RFC-7607 specifically calls out the allowed usage
of AS 0 to signal that the a particular address is
not in use and should be guarded against. Add
the ability to specify this special AS in the rpki
commands.
eva# show rpki as-number 0
RPKI/RTR prefix table
Prefix Prefix Length Origin-AS
2.57.180.0 22 - 24 0
2.58.144.0 22 - 22 0
2.59.116.0 24 - 24 0
4.42.228.0 22 - 22 0
5.57.80.0 22 - 22 0
<snip>
2a13:df87:b400:: 38 - 38 0
2a13:df84:: 32 - 32 0
2630:: 16 - 16 0
Number of IPv4 Prefixes: 1166
Number of IPv6 Prefixes: 617
eva# show rpki prefix 2630::/16 0
Prefix Prefix Length Origin-AS
2630:: 16 - 16 0
eva#
Fixes: #15778
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The usage of the `bgp bestpath med missing-as-worst` command
was being accepted and applied during bestpath, but during output
of the routes affected by this it would not give any indication
that this was happening or what med value was being used.
Fixes: #15718
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This extends non-broadcast support to point-to-multipoint networks.
Neighbors will be explicitly configured and polled in lieu of multicast
dicovery. Toptotests and documentation updates are included.
Additionally, the ospf neighbor commands have been greatly simplified taking
advantage of DEFPY() capabilities.
The AllOSPFRouters (224.0.0.5) is still joined for non-broadcast networks
since it is joined for NBMA networks. It seems this could be removed but
it should done be in a separate commit.
Signed-off-by: Acee Lindem <acee@lindem.com>
lib: don't define a `fallthrough` in c++ to avoid conflict with protobuf c++
check: add link libs required by some versions of grpc++ or it's dependent
linked libs
tests: don't fail the test due to known at exit memleaks
Signed-off-by: Christian Hopps <chopps@labn.net>
Dynamic capability provides more value without resetting the sessions for some
important other capabilities to exchange, like: graceful-restart, addpath, orf,
fqdn, etc.
Since we support it already, enable it by default.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When building FRR with `--enable-dev-build`. Add a bit of
code to include the pointer value as part of the output.
Helps with tracking down issues and let's us see more data
when using the dev build option.
New output:
2024/03/08 19:48:56 BGP: [V0J1J-W5RHA] 11.0.20.1/32(0x5759ddf8d7c0) for 11.0.20.1/32
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The new `%w99d` fixed-width modifier still needs work in `frr-format`,
which unfortunately is not as trivial as `%b` was.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
checkpatch.pl wants you to use ARRAY_SIZE in a kernel
header file. We don't have access to this kernel header
file for normal compilation. I'm just going to remove it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
While checking the code, we can notice that they are already converted.
Suggested-by: Igor Ryzhov <iryzhov@nfware.com>
Signed-off-by: Vincent Jardin <vjardin@free.fr>
Not necessarily the correct place for this but there
is no other place and it needs to be called out and I
would rather have some documentation in place. Long
term I would like to add a bunch of frr_pthread documentation
but at this point in time it's not there. We can
re-arrange when that happens.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There was a question in regards to how the update-source
choose the ip address for the source when using the `update-source`
command in BGP. Upon looking at the code, I was a but surprised,
so I decided to document this behavior.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
