List the RP information we have configured.
Fix bug where we were not properly initializing some code
Ticket: CM-12617
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
I tried to be smart and skirt around rpf lookup if I knew
the incoming interface. This turns out to be not necessarily
a good thing because we can easily have asymetrical routing.
This fix removes the attempt to cache the ifp we received
the incoming packet on and just lets the lookup work like
it should.
Additionally it removes the weird hardcoding of the rpf
interface from the register stuff.
Ticket: CM-12530
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
reb
Just pass in the actual state to allow us to translate
the state to a string even if we don't have a upstream.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When there is allot of IGMP activity for the
kernel upcall that we are ignoring, just
ignore it for the moment as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the user to specify multiple rp commands.
'ip pim rp A.B.C.D' -> translates to 'ip pim rp A.G.C.D 224.0.0.0/24'
ip pim rp A.B.C.D A.B.C.D/M
First is the rp, second is the group with mask.
Groups and masks cannot be over each other except 224.0.0.0/24 which
is the fallback if used.
Ticket: CM-7860
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Refactor the qpim_rp into pim_rp.c so that the global data
is protected. This will allow us to easily add the group
ranges.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fix the struct prefix to be an actual struct prefix_sg.
This cleans up a bunch of code to make it look nicer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a *,G report is sent, the RPT and WC bits
are set as well as the source is the RP address
for the group.
If this routers idea of the RP for this group is
different than the idea of the RP from the sender
than that particular *,G can be dropped.
Ticket: CM-12031
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert ifchannel to use a prefix to store (s,g) information.
Additionally create pim_str_sg_dump function to output
data when using debugs.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This moves all install_element calls into the file where the DEFUNs are
located. This fixes several small related bugs:
- ospf6d wasn't installing a "no interface FOO" command
- zebra had a useless copy of "interface FOO"
- pimd's copy of "interface FOO" was not setting qobj_index, which means
"description LINE" commands would fail with an error
The next commit will do the actual act of making "foo_cmd" static.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Track whether or not if a mroute has been installed
or not. If not don't display information about it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'struct static_route' data structure duplicated a
decent bit of what is the in the struct channel_oil.
Refactor. This will set us up for further cleanup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the 'show ip pim upstream' command to
show the expected incoming interface for
the source.
Ticket: CM-11220
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we create the pim_ifp we need to see if this
interface allows us to elect our selves the RP.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the kernel sends a NOCACHE message to
pim we were looking up the interface to
use for the incoming multicast packet
based upon the source. No need to do
that trust that the kernel has properly
identified it and use that.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
zebra.h pulls in config.h, which results in fiddling with things like
__FILE_OFFSET_BITS. It must always be included first, in order to set
flags that influence the compiler via <features.h>.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit 821df2cf18e5978cc7ab532a8695444380d08270)
The linux kernel wants a pimreg vif device. The pimd
code wants a 'struct interface *' for anything it works
with. Since the pimreg vif device is not a real linux
device that zebra knows about. Cheat by creating
a pimreg interface pointer and setup the code to
properly be able to handle the registration of the vif
device.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This commit does two things:
(A) Sets up #defines for the pimreg to be used in pim_mroute.c
(B) Moves add_oif into pim_oil.c where it belongs
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add Source type for (S,G) mroute. This will allow us to know that
a (S,G) route came from an actual Source( ie the kernel called us
back with information about a multicast packet it received with
no mroute for it ).
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the process of creating the pimreg vif device so that
we can get the callbacks from the kernel with the multicast packets
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the user to specify the static Rendevous point
as well as specifying that an interface is Sparse Mode.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Create new per interface command:
'ip pim hello <1-180> {<1-180>}'
The first number is the Hello Timer for this interface
The second number is the Hold Timer to pass to neighbors on this interface.
The second number is optional.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
From RFC 4601, Section 4.3.1:
The DR_Priority Option allows a network administrator to give
preference to a particular router in the DR election process by
giving it a numerically larger DR Priority. The DR_Priority Option
SHOULD be included in every Hello message, even if no DR Priority is
explicitly configured on that interface. This is necessary because
priority-based DR election is only enabled when all neighbors on an
interface advertise that they are capable of using the DR_Priority
Option. The default priority is 1.
This modification allows the setting of the DR Priority on a per
interface basis.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Hi,
This patch adds the ability to configure multicast static routes
directly into pimd. Two source files are introduced to implement the new
feature in addition to changes to existing files.
Here is how it can be used the CLI:
interface <incoming interface>
ip mroute <outgoing interface> <group addr> #
for asm
or ip mroute <outgoing interface> <group addr> <source> # for ssm
Please let me know if you have any questions or concerns,
Regards,
Jafar
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'show debugging' cli as setup by pim collided with 'show debugging isis'.
Fix that and clean up cli help commands to actually display correctly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
ioctl values might be int or long, cast them to unsigned long for
consistent printing. (They're long on FreeBSD, but were printed with
%d.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The code in pimd needs to be updated to handle the changes
we've made to api's that it depends on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Welcome pimd to the Quagga daemon zoo!
This is a merge of commit 77ae369 ("pimd: Log ifindex found for an
interface when zebra lib reports a new connected address."), with
the intermediate "reconnect" changes removed (c9adf00...d274381).
d274381 is replaced with b162ab7, which includes some changes. In
addition, 4 reconnect-related changes and 1 cosmetic one have been
bumped out.
The rebase command used to produce the branch that is merged here is:
git rebase --onto b162ab7 c9adf00 77ae369
Note that 3 patches had their author rewritten from
"Anonymous SR#108542 <>" (which is not a valid git author ID)
to: "Savannah SR#108542 <nbahr@atcorp.com>" (which is the e-mail address
listed in the associated Savannah ticket)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
