Back when I put this together in 2015, ISO C11 was still reasonably new
and we couldn't require it just yet. Without ISO C11, there is no
"good" way (only bad hacks) to require a semicolon after a macro that
ends with a function definition. And if you added one anyway, you'd get
"spurious semicolon" warnings on some compilers...
With C11, `_Static_assert()` at the end of a macro will make it so that
the semicolon is properly required, consumed, and not warned about.
Consistently requiring semicolons after "file-level" macros matches
Linux kernel coding style and helps some editors against mis-syntax'ing
these macros.
Signed-off-by: David Lamparter <equinox@diac24.net>
like it has been done for iptable contexts, a zebra dplane context is
created for each ipset/ipset entry event. The zebra_dplane_ctx job is
then enqueued and processed by separate thread. Like it has been done
for zebra_pbr_iptable context, the ipset and ipset entry contexts are
encapsulated into an union of structures in zebra_dplane_ctx.
There is a specificity in that when storing ipset_entry structure, there
was a backpointer pointer to the ipset structure that is necessary
to get some complementary information before calling the hook. The
proposal is to use an ipset_entry_info structure next to the ipset_entry,
in the zebra_dplane context. That information is used for ipset_entry
processing. The ipset name and the ipset type are the only fields
necessary.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The iptable processing was not handled in remote dataplane, and was
directly processed by the thread in charge of zapi calls. Now that call
can be handled in the zebra_dplane separate thread. once a
zebra_dplane_ctx is allocated for iptable handling, the hook call is
performed later. Subsequently, a return code may be triggered to zclient
interface if any problem occurs when calling the hook call.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Feature overview:
=================
A 802.3ad bond can be setup to allow lacp-bypass. This is done to enable
servers to pxe boot without a LACP license i.e. allows the bond to go oper
up (with a single link) without LACP converging.
If an ES-bond is oper-up in an "LACP-bypass" state MH treats it as a non-ES
bond. This involves the following special handling -
1. If the bond is in a bypass-state the associated ES is placed in a
bypass state.
2. If an ES is in a bypass state -
a. DF election is disabled (i.e. assumed DF)
b. SPH filter is not installed.
3. MACs learnt via the host bond are advertised with a zero ESI.
When the ES moves out of "bypass" the MACs are moved from a zero-ESI to
the correct non-zero id. This is treated as a local station move.
Implementation:
===============
When (a) an ES is detached from a hostbond or (b) an ES-bond goes into
LACP bypass zebra deletes all the local macs (with that ES as destination)
in the kernel and its local db. BGP re-sends any imported MAC-IP routes
that may exist with this ES destination as remote routes i.e. zebra can
end up programming a MAC that was perviously local as remote pointing
to a VTEP-ECMP group.
When an ES is attached to a hostbond or an ES-bond goes
LACP-up (out of bypss) zebra again deletes all the local macs in the
kernel and its local db. At this point BGP resends any imported MAC-IP
routes that may exist with this ES destination as sync routes i.e.
zebra can end up programming a MAC that was perviously remote
as local pointing to an access port.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
If the dataplane thread hits the work limit while processing the
output queue for any given provider, we now explicitly reschedule
the thread.
Otherwise, if the number of items in the output queue is greater than
the work limit, draining of that output queue is dependent on new
dataplane work.
Routes which are not drained from the output queue are stuck with
the 'q' flag, so this is a similar issue to that observed in
164d8e8608.
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
The way a couple of clauses were placed in a loop meant that
some info might not be collected - re-order things just a bit.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Returns the current number of (completed) contexts in the provider's
output queue (dp_ctx_out_q), allowing access to this data from the
provider itself.
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
Add the current queue depths for each plugin to the
'show dplane providers' output. Maintain the out-bound queue
max counter properly, that was being ignored.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add an api that allows a caller in the zebra main pthread to
process the queue of pending dplane updates. The caller supplies
a function to call to test each pending context. Selected
contexts are dequeued, and freed without being processed.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add extra data about the interfaces used in route updates'
nexthops - some consumers of route updates may want additional
data, but dataplane plugins running in the dplane pthread
cannot safely access the normal zebra data structures. Capturing
this info is optional - a plugin must request it (via an api).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
split horizon filter, non-DF block filter and backup nexthop group
are passed as bridge port attributes to the dataplane.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This includes -
1. non-DF block filter
2. List of es-peers that need to be blocked per-access port (for
split horizon filtering)
3. Backup nexthop group to failover local-es via the VxLAN overlay
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Limit the not re-installation of routes with the same NHG ID
to routes that are using the new NHG PROTO API. This would
only include sharpd and EVPN-MH for now.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When the dataplane detects that we have no need to
reinstall the same route, setup the NEXTHOP_FLAG_FIB
appropriately.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we have received a route that the already existing
route is exactly the same, just note that it happened
and move on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When installing rules pass by the interface name across
zapi.
This is being changed because we have a situation where
if you quickly create/destroy ephermeal interfaces under
linux the upper level protocol may be trying to add
a rule for a interface that does not quite exist
at the moment. Since ip rules actually want the
interface name ( to handle just this sort of situation )
convert over to passing the interface name and storing
it and using it in zebra.
Ticket: CM-31042
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
During testing it was noticed that routes were considered
installed by zebra, but the kernel did not have the route.
Upon close debugging of the rib it was noticed that FRR
was turning a dplane_ctx_route_init into a success and
FRR was now in a bad state.
2020/08/26 17:55:53.897436 PBR: route_notify_owner: [0.0.0.0/0] Route Removed succeeded for table: 10012
2020/08/26 17:55:53.897572 ZEBRA: 0.0.0.0/0: uptime == 432033, type == 24, instance == 0, table == 10012
2020/08/26 17:55:53.897622 ZEBRA: rib_meta_queue_add: (0:10012):0.0.0.0/0: queued rn 0x5566b0ea7680 into sub-queue 5
2020/08/26 17:55:53.907637 ZEBRA: default(0:10012):0.0.0.0/0: Processing rn 0x5566b0ea7680
2020/08/26 17:55:53.907665 ZEBRA: default(0:10012):0.0.0.0/0: Examine re 0x5566b0d01200 (pbr) status 2 flags 1 dist 200 metric 0
2020/08/26 17:55:53.907702 ZEBRA: default(0:10012):0.0.0.0/0: After processing: old_selected 0x0 new_selected 0x5566b0d01200 old_fib 0x0 new_fib 0x5566b0d01200
2020/08/26 17:55:53.907713 ZEBRA: default(0:10012):0.0.0.0/0: Adding route rn 0x5566b0ea7680, re 0x5566b0d01200 (pbr)
2020/08/26 17:55:53.907879 ZEBRA: default(0:10012):0.0.0.0/0: rn 0x5566b0ea7680 dequeued from sub-queue 5
2020/08/26 17:55:53.907943 ZEBRA: netlink_route_multipath: RTM_NEWROUTE 0.0.0.0/0 vrf 0(10012)
2020/08/26 17:55:53.910756 ZEBRA: default(0:10012):0.0.0.0/0 Processing dplane result ctx 0x5566b0ea82f0, op ROUTE_INSTALL result SUCCESS
2020/08/26 17:55:53.910769 ZEBRA: update_from_ctx: default(0:10012):0.0.0.0/0: SELECTED, re 0x5566b0d01200
2020/08/26 17:55:53.910785 ZEBRA: default(0:10012):0.0.0.0/0 update_from_ctx(): no fib nhg
2020/08/26 17:55:53.910793 ZEBRA: default(0:10012):0.0.0.0/0 update_from_ctx(): rib nhg matched, changed 'true'
2020/08/26 17:55:53.910802 ZEBRA: (0:10012):0.0.0.0/0: Redist update re 0x5566b0d01200 (pbr), old 0x0 (None)
2020/08/26 17:55:53.910812 ZEBRA: Notifying Owner: 24 about prefix 0.0.0.0/0(10012) 2 vrf: 0
2020/08/26 17:55:53.910912 PBR: route_notify_owner: [0.0.0.0/0] Route installed succeeded for table: 10012
2020/08/26 17:55:55.400516 ZEBRA: RTM_DELROUTE 0.0.0.0/0 vrf default(0) table_id: 10012 metric: 20 Admin Distance: 0
2020/08/26 17:55:55.400527 ZEBRA: rib_delete: (0:10012):0.0.0.0/0: rn 0x5566b0ea7680, re 0x5566b0d01200 (pbr) was deleted from kernel, adding
We were receiving a notification from the kernel that the route was deleted and deciding
that we needed to reinstall it. At that point in time when it got into the dplane
handlers to convert it to the dplane pthread, the dplane decided to drop the request
convert it too a success and not do anything.
This code change removes the conversion from this failure to success and
notifies the upper level about it. After this change the default route
to table 10012 is now properly marked as rejected:
root@mlx-2700-07:mgmt:/var/log/frr# vtysh -c "show ip route table 10012"
Codes: K - kernel route, C - connected, S - static, R - RIP,
O - OSPF, I - IS-IS, B - BGP, E - EIGRP, N - NHRP,
T - Table, v - VNC, V - VNC-Direct, A - Babel, D - SHARP,
F - PBR, f - OpenFabric,
> - selected route, * - FIB route, q - queued route, r - rejected route
VRF default table 10012:
F>r 0.0.0.0/0 [200/0] via 172.168.1.164, isp2-uplink (vrf PUBLIC), weight 1, 00:24:48
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are not using nexthop groups, there is no need to
test for whether or not they are installed correctly or not
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We can make the Linux kernel send an ARP/NDP request by adding
a neighbour with the 'NUD_INCOMPLETE' state and the 'NTF_USE' flag.
This commit adds new dataplane operation as well as new zapi message
to allow other daemons send ARP/NDP requests.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
Reverting probing of neigh entry. There is a timing where
probe and remote macip add request comes at the same time resulting
in neigh to remain in local state event though it should be remote.
In mobility case, the host moves to remote VTEP, first MAC only type-2
route is received which triggers a PROBE of neighs (associated to MAC).
PROBE request can go via network port to remote VTEP.
PROBE request picks up local neigh with MAC entry's outgoing port is
remote VTEP tunnel port.
The PROBE reply and MAC-IP (containing IP) almost comes same time at
DUT.
DUT first processes remote macip and installs neigh as remote.
Followed by receives neigh as REACHABLE which marks neigh as LOCAL.
FRR does have BPF filter which does not allow its own netlink request
to receive. Otherwise frr's request to program neigh as remote can move
neigh from local to remote.
Though ordering can not be guranteed that REACHABLE (PROBE's repsonse)
can come at anytime and move it to LOCAL.
This fix would not suffice the needs of converging LOCAL inactive neighs
to remove from DB. As mobility draft sugges to PROBE local neigh when
MAC moves to remote but it is not working with current framework.
Ticket:CM-22864
This reverts commit 44bc8ae550
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Multihoming support requires a new dataplane feature, MAC-ECMP, to
bridge traffic to remote ESs that are attached to more than one
active VTEP.
As a part of this support indirection has also been added via
L2-NHGs. Using a nexthop group allows for fast failover
of MAC entries when an access port attached to a remote-ES goes
down i.e. instead of updating many MAC entries this becomes a
single NHG update to the dataplane.
Note: Some of the code here needs to be reworked to the new
dataplane model.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Include any installed backup nexthops when installing
pseudowires; include installed backups in vty and json
pw show output.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Improve vty output for routes and lsps with backups, including
json. Simplify or correct some code that uses both primary and
backup nexthops in dplane, nht.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Include any installed backups when updating the local kernel
after processing an async notification. This includes routes'
nexthops and LSPs' nhlfes.
Add the 'b' character to the route show display and header to
indicate backup nexthops.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Extend PBR maps to discriminate by Differentiated Services Code Point and / or
Explicit Congestion Notification fields. These fields are used in the IP header
for classifying network traffic.
0 1 2 3 4 5 6 7
+-----+-----+-----+-----+-----+-----+-----+-----+
| DS FIELD, DSCP | ECN FIELD |
+-----+-----+-----+-----+-----+-----+-----+-----+
DSCP: differentiated services codepoint
ECN: Explicit Congestion Notification
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
Signed-off-by: Saurav Kumar Paul <saurav@cumulusnetworks.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
Add an init api (based on what had been a private/static api)
to allow a caller to init a context and use it to generate LSP
updates. This might be useful for testing, or from a dplane
plugin.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
We had special-cased use of atomic_add_fetch, because clang just
does not like that builtin. Just use atomic_fetch_add instead.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
* Implement new dataplane operations
* Convert existing code to use dataplane context object
* Modify function preparing netlink message to use dataplane
context object
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
This commit is the first step to convert IP rule installation to
use dplane thread.
* Add dataplane's internal representation of a pbr rule
* Add dplane stats related to rules
* Introduce a new type of dplane operation
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
Add the zebra_opaque module, designed to offload some opaque zapi
message processing to a new, dedicated pthread. Add to the build;
also re-sort the lists of zebra files in subdir.am.
Start, stop, and clean-up the opaque module, integrate with zebra
start and shutdown.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Handle backup nhlfes in LSP zapi messages. Capture backup info
with LSPs, capture backup info in the dataplane LSP processing.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Provide a way for the data plane to indicate pseudowire
status (such as: not forwarding, AC failure).
On a data plane pseudowire install failure, data plane
sets the pseudowire status.
Zebra relays the pseudowire status to LDP.
LDP includes the pseudowire status in the LDP notification
to the LDP peer.
Signed-off-by: Karen Schoener <karen@voltanet.io>
Implement the next hop group send on startup if you are using
them. Normally you will only have them if you are already using this
Linux kernel feature.
NOTE: to make sure all next hop groups exist, we send/enqueue all next
hop groups first and then we send routes. The RIB route walk start is
at the end of the function `fpm_nhg_send()`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Call the `dp_fini` callback twice: once at the beginning of the shutdown
and then again right before `exit()`ing zebra.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Store VNI information in the data plane context so we can use it to
build the FPM netlink update with that information later.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add a public reset api, so a context can be reset and reused;
add apis to init a context for a route or mac update.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use a backup index in a nexthop directly (if it has a backup
nexthop); revise the zebra nhe/nhg code; revise zapi route
decoding to match; revise the dataplane route datastructs.
Refactor some of the rib_add_multipath code to be prepared to
be called with an nhe, carrying nexthop and (possibly) backup
info together.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Embed nexthop-group, which is just a pointer, in the zebra
nexthop-hash-entry object, rather than mallocing one.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add an api that creates a copy of a list of nexthops and
enforces the canonical sort ordering; consolidate some nhg
code to avoid copy-and-paste. The zebra dplane uses
that api when a plugin sets up a list of nexthops, ensuring
that the plugin's list is ordered when it's processed in
zebra.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use correct state/flags when installing EVPN macs; when we
converted from raw netlink to the zebra dataplane, a state value
got lost.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The flags can be important - like "threaded" - so we need to
actually capture them when plugins are registered.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Replace the existing list of nexthops (via a nexthop_group
struct) in the route_entry with a direct pointer to zebra's
new shared group (from zebra_nhg.h). This allows more
direct access to that shared group and the info it carries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
For SR-TE we'll need to create Binding-SIDs which are essentially
LSPs that can push multiple outgoing labels. This commit sets the
groundwork for that. Luckily the netlink code didn't need to be
changed since it already supports pushing label stacks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This code is called from the zebra main pthread during shutdown
but the thread event is scheduled via the zebra dplane pthread.
Hence, we should be using the `thread_cancel_async()` API to
cancel the thread event on a different pthread.
This is only ever hit in the rare case that we still have work left
to do on the update queue during shutdown.
Found via zebra crash:
```
(gdb) bt
\#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:50
\#1 0x00007f4e4d3f7535 in __GI_abort () at abort.c:79
\#2 0x00007f4e4d3f740f in __assert_fail_base (fmt=0x7f4e4d559ee0 "%s%s%s:%u: %s%sAssertion `%s' failed.\n%n", assertion=0x7f4e4d9071d0 "master->owner == pthread_self()",
file=0x7f4e4d906cf8 "lib/thread.c", line=1185, function=<optimized out>) at assert.c:92
\#3 0x00007f4e4d405102 in __GI___assert_fail (assertion=assertion@entry=0x7f4e4d9071d0 "master->owner == pthread_self()", file=file@entry=0x7f4e4d906cf8 "lib/thread.c",
line=line@entry=1185, function=function@entry=0x7f4e4d906b68 <__PRETTY_FUNCTION__.15817> "thread_cancel") at assert.c:101
\#4 0x00007f4e4d8d095a in thread_cancel (thread=0x55b40d01a640) at lib/thread.c:1185
\#5 0x000055b40c291845 in zebra_dplane_shutdown () at zebra/zebra_dplane.c:3274
\#6 0x000055b40c27ee13 in zebra_finalize (dummy=<optimized out>) at zebra/main.c:202
\#7 0x00007f4e4d8d1416 in thread_call (thread=thread@entry=0x7ffcbbc08870) at lib/thread.c:1599
\#8 0x00007f4e4d8a1ef8 in frr_run (master=0x55b40ce35510) at lib/libfrr.c:1024
\#9 0x000055b40c270916 in main (argc=8, argv=0x7ffcbbc08c78) at zebra/main.c:483
(gdb) down
\#4 0x00007f4e4d8d095a in thread_cancel (thread=0x55b40d01a640) at lib/thread.c:1185
1185 assert(master->owner == pthread_self());
(gdb)
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
If the vrf lookup fails, use the default namespace
to find/delete the nexthop group from the kernel because it
should be there anyway.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When moving the nexthop group in a route entry to be a pointer,
we missed one wrapped in a `ifndef` for when the kernel doesn't
have netlink.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We do not need to check that the nexthop is installed or queued
when sending a route deletion since we only need to the prefix for it.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Move the supports_nh bool indicating whether the kernel we are
using supports nexthop objects into the netlink kernel interface
itself. Since only linux and netlink support nexthop object APIs
for now this is fine.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
On restart, if we failed to remove any nexthop objects due
to a kill -9 or such event, sweep them if we aren't using them.
Add a proto field to handle this and remove the is_kernel bool.
Add a dupicate flag that indicates this nexthop group is only
present in our ID hashtable. It is a dupicate nexthop we received
from the kernel, therefore we cannot hash on it.
Make the idcounter globally accessible so that kernel updates
increment it as soon as we receive them, not when we handle them.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Give all nhg_hash_entrys we install into the kernel
as nexthop objects a defined proto matching the zebra
rib table one. This makes sense since nhe's are proto-independent
and determined exclusively in zebra.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The kernel does not allow duplicate IDs in the same group, but
we are perfectly find with it internally if two different
nexthops resolve the the same nexthop (default route for instance).
So, we have to handle this when we get ready to install.
Further, pass the max group size in the arguments to ensure we
don't overflow. Don't actually think this is possible due to
multipath checking in nexthop_active_update() but better to be
safe.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Before we install a route, we verify that the nhg_hash_entry is installed.
Allow the nhe to be queued as well and still pass the route
install along.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Only remove a route if the nexthop it is using is still installed.
If a nexthop object is removed from the kernel, all routes referencing
it will be removed from the kernel.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add the ability to recursively resolve nexthop group hash entries
and resolve them when sending to the kernel.
When copying over nexthops into an NHE, copy resolved info as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Only queue a nexthop object update if the dataplane
supports nexthop objects. Otherwise, mark it as a success
since we should only me sending them to the kernel
if we think they are valid anywyay.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We will use a nhe context for dataplane interaction with
nextho group hash entries.
New nhe's from the kernel will be put into a group array
if they are a group and queued on the rib metaq to be processed
later.
New nhe's sent to the kernel will be set on the dataplane context
with approprate ID's in the group array if needed.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Create a nhg_depenents tree that will function as a way
to get back pointers for NHE's depending on it.
Abstract the RB nodes into nhg_connected for both depends and
dependents. This same struct is used for both.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Update the dataplane nexthop ctx to use the nhg_depend_dup_list()
function for copying over the dependencies into its context.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Simplify the code for nexthop hash entry creation. I made nexthop
hash entry creation expect the nexthop group and depends to always
be allocated before lookup. Before, it was only allocated if it had
dependencies. I think it makes the code a bit more readable to go
ahead an allocate even for single nexthops as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The nexthop dataplane context was not getting populated with
namespace info for its netlink messages. Fixed this to do
lookups the same way we do it with route contexts.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add all the neccessary code to allow nexthops to be processed
in separate dataplane contexts with the netlink dataplane kernel
provider.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
In the route_entry we are keeping a non pointer based
nexthop group, switch the code to use a pointer for all
operations here and ensure we create and delete the memory.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the (single) dataplane config value to the output of
config write, 'show run' - missed this during dplane development.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Some netlink-facing code used for evpn/vxlan programming was
being run in the dataplane pthread, but accessing zebra core
datastructs. Move some additional data into the dataplane
context, and use it in the netlink path instead.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Move neighbor programming to the dataplane; remove
old apis; remove some ifdef'd use of direct netlink
code points, using neutral values outside of the netlink-
specific files.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The `destination` field of the connection structure was used to store
the broadcast address, if the connection was not p2p. This multipurpose
is not very evident and the benefits over calculating the bcast address
on the fly minimal.
Signed-off-by: Juergen Werner <juergen@opensourcerouting.org>
Update the stats displayed by 'show zebra dplane' - some
counters had been added but not displayed. Also include
the new counters for evpn macs.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Initial data struct and api changes to support EVPN MAC
updates via the dataplane subsystem (no handlers yet).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This is mostly relevant for Solaris, where config.h sets up some #define
that affect overall header behaviour, so it needs to be before anything
else.
Signed-off-by: David Lamparter <equinox@diac24.net>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Some updates may be the result of a plugin's actions - such
as an async notification. Add accessor so that we can
identify that an update was generated by a plugin.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a callback called at start time, once the dplane pthread
and thread_master are available. The callback is optional.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
No need to check for non-null ctx at this point in the
function as that it has already been derefed.
Signed-off-by: donald Sharp ,sahrpd@cumulusnetworks.com>
Start using the dataplane for interface-address programming,
on netlink platforms. Other platforms just stubbed at this
point.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use const in the accessors for pseudowire nhlfe data; pull
that through the kernel-facing apis that use that data.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
In prep for adding nexthop info for pws, rename the accessor
for the pw destination. Add a nexthop-group to the pw
data in the dataplane module.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The master thread handler is really part of the zrouter structure.
So let's move it over to that. Eventually zserv.h will only be
used for zapi messages.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The sequence number used should be unique and increase by 1
for netlink commands. This will allow the code to match
up batched commands to actual requests, so that we can signal
the failure correctly back.
So start the movement and tracking of sequence numbers as
an atomic uint32_t in zebra_router. Modify the dataplane
code to start tracking contexts from this value.
In future commits we will move more of the sequencing
data into using this value.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Adding infra to zebra dplane to support LSP updates. Add
kernel api for LSP updates that uses a dataplane context; add
stub apis for netlink, bsd, and 'null' kernel paths. Add
version of netlink mpls update code that takes a dplane
context struct instead of a zebra lsp struct.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
