the old VXLAN function for local MAC deletion was still in
existence and being called from the VXLAN code whilst the new
generic function was not being called at all. Resolve this so
the generic function matches the old function and is called
exclusively.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Create a function that can dump the mac->flags in human readable
output and convert all debugs to use it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
If a local-MAC or local-neigh is not active locally it is not sent to BGP.
At this point if BGP rxes a remote route it accepts it and installs in
zebra. Zebra was rejecting BGP's update if it had a higher seq local (inactive)
entry. This would result in bgp and zebra falling out of sync.
In some cases zebra would delete the local-inactive entries in sometime (as
a part of the dplane/kernel garbage collection). This would leave zebra
with missing remote entries (which were still present in bgpd).
This change allows lower-seq BGP updates to overwrite zebra's local entry if
that entry happens to be local-inactive.
Note: This logic was already in use for sync-mac-ip updates. Extended the
same logic to remote-mac-ip updates.
Ticket: CM-31626
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
If a remote MAC update is rxed from BGP with a lower sequence number than
the local one zebra ignores the MAC update. This typically happens if
there is a race condition (where updates are in flight from zebra to BGP).
There was a bug in zebra because of which the dest ES was being updated
before this check. This left the local MAC pointing to a remote ES.
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Relevant Dumps:
===============
root@leaf21:mgmt:~# net show evpn mac vni 101101 mac 00:93:00:00:00:01
MAC: 00:93:00:00:00:01
ESI: 03:00:00:00:77:01:03:00:00:0d
Intf: - VLAN: 101
Sync-info: neigh#: 1 peer-proxy
Local Seq: 3 Remote Seq: 0
Neighbors:
21.1.13.1 Active
root@leaf21:mgmt:~# net sho evpn es
Type: L local, R remote, N non-DF
ESI Type ES-IF VTEPs
03:00:00:00:77:01:02:00:00:0c R - 6.0.0.10,6.0.0.11
03:00:00:00:77:01:03:00:00:0d R - 6.0.0.10,6.0.0.11,6.0.0.12
03:00:00:00:77:01:04:00:00:0e R - 6.0.0.10,6.0.0.11,6.0.0.12,6.0.0.13
03:00:00:00:77:02:02:00:00:16 LR bondP2-H2 6.0.0.15
03:00:00:00:77:02:03:00:00:17 LR bondP2-H3 6.0.0.15,6.0.0.16
03:00:00:00:77:02:04:00:00:18 LR bondP2-H4 6.0.0.15,6.0.0.16,6.0.0.17
root@leaf21:mgmt:~#
Relevant logs:
===============
2020/07/29 15:41:27.110846 ZEBRA: Recv MACIP ADD VNI 101101 MAC 00:93:00:00:00:01 IP 21.1.13.1 flags 0x0 seq 2 VTEP 0.0.0.0 ESI 03:00:00:00:77:01:03:00:00:0d from bgp
2020/07/29 15:41:27.110867 ZEBRA: Ignore remote MACIP ADD VNI 101101 MAC 00:93:00:00:00:01 IP 21.1.13.1 as existing MAC has higher seq 3 flags 0x401
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Ticket: CM-30273
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
A MAC entry cannot be deleted while a neigh is referencing it. It seems
there is some race condition where this may be happening. The log is
to help identify those cases.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a local ES flaps there are two modes in which the local
MACs are failed over -
1. Fast failover - A backup NHG (ES-peer group) is programmed in the
dataplane per-access port. When a local ES flaps the MAC entries
are left unaltered i.e. pointing to the down access port. And the
dataplane redirects traffic destined to the oper-down access port
via the backup NHG.
2. Slow failover - This mode needs to be turned on to allow dataplanes
not capable of re-directing traffic. In this mode local MAC entries
on a down local ES are re-programmed to point to the ES-peers'
NHG. And vice-versa i.e. when the ES comes up the MAC entries
are re-programmed with the access port as dest.
Fast failover is on by default. Slow failover can be enabled via the
following config -
evpn mh redirect-off
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
As a part of extended MM handing a MAC can be updated from local
to remote while being referenced by SYNC neighs (this is really a
temporary/small window). During this window if the MAC transitions
back to local again we need to re-inforce the previous SYNC flags
(based on the sync-neigh count) as subsequent SYNC updates to the
MAC will be de-duped and ignored.
Ticket: CM-29636
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a local mac is deleted by the dataplane zebra can re-install it
if the MAC is a SYNC MAC (learned from ES peers). The "local_inactive"
bit must be set as a part of the re-install to prevent zebra turning
around and advertising the MAC as locally active.
Also fixed up some debug logs in the slow-fail path to include the VNI.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
NHG is activated i.e. programmed in the dataplane only if there
are active-VTEPs associated with it. When a NHG is de-activated
all the remote-mac entries associated with it need to be removed
before the NHG is removed.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
DAD is not supported currently with EVPN-MH so we turn it off internally
when the first ES config is detected.
PS: Note that when all local ESs are deleted DAD will stay off and
will need to be cleared via a daemon restart.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
When a MAC is detected duplicate on a local
learn event (with freeze action),
do not send update to bgp to advertise into
evpn control plane.
With evpn mh, inform_client flag is set and
sends notification to bgp albeit dup detect
is set.
Check mac are detected as duplicate before
setting inform_client to true.
Ticket:CM-29817
Reviewed By:CCR-10329
Testing Done:
Enable DAD with freeze action
Upon local learn MAC detected as duplica
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
this information is necessary for local information, because the
interface associated to the mac address is stored with its ifindex, and
the ifindex may not be enough to get to the right interface when it
comes with multiple network namespaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
extract mac_gateway add code from zevi_gw_macip_add and move it to
a new generic function zebra_evpn_mac_gw_macip_add in zebra_evpn_mac.c
Signed-off-by: Pat Ruddy <pat@voltanet.io>
extract generic local mac add code from zebra_vxlan_local_mac_del
into a new function zebra_evpn_del_local_mac in zebra_evpn_mac.c
Signed-off-by: Pat Ruddy <pat@voltanet.io>
extract the local mac add code from zebra_vxlan_local_mac_add_update
and create a new generic local mac add function
zebra_evpn_add_update_local_mac
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Move MAC add code from process_remote_macip_add in zebra_vxlan.c
to a generic function process_mac_remote_macip_add in
zebra_evpn_mac.c
Signed-off-by: Pat Ruddy <pat@voltanet.io>
clone zebra_vxlan.c to create a file zebra_evpn_mac.c for MAC dB
functions whilst retaining the history of zebra_vxlan.c
Signed-off-by: Pat Ruddy <pat@voltanet.io>
