the route is programmed with the
corresponding (keyed in by {vrf,ES-id}) L3-NHG.
3. The reason for this indirection (route->L3-NHG, L3-NHG->list-of-VTEPs)
is to avoid route updates to the dplane when a remote-ES link flaps i.e.
instead of updating all the dependent routes the NHG's contents are
updated. This reduces the amount of dataplane updates (fewer nhg updates vs.
route updates) allowing for a faster failover.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Local attached hosts are routed via the access ports using the neigh and
fdb/MAC dplane entries.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Current code when we are establishing a peering relationship when
under the HAVE_CUMULUS block will dissallow v4/v6 connections if
we do not have v4/v6 addresses applied. This restriction is
a bit harsh and should be allowed but warned against.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
problem
1. run the bgp with -e1 option
2. c t
router bgp 100
3. show running config
!
address-family ipv6 multicast
maximum-paths 1
maximum-paths ibgp 1
exit-address-family
!
address families should not dump maximum-paths if there
value is same as value provided at run time.
fix
if the maxpaths_ebgp value is same as multipath_num global
object, don't dump maximum-paths.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
