Since f60a1188 we store a pointer to the VRF in the interface structure.
There's no need anymore to store a separate vrf_id field.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We should always treat the VRF interface as a loopback. Currently, this
is not the case, because in some old pre-VRF code we use if_is_loopback
instead of if_is_loopback_or_vrf. To avoid any future problems, the
proposal is to rename if_is_loopback_or_vrf to if_is_loopback and use it
everywhere. if_is_loopback is renamed to if_is_loopback_exact in case
it's ever needed, but currently it's not used anywhere.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We don't need to scan through all configured areas to find the circuit
associated with the interface. It is always stored in ifp->info.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, we have a lot of checks in CLI and NB layer to prevent
incompatible IS-types of circuits and areas. All these checks become
completely meaningless when the interface is moved between VRFs. If the
area IS-type is different in the new VRF, previously done checks mean
nothing and we still end up with incorrect circuit IS type. To actually
prevent incorrect IS type, all checks must be done in the processing
code.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When writing the config from the NB-converted daemon, we must not rely
on the operational data. This commit changes the output of the interface
configuration to use only config data. As the code is the same for all
daemons, move it to the lib and remove all the duplicated code.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The only difference in daemons' interface node definition is the config
write function. No need to define the node in every daemon, just pass
the callback as an argument to a library function and define the node
there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
isis_circuit_enable can be called for an already enabled circuit. In this
case we would add the circuit to the area multiple times.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Compile with v2.0.0 tag of `libyang2` branch of:
https://github.com/CESNET/libyang
staticd init load time of 10k routes now 6s vs ly1 time of 150s
Signed-off-by: Christian Hopps <chopps@labn.net>
YANG model and CLI commands allow user to configure LDP-sync per area.
But the actual implementation is incorrect - all commands are changing
the config for the whole VRF instead of a single area. This commit fixes
this issue by actually implementing per area configuration.
Fixes#8578.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently we don't allow to configure the interface before the area is
configured. This approach has the following issues:
1. The area config can be deleted even when we have an interface config
relying on it. The code is not ready for that - we'll have a whole
bunch of stale pointers if user does that.
2. The code doesn't correctly process the event of changing the VRF for
an interface. There is no mechanism to ensure that the area exists
in the new VRF so currently the circuit still stays in the old VRF.
This commit allows an arbitrary order of area/interface configuration.
There is no more need to configure the area before configuring the
interface.
This change fixes both the issues.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Call from isis_circuit_create works only if we enable isis on an already
existing interface. If we configure isis on a pseudo interface and then
actually create it - this call doesn't work.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Necessary structures for snmp-id generation are currently stored in
`struct isis`. When we generate the new circuit ID, we always use the
instance from the default VRF. When we free the circuit ID, we use the
instance from the circuit VRF. This causes the following problems:
1. If there is no instance in the default VRF, this code doesn't work.
2. When circuit in non-default VRF is deleted, the ID is not actually
freed.
This is fixed by using global structures instead. The code itself is
moved to isis_snmp.c and linked to the main code using hooks. We should
not call SNMP-related code when the SNMP module is not loaded at all.
More than that, we don't allow to activate the circuit if we failed to
generate the SNMP ID. Even if SNMP support is completely disabled! This
check is removed.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Convert most DEFINE_MTYPE into the _STATIC variant, and move the
remaining non-static ones to appropriate places.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add support for read only mib objects from RFC4444.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
The fields in the broadcast/p2p union struct in an isis circuit are
initialized when the circuit goes up, but currently this step is
skipped if the interface is passive. This can create problems if the
circuit type (referred to as network type in the config) changes from
broadcast to point-to-point. We can end up with the p2p neighbor
pointer pointing at some garbage left by the broadcast struct in the
union, which would then cause a segfault the first time we would
dereference it - for example when building the lsp, or computing the
SPF tree.
compressed backtrace of a possible crash:
#0 0x0000555555579a9c in lsp_build at frr/isisd/isis_lsp.c:1114
#1 0x000055555557a516 in lsp_regenerate at frr/isisd/isis_lsp.c:1301
#2 0x000055555557aa25 in lsp_refresh at frr/isisd/isis_lsp.c:1381
#3 0x00007ffff7b2622c in thread_call at frr/lib/thread.c:1549
#4 0x00007ffff7ad6df4 in frr_run at frr/lib/libfrr.c:1098
#5 0x000055555556b67f in main at frr/isisd/isis_main.c:272
isis_lsp.c:
1112 case CIRCUIT_T_P2P: {
1113 struct isis_adjacency *nei = circuit->u.p2p.neighbor;
1114 if (nei && nei->adj_state == ISIS_ADJ_UP
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The code in isisd uses `circuit->area->isis` all the time
but we know that circuit now has a valid `circuit->isis` pointer
so let's use that and cleanup the long dereference.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There are code paths where we were not always setting the
circuit->isis on creation. Fix that up so it will always
happen.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Added isis with different vrf and it's dependecies.
2. Added new vrf leaf in yang.
3. A minor change for IF_DOWN_FROM_Z passing argrument is
replaced with ifp pointer in api "isis_if_delete_hook()".
4. Minor fix in the isisd spf unit test.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
1. Created a structure "isis master".
2. All the changes are related to handle ISIS with different vrf.
3. A new variable added in structure "isis" to store the vrf name.
4. The display commands for isis is changed to support different VRFs.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
no need to check cicuit->area, as all code paths leading there
had already dereferenced it.
Fixes CID 1496314
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
if we shutdown an interface isisd will delete the adjacencies
on the corresponding circuit, but it will not log the change.
Fix it to make sure that each change is logged. Also specify
the level of the adjacency in the log message, while we are at it.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
before the last commit, it was possible under some
circumstances to call isis_circuit_af_set on a circuit
with a NULL area, e.g. if the circuit was deconfigured
due to a validation error. While this should not happen
now, let's add an explicit check to avoid crashing if
a regression is introduced.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
we were not correctly checking the MPLS-TE status of the area when
adding an IP address to a circuit, and this was preventing the local
address TLV to be populated after an interfaced flap.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
if mpls-te is enabled in the area, on creating a circuit we
must refresh the link params - else interfaces that are enabled
for IS-IS after configuring 'mpls-te on' will not correctly
advertise link parameters.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Since this command is modeled using YANG, it's already displayed
as part of the call to nb_cli_show_dnode_cmds(). Calling the
'isis_circuit_config_write' hook was only making that command
to be displayed twice.
The aforementioned hook is still necessary for fabricd, which wasn't
converted to the new northbound model yet.
Fixes#6281.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Some logging systems are, er, "allergic" to tabs in log messages.
(RFC5424: "The syslog application SHOULD avoid octet values below 32")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
when zebra detects that an interface is gone, notify the circuit but do
not disable it - the interface is still configured until it isn't.
Without this fix, removing the interface in the kernel and then removing
the circuit from the configuration would cause an assertion in isis_csm.c:78
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Rearrange the isisd northbound callbacks as following:
* isis_nb.h: prototypes of all northbound callbacks.
* isis_nb.c: definition of all northbound callbacks and their
associated YANG data paths.
* isis_nb_config.c: implementation of YANG configuration nodes.
* isis_nb_state.c: implementation of YANG state nodes.
* isis_nb_notifications.c: implementation of YANG notifications.
This should help to keep to code more organized and easier to
maintain.
No behavior changes intended.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>