Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Implement advertise-high-metrics set function - when advertise-high-metrics is configured, iterate through each isis interface and update each metric to its high metric value. When advertise-high-metrics is disabled, revert each interface's metric to its originally configured value.
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
New config and show functionality:
r1# conf
r1(config)# router isis 1
r1(config-router)#
advertise-high-metrics Advertise high metric value on all interfaces
area-password Configure the authentication password for an area
...
r1(config-router)# advertise-high-metrics
r1(config-router)# end
r1# show isis summary
...
Area 1:
Net: 49.0001.1720.1700.0002.00
TX counters per PDU type:
L2 IIH: 1
P2P IIH: 36
LSP RXMT: 0
RX counters per PDU type:
Advertise high metrics: Enabled
Level-2:
...
r1# conf
r1(config)# router isis 1
r1(config-router)# no advertise-high-metrics
r1(config-router)# end
r1# show isis summary
...
Area 1:
Net: 49.0001.1720.1700.0002.00
TX counters per PDU type:
L2 IIH: 1
P2P IIH: 45
LSP RXMT: 0
RX counters per PDU type:
Advertise high metrics: Disabled
Level-2:
...
r1#
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
Before:
isisd generates its initial lsp before fully processing the written config. Ex: lsp_generate() is called in isis_instance_area_address_create(), before other configs that may affect the lsp are loaded in, like set-overload-bit.
After:
isisd generates its initial lsp as soon as the config is fully processed. This was done by utilizing the initialization config callbacks, similar to bgp's implementation.
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
When a adjacency falls down, the primary routes are not deleted on the
dataplane until the SPF is recomputed. Even the backup routes are
pre-installed on the dataplane, there is no fast-route optimization.
Reasons for an adjacency to come down are:
- BFD down
- Hello timer timeout
- User adjacency clear
Apply the backup route switchover for fast-reroute as soon an IS-IS
adjacency falls down before the first SPF re-computation. Pre-computed
backup routes are applied sooner.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
There are lib debugs being set but never show up in
`show debug` commands because there was no way to show
that they were being used. Add a bit of infrastructure
to allow this and then use it for `debug route-map`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Before:
r1# conf
r1(config)# router isis <area-tag>
r1(config-router)# set-overload-bit
<cr>
r1(config-router)# end
After:
r1# conf
r1(config)# router isis <area-tag>
r1(config-router)# set-overload-bit
<cr>
on-startup Set overload bit on startup
r1(config-router)# set-overload-bit on-startup
(0-86400) Set overload time in seconds
r1(config-router)# set-overload-bit on-startup 300
r1(config-router)# end
Signed-off-by: Isabella de Leon <ideleon@microsoft.com>
==2623619==
==2623619== 6 bytes in 1 blocks are definitely lost in loss record 3 of 75
==2623619== at 0x483877F: malloc (vg_replace_malloc.c:307)
==2623619== by 0x4B55E4A: strdup (strdup.c:42)
==2623619== by 0x493C992: qstrdup (memory.c:128)
==2623619== by 0x1A9212: isis_instance_fast_reroute_level_1_remote_lfa_prefix_list_modify (isis_nb_config.c:1599)
==2623619== by 0x494837C: nb_callback_modify (northbound.c:1083)
==2623619== by 0x4948C6E: nb_callback_configuration (northbound.c:1352)
==2623619== by 0x494919D: nb_transaction_process (northbound.c:1473)
==2623619== by 0x4947DA9: nb_candidate_commit_apply (northbound.c:906)
==2623619== by 0x4947EBA: nb_candidate_commit (northbound.c:938)
==2623619== by 0x494EB9E: nb_cli_classic_commit (northbound_cli.c:64)
==2623619== by 0x494F3DC: nb_cli_apply_changes_internal (northbound_cli.c:250)
==2623619== by 0x494F4E2: nb_cli_apply_changes (northbound_cli.c:268)
==2623619== by 0x1BEF0F: isis_frr_remote_lfa_plist_magic (isis_cli.c:1899)
==2623619== by 0x1B7636: isis_frr_remote_lfa_plist (isis_cli_clippy.c:3406)
==2623619== by 0x48EBA75: cmd_execute_command_real (command.c:997)
==2623619== by 0x48EBD4E: cmd_execute_command_strict (command.c:1108)
==2623619== by 0x48EC1E6: command_config_read_one_line (command.c:1268)
==2623619== by 0x48EC35B: config_from_file (command.c:1313)
==2623619== by 0x4999CC1: vty_read_file (vty.c:2347)
==2623619== by 0x499A4AF: vty_read_config (vty.c:2567)
==2623619== by 0x4924B12: frr_config_read_in (libfrr.c:984)
==2623619== by 0x498F5E3: thread_call (thread.c:2008)
==2623619== by 0x49253DA: frr_run (libfrr.c:1198)
==2623619== by 0x14FC53: main (isis_main.c:273)
Fix this memory leak
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Runing most of isisd tests with --valgrind-memleaks give many memory errors.
This is due to the way isisd is stopped: performing a "no router isis XXX"
through CLI solves most of them. Indeed, isis_finish() doesn't call
isis_area_destroy() leaving many allocated memory unfreed.
This patch adds call to appropriate delete function or XFREE() when necessary to
properly free all alocated memory before terminating isisd.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
When a adjacency falls down, the primary routes are not deleted on the
dataplane until the SPF is recomputed. Even the backup routes are
pre-installed on the dataplane, there is no fast-route optimization.
Reasons for an adjacency to come down are:
- BFD down
- Hello timer timeout
- User adjacency clear
Apply the backup route switchover for fast-reroute as soon an IS-IS
adjacency falls down before the first SPF re-computation. Pre-computed
backup routes are applied sooner.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
In addition to turning on isis bfd debugging traces, the internal
bfd messaging debug is also enabled. Reversely, when isis bfd traces
are off, the internal messaging debug traces are off too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Currently, it is possible to rename the default VRF either by passing
`-o` option to zebra or by creating a file in `/var/run/netns` and
binding it to `/proc/self/ns/net`.
In both cases, only zebra knows about the rename and other daemons learn
about it only after they connect to zebra. This is a problem, because
daemons may read their config before they connect to zebra. To handle
this rename after the config is read, we have some special code in every
single daemon, which is not very bad but not desirable in my opinion.
But things are getting worse when we need to handle this in northbound
layer as we have to manually rewrite the config nodes. This approach is
already hacky, but still works as every daemon handles its own NB
structures. But it is completely incompatible with the central
management daemon architecture we are aiming for, as mgmtd doesn't even
have a connection with zebra to learn from it. And it shouldn't have it,
because operational state changes should never affect configuration.
To solve the problem and simplify the code, I propose to expand the `-o`
option to all daemons. By using the startup option, we let daemons know
about the rename before they read their configs so we don't need any
special code to deal with it. There's an easy way to pass the option to
all daemons by using `frr_global_options` variable.
Unfortunately, the second way of renaming by creating a file in
`/var/run/netns` is incompatible with the new mgmtd architecture.
Theoretically, we could force daemons to read their configs only after
they connect to zebra, but it means adding even more code to handle a
very specific use-case. And anyway this won't work for mgmtd as it
doesn't have a connection with zebra. So I had to remove this option.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
In order to provide Link State Traffic Engineering features to IS-IS, this
patch adds some modifications to base IS-IS:
- Solve bug in lsp iterate function to avoid infinite loop in isis_lsp.c by
adding condition to recurse call
- Add new trigger event to parse LSP in isis_lsp.c
- Add new TE debug flag to track Traffic Engineering events in isisd.[c,h]
- Correct small bug in isis_tlvs.c where delay and min/max delay are not
correctly handle
- Handle Opaque LSA Traffic Engineering Zebra API in isis_zebra.[c,h]
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Currently, we have a lot of checks in CLI and NB layer to prevent
incompatible IS-types of circuits and areas. All these checks become
completely meaningless when the interface is moved between VRFs. If the
area IS-type is different in the new VRF, previously done checks mean
nothing and we still end up with incorrect circuit IS type. To actually
prevent incorrect IS type, all checks must be done in the processing
code.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The problem is related to startup configuration, which is not operational
on default vrf name.
To reproduce the issue, run the two daemons:
zebra -o vrf0 &
isisd -f /tmp/isisd.conf
router isis 1
lsp-gen-interval 2
net 10.0000.0000.0000.0000.0000.0000.0000.0000.0000.00
metric-style wide
redistribute ipv4 connected level-2
redistribute ipv6 connected level-2
The obtained show running-config looks like below:
router isis 1 vrf default
lsp-gen-interval 2
net 10.0000.0000.0000.0000.0000.0000.0000.0000.0000.00
metric-style wide
redistribute ipv4 connected level-2
redistribute ipv6 connected level-2
The default vrf name is obtained by zebra daemon. While isis is not
connected to zebra, i.e. at startup, when loading a startup configuration,
the macro VRF_DEFAULT_NAME is used and returns 'default'.
But because zebra connected and forces to a new default vrf name, the
configuration is not seen as the default one, and further attempts to
configure the isis instance via 'router isis 1' will trigger creation
of an other instance.
To handle this situation, at vrf_enable() event, which is called for
each default vrf name change, the associated isis instance is updated
with th new vrf name. The same is done for NB yang path.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There are two problems with the current code for processing the attached
bit:
- we should process it when acting both a level-1-only and level-1-2
- we should add the default route when we don't have L2 adjacensies, not
when we don't have other routers configured on the device
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We are passing around the system id using the variable name
of `argv`. Let's name the variable correctly and pass it around
correctly named.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
in lsp_for_arg we have already checked for NULL and returned
if argv is null. We do not need to check for it again.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
