Routes that have labels must be sent via a nexthop that also has labels.
This change notes whether any path in a nexthop update from zebra contains
labels. If so, then the nexthop is valid for routes that have labels.
If a nexthop update has no labeled paths, then any labeled routes
referencing the nexthop are marked not valid.
Add a route flag BGP_INFO_ANNC_NH_SELF that means "advertise myself
as nexthop when announcing" so that we can track our notion of the
nexthop without revealing it to peers.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
This command gives detail about a FS entry which contains an IP that
matches one of the rules of the FS entry. The output is the same output
as when one does show bgp ipv4 flowspec detail
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The json format is returd when requested from the two commands:
- show bgp ipv4 flowspec
- show bgp ipv4 flowspec detail
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The show bgp ipv4 flowspec routine is made available, displays the
flowspec rules contained in the BGP FIB database, as well as the actions
to be done on those rules. Two routines are available:
show bgp ipv4 flowspec
show bgp ipv4 flowspec detail
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Flowspec entries do not need aggregation feature.
Actually, all flowspec entries are unique.
So, some check is done against aggregate functionalities in the code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Ensure that only EVPN routes are flagged as such when installing into or
withdrawing from zebra, the earlier check broke L3VPN or VRF route-leaked
routes. Also, fix an incorrect check related to imported routes in path
selection.
Updates: bgpd: Use BGP_ROUTE_IMPORTED for EVPN [vivek]
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When uninstalling routes from zebra, ensure that the BGP instance for
which processing is being done is used to derive the VRF. It is incorrect
to derive the VRF from the peer when dealing with scenarios like VRF route
leaking, EVPN symmetric/external routing etc., where the peer which sourced
the route could belong to a different VRF.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ticket: CM-18413
Reviewed By: CCR-6778
Testing Done: Manual testing of BGP route withdraw/delete, bgp-min
When a peer is removed the routes are withdrawn via bgp_process_main_one
As such we need to put a bit of code in to handle this situation
for the vpn/vrf route leaking code.
I think this code path is also called for when a vrf's route is
changed and I believe we will end up putting a bit more code
here to handle the nexthop changes.
I've also started trying to document the bgp_process_main_one
function a bit better.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Set EVPN routes imported into a VRF to (sub)type BGP_ROUTE_IMPORTED and
use this for passing appropriate information to zebra. This is needed
because relying on the Router MAC for this purpose was incorrect and
impacted routing to/from external destinations, particularly for IPv6.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
In bgp_update_receive the first thing we do is establish
that the peer->status is Established. We then do a bunch
of work and call bgp_nlri_parse where we break out for
each address family. Each AFI is then checking for
being peer->status is Established again. There is no
point in checking this again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
- add "debug bgp vpn label" CLI
- improved debug messages for "debug bgp bestpath"
- send vrf label to zebra after zebra informs bgpd of vrf_id
- withdraw vrf_label from zebra if zebra informs bgpd that vrf_id is disabled
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Received PMSI tunnel attributes (in EVPN type-3 route) were not recognized.
Parse them and display the tunnel type when looking at routes. Note that
the only tunnel type currently supported is ingress replication (IR). A
warning message will be logged if the received tunnel type is something
else, but the attribute is otherwise ignored.
Updates: a21bd7a (bgpd: add PMSI_TUNNEL_ATTRIBUTE to EVPN IMET routes)
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Type-5 routes can be useful in multiple scenarios such as advertise-subnet,
default-originate etc. Currently, the code has a restriction that to allow
advertising type-5 routes, user has to first enable advertise ipvX command.
This restriction is not necessary and should be removed.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
EVPN type-2 and type-5 routes received with a L3 VNI and corresponding RTs
are installed into the appropriate BGP RIB. Ensure that these routes are not
re-injected back into EVPN as type-5 routes when type-5 advertisement is
enabled; only regular IPv4 routes (and IPv6 routes in future) in the RIB
should be injected into EVPN.
As a benefit of this change, no longer restrict that EVPN type-5 routes
should be non-host routes - i.e., allow /32 IPv4 routes (and /128 IPv6
routes in future).
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Ticket: CM-19456
Reviewed By: CCR-7117
Testing Done:
1. Manual replication of problem and verification of fix
2. evpn-min
Turns out we had 3 different ways to define labels
all of them overlapping with the same meanings.
Consolidate to 1. This one choosen is consistent
naming wise with what the *bsd and linux kernels
use.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When an IPv4 or IPv6 unicast route is injected into EVPN as a type-5 route
(upon user configuration), ensure that the source route (best path)'s path
attributes are used to build the EVPN type-5 route. This will result in
correct AS_PATH and ORIGIN attributes for the type-5 route so that it doesn't
appear that all type-5 routes are locally sourced. This is necessary to
ensure that external paths (IPv4 or IPv6 from EBGP peer) are preferred over
internal EVPN paths, if both exist.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Ticket: CM-19051
Reviewed By: CCR-7009
Testing Done: Verify failed scenario
In EVPN symmetric routing, not all subnets are presents everywhere.
We have multiple scenarios where a host might not get learned locally.
1. GARP miss
2. SVI down/up
3. Silent host
We need a mechanism to resolve such hosts. In order to achieve this,
we will be advertising a subnet route from a box and that box will help
in resolving the ARP to such hosts.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
When doing symmetric routing,
EVPN type-2 (MACIP) routes need to be advertised with two labels (VNIs)
the first being the L2 VNI (identifying the VLAN) and
the second being the L3 VNI (identifying the VRF).
The receive processing needs to handle one or two labels too.
Ticket: CM-18489
Review: CCR-6949
Testing: manual and bgp/evpn/mpls smoke
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
-Werror=sign-compare is failing with signed/unsigned usage
in the conditional expression.
Fixes: #1593
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problems reported with inconsistent use of parameters for bgp network
statements. Converted 12 DEFUNs to 2 DEFPY statements, making the
parameter use consistent with the exception of keeping the "backdoor"
keywork ipv4 only. Also verified that if a route-map or label-index
is specified in the "no" case it matches what had been previously
defined. Manual testing looks good and bgp-smoke will be performed
before pushing.
Ticket: CM-16860
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: CCR-7056
The json code was freeing json_paths and then
turning around and free'ing it again. Newer
versions of json-c have started to assert
this bad behavior.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
