LDP would mark all routes as learned on a non-ldp interface. Then
when LDP was configured the labels were not updated correctly. This
commit fixes issues 6841 and 6842.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
stream_forward_getp() cannot be used with negative numbers due to the
size_t argument, we'll end up doing overflow arithmetic.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Signed values get converted to unsigned for addition, so when the value
to adjust a stats variable for hash tables was negative this resulted in
overflow arithmetic, which we generally don't want.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
When not using the transactional CLI mode, do not display a
warning when a YANG-modeled commmand doesn't perform any effective
configuration change.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
1. Added new API for add/delete acl with route map notify.
Co-authored-by: harios <hari@niralnetworks.com>
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
If we have an interface configured in a daemon on shutdown
store the old ifindex value for retrieval on when it is
possibly recreated.
This is especially important for nexthop groups as that we
had at one point in time the ability to restore the
configuration but it was lost when we started deleting
all deleted interfaces. We need the nexthop group subsystem
to also mark that it has configured an interface.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The nexthop_group_write_nexthop_simple function outputs the
interface name, because we've stored the ifindex. The problem
is that there are ephermeal interfaces in linux that can be
destroyed/recreated. Allow us to keep that data and do something
a bit smarter to allow show run's and other show commands to continue
to work when the interface is deleted.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Not everything cares about the vrf and backup info. Break
up the API to add a simple version to just write gateway/interface
info.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Wildcards bits have the opposite representation of a network mask,
example:
192.168.0.0/24 has the following netmask 255.255.0.0 and the wildcard
representation is 0.0.255.255.
To avoid future confusion lets put those definitions into a macro so we
know for sure which form to use.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When removing an IPv4 prefix configuration the wrong amount of bytes
will be read from `struct prefix_ipv4` from `DEFPY`, so lets use the
proper function for this.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When configuring a access list rule with type `any` it is now ambiguous
between cisco and zebra because both have the same syntax, so lets
remove the cisco command to avoid that.
YANG users will not notice this change.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
`nb_cli_enqueue_change` just points to the string values passed in
parameter, so we must use different strings for different function
calls (at least until `nb_cli_apply_changes`).
While here fix a variable name typo/copy paste error on destination host
case.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The restriction was already lift at the YANG model level, now lets
unlock the CLI as well.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When you add a key chain in the RIP configuration file and reload the
configurations via the frr-reload.py script, the script will fail and
the key chain will not appear in the running configuration. The reason
is that frr-reload.py doesn't recognize key as a sub-context.
Before this change, keys were generated this way:
key chain test
key 2
key-string 123
key 3
key-string 456
With this change, keys will be generated this way:
key chain test
key 2
key-string 123
exit
key 3
key-string 456
exit
This will allow frr-reload.py to see the key sub-context and correctly
reload them.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
in ipv6 flowspec, a new type is defined to be able to do filtering rules
based on 20 bits flow label field as depicted in [0]. The change include
the decoding by flowspec, and the addition of a new attribute in policy
routing rule, so that the data is ready to be sent to zebra.
The commit also includes a check on fragment option, since dont fragment
bit does not exist in ipv6, the value should always be set to 0,
otherwise the flowspec rule becomes invalid.
[0] https://tools.ietf.org/html/draft-ietf-idr-flow-spec-v6-09
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
to recognize whether a flowspec prefix has been carried out by
ipv4 flowspec or ipv6 flowspec ( actually, the hypothesis is that only
ipv4 flowspec is supported), then a new attribute should contain the
family value: AF_INET or AF_INET6. That value will be further used in
the BGP flowspec code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
In case of config rollback is enabled,
record northbound transaction based on a control flag.
The actual frr daemons would set the flag to true via
nb_init from frr_init.
This will allow test daemon to bypass recording
transacation to db.
Signed-off-by: Chirag Shah <chirag@nvidia.com>
The sorting for zapi nexthops in zapi routes needs to match
the sorting of nexthops done in zebra. Ensure all zapi_nexthop
attributes are included in the sort.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Sysrepo recently underwent a complete rewrite, where some substantial
architectural changes were made (the most important one being the
extinction of the sysrepod daemon). While most of the existing API
was preserved, quite a few backward-incompatible changes [1] were
introduced (mostly simplifications). This commit adapts our sysrepo
northbound plugin to those API changes in order for it to be compatible
with the latest Sysrepo version.
Additional notes:
* The old Sysrepo version is EOL and not supported anymore.
* The new Sysrepo version requires libyang 1.x.
Closes#6936
[1] https://github.com/sysrepo/sysrepo/blob/devel/CHANGES
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
During the prep phase to apply a northbound commit, if no changes were
detected make sure we fill the error message buffer to explain this.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Fix a crash where if we issue a show run after a vrf has been
deleted we would crash here due to not null checking.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
While a configuration transaction can't be rejected once it reaches
the APPLY phase, we should allow NB callbacks to generate error
or warning messages when a configuration change is being applied.
That should be useful, for example, to return warnings back to
the user informing that the applied configuration has some kind of
inconsistency or is missing something in order to be effectively
activated. The infrastructure for this was already present, but the
northbound layer was ignoring all errors/warnings generated during
the apply/abort phases instead of returning them to the user. This
commit changes that.
In the gRPC plugin, extend the Commit() RPC adding a new
"error_message" field to the response type. This is necessary to
allow errors/warnings to be returned even when the commit operation
succeeds (since grpc::Status::OK doesn't support error messages
like the other status codes).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use `args->errmsg` instead of just `zlog_info` for registering the error
so the users don't need to check their log files.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
We can make the Linux kernel send an ARP/NDP request by adding
a neighbour with the 'NUD_INCOMPLETE' state and the 'NTF_USE' flag.
This commit adds new dataplane operation as well as new zapi message
to allow other daemons send ARP/NDP requests.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
There are situations where POLLERR will be returned. But
since we were not handling it. Thread processing effectively
is turned into an infinite loop, which is bad.
Modify the code so that if we receive a POLLERR we turn it
into a read event to be handled as an error from the handler
function.
This was discovered in pim:
Thread statistics for pimd:
Showing poll FD's for main
--------------------------
Count: 14/1024
0 fd: 9 events: 1 revents: 0 mroute_read
1 fd: 12 events: 1 revents: 0 vty_accept
2 fd: 13 events: 1 revents: 0 vtysh_accept
3 fd: 11 events: 1 revents: 0 zclient_read
4 fd: 15 events: 1 revents: 0 mroute_read
5 fd: 16 events: 1 revents: 0 mroute_read
6 fd: 17 events: 1 revents: 0 pim_sock_read
7 fd: 19 events: 1 revents: 0 pim_sock_read
8 fd: 21 events: 1 revents: 0 pim_igmp_read
9 fd: 22 events: 1 revents: 0 pim_sock_read
10 fd: 23 events: 1 revents: 0 pim_sock_read
11 fd: 20 events: 1 revents: 0 vtysh_read
12 fd: 18 events: 1 revents: 0 pim_sock_read
13 fd: 24 events: 0 revents: 0
strace was showing this line over and over and over:
poll([{fd=9, events=POLLIN}, {fd=12, events=POLLIN}, {fd=13, events=POLLIN}, {fd=11, events=POLLIN}, {fd=15, events=POLLIN}, {fd=16, events=POLLIN}, {fd=17, events=POLLIN}, {fd=19, events=POLLIN}, {fd=21, events=POLLIN}, {fd=22, events=POLLIN}, {fd=23, events=POLLIN}, {fd=20, events=POLLIN}, {fd=18, events=POLLIN}, {fd=6, events=POLLIN}], 14, 20) = 1 ([{fd=21, revents=POLLERR}])
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Somewhere along the way the indentation for comments got
all messed up. Let's make it follow our standards and
also look right too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
