PR #6416 that solves opsf crash when segment routing is restarted, introduce a
regression in Extended Prefix flooding: when segment routing prefix is modified
or removed, new segment routing prefix is no more flooded. This patch correct
this regression.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add new option to `segment-routing prefix` command to set the
Explcit Null flag in addition to the No-PHP flag. MPLS LFIB configuration
has been also updated to take into account the Explicit Null flag.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
RFC 8665 defines a Segment Routing Local Block for Adjacency SID.
This patch provides the possibility to modify the SRLB as well as
reserved the block range from the Label Manager.
- Introduce new CLI 'segment-routing local-block'
- Add local block to SRDB structure
- Parse / Serialize SRLB in Router Information LSA
- Update OSPF-SR topotest
- Update documentation
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Segment Routing Global Block is now using the Label Manager to reserved
label range. Label Manager connection uses the synchronous mode and dedicated
thread timer is used to establish the connection in safe manner without
blocking OSPFd is the Label Manager is not available.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The SR-TE color YANG leaf is optional so it shouldn't be created
unconditionally (it doesn't have a default value).
Fixes warnings like this when routes are created without specifying
a SR-TE color:
STATIC: libyang: Invalid value "" in "srte-color" element.
(/frr-routing:routing/control-plane-protocols/control-plane-protocol[type='frr-s
taticd:staticd'][name='staticd'][vrf='default']/frr-staticd:staticd/route-list[p
refix='99.0.0.1/32'][afi-safi='frr-routing:ipv4-unicast']/path-list[distance='1'
]/frr-nexthops/nexthop[nh-type='ip4'][vrf='default'][gateway='192.168.1.2'][inte
rface='(null)']/srte-color)
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When turning on `debug zebra packet detail` or `debug zebra packet recv detail`
only display the detailed packet dump when `detail` is added.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
During the prep phase to apply a northbound commit, if no changes were
detected make sure we fill the error message buffer to explain this.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
There are a bunch of places where the table id is not being outputed
in debug messages for routing changes. Add in the table id we
are operating on. This is especially useful for the case where
pbr is working.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Fix a crash where if we issue a show run after a vrf has been
deleted we would crash here due to not null checking.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When iterating over a `show ip bgp vrf all neighbors json` command
bgp is crashing.
The json variable was being double freed. When freeing it, set it
to NULL and then check to make sure it exists before we free.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If you issue this command:
`git config blame.ignoreRevsFile .git-blame-ignore-revs`
Then when you do a git blame XXX, git will ignore the whitespace
changes we made in mass.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In the case of P2P links it is possible to use IP unnumbered which
yields a strong dependency to the interface data for nexthop
resolution in the SPF calculations. While the SPF code strives to
be as independent of non-LSA data as possible there is no way
around here: one has to resolve the nexthop for such a special case
using the interface data.
For this purpose a new flag 'spf_root_node' is introduced to signal
that interface data can be used for P2P links. For now this flag is
always 'true' since the SPF currently always uses the calculating
node as the root node. This will change with the introduction of
TI-LFA where other nodes can be root nodes.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
in OSPF interface data is used for the nexthop resolution
during the SPF algorithm, see RFC2328 16.1.1. However, for
certain technologies like TI-LFA it is desirable to be able
to calculate SPFs for arbitrary root nodes, not just the
calculating node. Since interface data is not available for
other nodes it is necessary to remove this dependency and
make its usage optional, depending on the intent of
changing the RIB with the generated tree (or not).
To signal that a SPF run is used without the intent to
change the RIB an additional flag `spf_dry_run` is
introduced to the ospf_area struct. This flag is currently
only used within the pure SPF code but will be extended
to the SPF postprocessing later on.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
The RFC states:
The BGP Identifier is a 4-octet, unsigned, non-zero integer that
should be unique within an AS. The value of the BGP Identifier
for a BGP speaker is determined on startup and is the same for
every local interface and every BGP peer.
We were going slightly beyond this and ensuring that the address
was a specific range of addresses which is no longer relevant.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Replaced alias for bgp shutdown command with separate regular command
to prevent internal CLI errors.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
While a configuration transaction can't be rejected once it reaches
the APPLY phase, we should allow NB callbacks to generate error
or warning messages when a configuration change is being applied.
That should be useful, for example, to return warnings back to
the user informing that the applied configuration has some kind of
inconsistency or is missing something in order to be effectively
activated. The infrastructure for this was already present, but the
northbound layer was ignoring all errors/warnings generated during
the apply/abort phases instead of returning them to the user. This
commit changes that.
In the gRPC plugin, extend the Commit() RPC adding a new
"error_message" field to the response type. This is necessary to
allow errors/warnings to be returned even when the commit operation
succeeds (since grpc::Status::OK doesn't support error messages
like the other status codes).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
1. Created a structure "isis master".
2. All the changes are related to handle ISIS with different vrf.
3. A new variable added in structure "isis" to store the vrf name.
4. The display commands for isis is changed to support different VRFs.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
Yang files for bgpd to use northbound APIs
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: vishaldhingra <vdhingra@vmware.com>
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Experimental patch to allow us to discuss if we should
allow bfdd to work when v6 is turned off in the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
