When the label manager is unable to provide a label chunk to
a routing service, an error message is displayed:
> Oct 11 11:47:27 vsr zebra[163745]: [YMY6E-K9JYD][EC 4043309085] Unable to assign Label Chunk to bgp instance 0
There is missing information on the range that was requested.
Add this information in the log message.
> Oct 11 11:47:27 vsr zebra[163745]: [YMY6E-K9JYD][EC 4043309085] Unable to assign Label Chunk 60 - 60 to bgp instance 0
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
(cherry picked from commit 1cedcf7b15)
This function lm_get_chunk_response() is only called
by label_manager_get_chunk(). Let us move the code of
the function in the caller.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
(cherry picked from commit 6988622832)
In zebra/label_manager.c the releasing of the label chunk is done by
disowning the chunk to the system. The presence of this system label
chunk will cause label assignment to fail for this use case example:
label chunk ospf: 300-320
label chunk system: 510-520
label chunk isis: 1200-1300
Then we try to allocate the chunk 500-530, we get this error:
"Allocation of mpls label chunk [500/530] failed"
The error is raised when the below condition is true:
/* if chunk is used, cannot honor request */
if (lmc->proto != NO_PROTO)
return NULL;
Delete the label chunk instead of disowning it when the label releasing
is done.
Signed-off-by: Farid MIHOUB <farid.mihoub@6wind.com>
Add the new command "show debugging labeltable" to show allocated label
chunks in the label table managed with label_manager.c
Signed-off-by: Farid Mihoub <farid.mihoub@6wind.com>
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when checking if there is a "hole" behind the current reservation
marker the calculation of whether the hole is big enough to satisfy
the requested chunk is out by 1. This could result in returning a label
which has already been allocated.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
if the requested chunk size was less than 16 then a chunk
within the reserved block would be returned. Make sure that
we never return labels that are below MPLS_LABEL_UNRESERVED_MIN
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Following functions which is a piece of label-maanager implementation
isn't called from out side of its file. And all lines of label-manager
are coded on zebra/label_manager.c at this time. So these functions
should be unexposed.
Functions:
- create_label_chunk
- assign_label_chunk
- delete_label_chunk
- release_label_chunk
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
For allocating a new label range the label manager will loop
the existing label chunks and compare the start and end labels
with the label range in question. In case a label range should
be re-allocated to the existing label chunk, the end label
of the chunk is not honored correctly, e.g. the new label
range has to be a true subset of the existing label chunk.
This is very easy reproducable by re-allocating a single label.
e.g. a label range of size 1.
This problem is fixed by allowing the mentioned 'end' labels to
be equal.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Use the zapi client session id in the label manager apis;
use the client struct directly in some code. Assign a session
id to ldpd's sync LM zapi session.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
zebra should only check whether a get_chunk operation succeeded
when processing the response, rather than insde the get_chunk
call itself. Spllitting the request and response hooks was done
precisely to allow for asynchronous calls to an external label
manager; in this case, the requested chunk is not necessarily
going to be available at request time.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
==25402==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 16 byte(s) in 1 object(s) allocated from:
#0 0x533302 in calloc (/usr/lib/frr/zebra+0x533302)
#1 0x7fee84cdc80b in qcalloc /home/qlyoung/frr/lib/memory.c:110:27
#2 0x5a3032 in create_label_chunk /home/qlyoung/frr/zebra/label_manager.c:188:3
#3 0x5a3c2b in assign_label_chunk /home/qlyoung/frr/zebra/label_manager.c:354:8
#4 0x5a2a38 in label_manager_get_chunk /home/qlyoung/frr/zebra/label_manager.c:424:9
#5 0x5a1412 in hook_call_lm_get_chunk /home/qlyoung/frr/zebra/label_manager.c:60:1
#6 0x5a1412 in lm_get_chunk_call /home/qlyoung/frr/zebra/label_manager.c:81:2
#7 0x72a234 in zread_get_label_chunk /home/qlyoung/frr/zebra/zapi_msg.c:2026:2
#8 0x72a234 in zread_label_manager_request /home/qlyoung/frr/zebra/zapi_msg.c:2073:4
#9 0x73150c in zserv_handle_commands /home/qlyoung/frr/zebra/zapi_msg.c:2688:2
When creating label chunk that has a specified base, we eventually are
calling assign_specific_label_chunk. This function finds the appropriate
list node and deletes it from the lbl_mgr.lc_list but since
the function uses list_delete_node() the deletion function that is
specified for lbl_mgr.lc_list is not called thus dropping the memory.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
in order to both streamline the code and allow users to
define their own specialized versions of the LM api handlers,
define hooks for the 4 main primitives offered by the label
manager (i.e. connect, disconnect, get_chunk and release_chunk),
and have the existing code be run in response to a hook_call.
Additionally, have the responses to the requesting daemon be
callable from an external API.
Note that the proxy version of the label manager was a source of
issues and hardly used in practice. With the new hooks, users with
more complex requirements can simply plug in their own code to
handle label distribution remotely, so there is no longer a reason
to maintain this code.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
For SRGB, we need to support chunk requests starting at a
specific point in the label space, rather than just asking
for any sufficiently large chunk. To this purpose, we extend
the label manager api to request a chunk with a base value;
if the base is set to 0, the label manager will behave as it
currently does, i.e. fetching the first free chunk big enough
to satisfy the request.
update all the existing calls to get chunks from the label
manager so that they use MPLS_LABEL_BASE_ANY as the base
for the requested chunk
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
when receiving an EAGAIN while trying to read the header
of a ZAPI message, we were erroneously continuing as if
everything was fine, which could crash zebra. Fix this
by returning and letting the re-armed read task deal with
this
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
This fix covers the case where two or more events are processed but only one
becoming effective. E.g. when mixing a synchronous label request from a LDP
deamon and an asynchronous request from a BGP daemon it could happen to the
BGP having the label chunk, but the LDP stuck waiting for the response.
Given e.g.
ldpd <-------->
(sync label request)
Zebra (label proxy) <--> Zebra (shared label manager)
bgpd <-------->
(async label request)
Sequence:
LDP label request ----->
Zebra (label proxy FW) ----> Zebra (LM)
BGP label request ----->
Zebra (label proxy FW) ----> Zebra (LM)
<---- Zebra (LM) RP LDP
<---- Zebra (LM) RP BGP
Signed-off-by: F. Aragon <paco@voltanet.io>
The master thread handler is really part of the zrouter structure.
So let's move it over to that. Eventually zserv.h will only be
used for zapi messages.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This change makes the zebra acting as label manager proxy not to relay non-LM
messages to clients that a zebra acting in non-proxy mode may send to it. Also,
the existing code does not schedule a rcv in case of relay_response_back
returns -1. This patch re-schedules reads on the socket even in case such a
function returns -1 by calling thread_add_read().
Signed-off-by: F. Aragon <paco@voltanet.io>
Corrections so that the BGP daemon can work with the label manager properly
through a label-manager proxy. Details:
- Correction so the BGP daemon behind a proxy label manager gets the range
correctly (-I added to the BGP daemon, to set the daemon instance id)
- For the BGP case, added an asynchronous label manager connect command so
the labels get recycled in case of a BGP daemon reconnection. With this,
BGPd and LDPd would behave similarly.
Signed-off-by: F. Aragon <paco@voltanet.io>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Add centralized thread scheduling dispatchers for client threads and
the main thread
* Rename everything in zserv.c to stop using a combination of:
- zebra_server_*
- zebra_*
- zserv_*
Everything in zserv.c now begins with zserv_*.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The current implementation did not consider multiple clients to
a label-manager acting as proxy, i.e. relaying messages to another
label manager. Specifically, upon a client's request, it checked
the socket & buffer from the actual label manager for pending
responses and directly copìed them to the client --currently--
being served. As a result, if two clients (e.g. ldpd and bgpd)
sent requests, it could happen that responses being 'on the wire'
from the real label manager towards the proxy, where relayed to
the wrong client. This patch, which requires all msgs to include
a a proto & instance pair, lookups up the zserv client that a
message (response) is to be relayed to.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
In a prior refactor, label manager proxy functionality
was broken in two places:
1) in function relay_response_back(), "dst" stream was
accidentally replaced by "src".
2) in zread_relay_label_manager_request(), src was set to point
to a global struct stream *ibuf that was not used/initialized
anywhere.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
* Rename client_connect and client_close hooks to zapi_client_connect
and zapi_client_close
* Remove some more unnecessary headers
* Fix a copy-paste error in zapi_msg.[ch] header comments
* Fix an inclusion comment in zserv.c
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
zserv.c was using hardcoded callbacks to clean up various components
when a client disconnected. Ergo zserv.c had to know about all these
unrelated components that it should not care about. We have hooks now,
let's use the proper thing instead.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit is connecting the table manager with remote daemons by
handling the queries.
As the function is similar in many points with label allocator, a
function has been renamed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Group send and receive functions together, change handlers to take a
message instead of looking at ->ibuf and ->obuf, allow zebra to read
multiple packets off the wire at a time.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Turns out we had 3 different ways to define labels
all of them overlapping with the same meanings.
Consolidate to 1. This one choosen is consistent
naming wise with what the *bsd and linux kernels
use.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The function zserv_create_header was exactly the same
as zclient_create_header. Let's just have one in the
system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow the higher level protocol to specify if it would
like to receive notifications about it's routes that
it has installed.
I've purposely made it part of zclient_new_notify because
we need to track the routes on a per daemon basis only.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This adds "@tcp" as new choice on the -z option present in zebra and the
protocol daemons. The --enable-tcp-zebra option on configure is no
longer needed, both UNIX and TCP socket support is always available.
Note that @tcp should not be used by default (e.g. in an init script),
and --enable-tcp-zebra should never have been in any distro package
builds, because
**** TCP-ZEBRA IS A SECURITY PROBLEM ****
It allows arbitrary local users to mess with the routing table and
inject bogus data -- and also ZAPI is not designed to be robust against
attacks.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
