Create the idea of a VRF_UNKNOWN, this is for a vrf where we don't
yet have the vrf_id for it yet.
Refactor the vrf_create code out of existence. We had two code
paths vrf_create and vrf_get. We should use vrf_get to create
the new vrf since XXX_get() creates the data structures now.
Signed-off-by: Donald Sharp
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
ZEBRA_VRF_ACTIVE is a poor name for when a vrf is
actually active. Rename VRF_ACTIVE.
Ticket: CM-10338
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Radhika Mahankali <radhika@cumulusnetworks.com>
It is quite useful to be able to assert whether specific interfaces have
flapped or also to verify that specific interfaces have not flapped.
By having counters for those events and storing the last time of their
occurrence, this is made possible.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Jafar Al-Gharaibeh <jafar@atcorp.com>
When an interface changes which vrf it is part of, it needs to be added
to the list of possible router-id choices in the new vrf and removed
from the old vrf/default.
Ticket: CM-9074
Signed-off-by: Don Slice
Reviewed-by: Vivek Venkatraman
We were incorrectly using vrf instead of zebra_vrf in a
few spots.
Ticket: CM-9412
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Implement VRF change semantics for an interface to be invoked
when an interface is moved from one VRF (e.g., the Default) to
another. This includes the message definition as well as updating,
deleting or adding the interface from clients, depending on their
interest in the VRFs (old and new). Also handle replay of the
addresses on the interface upon VRF change, if required.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Ticket: CM-9527
Reviewed By: CCR-4174
Testing Done: Manual tests of various scenarios
When enabling IPv6 Router Advertisements automatically based on the
presence of IPv6 address on an interface, do it only for relevant
interfaces.
Note: This needs a configure option for completion.
Ticket: CM-9358
Reviewed By: CCR-4116
Testing Done: Manual verification
Ticket: CM-9110
Reviewed By:
Testing Done: Manual testing, see ticket
Aliased "show interface name swpxx" to "show interface name swpxx vrf all" to find the interface regarless of which vrf it resides in.
Convert the rest of zebra over to use a Namespae and VRF.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Back out original null pointer fix targeted it was the wrong fix.
Basically when a ip address is deleted the RA code was waiting till after
the connected pointer was deleted to set the RA appropriately.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
Currently, when RIB processing is initiated (i.e., by calling rib_update()),
all routes are queued for processing. This is not desirable in all situations
because, sometimes the protocol may have an alternate path. In addition,
with NHT tracking nexthops, there are situations when NHT should be kicked
off first and that can trigger subsequent RIB processing.
This patch addresses this by introducing the notion of a trigger event. This
is only for the situation when the entire RIB is walked. The current triggers
- based on when rib_update() is invoked - are "interface change" and "route-
map change". In the former case, only the relevant routes are walked and
scheduled, in the latter case, currently all routes are scheduled for
processing.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7662
Reviewed By: CCR-3905
Note: The initial defect in this area was CM-7420. This was addressed in
2.5.4 with an interim change that only walked static routes upon interface
down. The change was considered a bit risky to do for interface up etc. Also,
this did not address scenarios like CM-7662. The current fix addresses CM-7662.
Some of the changes include:
- ensuring IPv6 addresses are printed correctly
- say 'updating' or 'deleting' etc. only when that is actually done
- say 'queuing' or 'dequeuing' only when that is actually done
- print useful info for 'detailed' debug - that now subsumes 'rib queue'
- delete various useless logs
- VRF-specific - print VRF id in RIB debugs prior to prefix
(e.g., 4:37.1.1.0/28)
Ticket: CM-8110
Reviewed By: CCR-3765
Testing Done: Manual testing (2.5-br)
This Change modifies what zebra thinks is an unnumbered interface.
If the interface is not a loopback and the prefixlength for the
interface is 32 than consider this an unnumbered interface.
Ticket: CM-8016
Reviewed by: CCR-3827
Testing: Full Regression Suites
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The RTADV define was not being set correctly or consistently.
Make the code consistent with our HAVE_IPV6 define.
If the user wants to explicitly turn it off then they should
run --disable-rtadv from the configure cli
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A new member "vrf_id" is added to "struct rib", reflecting the VRF
which it belongs to.
A new parameter "vrf_id" is added to the relative functions where
need, except those:
- which already have the parameter "vrf_id"; or
- which have a parameter in type of "struct rib"; or
- which have a parameter in type of "struct interface".
All incoming routes are set to default VRF.
In fact, all routes in FIB are kept in default VRF. And the logic
is not changed.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
[DL: conflicts fixed + compile warning fix]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/connected.c
zebra/kernel_socket.c
zebra/rib.h
zebra/rt_netlink.c
zebra/zebra_rib.c
zebra/zserv.c
Conflicts:
zebra/connected.c
zebra/interface.c
zebra/kernel_socket.c
zebra/rib.h
zebra/rt_netlink.c
zebra/rtread_getmsg.c
zebra/zebra_rib.c
zebra/zebra_vty.c
zebra/zserv.c
The following commands only show interfaces in the default VRF:
show interface
show interface IFNAME
show interface description
New options are introduced to show interfaces in a specified VRF:
show interface vrf N
show interface IFNAME vrf N
show interface description vrf N
or all VRFs:
show interface vrf all
show interface IFNAME vrf all
show interface description vrf all
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Introduce a new command "interface IFNAME vrf N" to configure an
interface in the non-default VRF.
Till now, only zebra uses this command. Other daemons will install
the command when they support multiple VRFs.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/interface.c
Later, an interface will belong to a specific VRF, and the interface
initialization will be a part of the VRF initialization. So now call
if_init() from vrf_init(), and if_terminate() from vrf_terminate().
Daemons have the according changes:
- if if_init() was called or "iflist" was initialized, now call
vrf_init() instead;
- if if_terminate() was called or "iflist" was destroyed, now call
vrf_terminate() instead.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
bgpd/bgp_main.c
pimd/pim_iface.c
pimd/pim_iface.h
pimd/pim_main.c
pimd/pimd.c
Later, an interface will belong to a specific VRF. Now we add a
property "vrf_id" to the "struct interface", and keep it as the
default value 0.
This property is shown when displaying interfaces information.
It is also added in some logs.
This is just the preparation to move the interace list into the
"struct vrf". The main logic is not changed.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
lib/if.c
zebra/interface.c
Ticket: CM-7420
Reviewed By: Vivek, Donald
Testing Done: UT, verification of the fix + ospf and bgp smoke
On a link delete/down event, schedule only the prefixes which have a
static RIB too.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6812
Reviewed By: Donald
Testing Done:
Double commit of 2119c8fccda5f1497820009c6f1f82eda3c8d0f1 from 2.5br to master
In Quagga, the ptm status is shown as pass for all the interfaces that PTM is not tracking. When ptm is enabled in Quagga all the interfaces are initialized as pass and changed to fail/pass when ptm cable check updates are received. For all the interfaces for which no status was received from PTM remain at pass status. Interface show in quagga indicates wrong status and it should be n/a for all the untracked interfaces. To fix the problem introduced a third state “unknown” and this is default ptm status for all the interfaces. The ptm status is updated accordingly to pass/fail when the updates are received from PTM. Also, reset all interface ptm status to unknown when the connection with ptm is lost and the status gets updated when the connection with PTM is re-established.
Integrates Prescriptive Topology Module(ptm) into quagga.
If this module is enabled, link ups are notified only after the link is verified
as being connected to the neighbor specified. The neighbor specification and
checking is done by the ptm daemon.
<This is a recommit of this patch because it was changed in situ>
This patch also adds BFD multihop support for BGP. Whether a peer is multi-hop or single hop is determined internally. All IGP peers are considered as multi-hop peers. EBGP peers are considered as single hop unless configured as multi-hop.
BGP BFD command enhancement to configure BFD parameters (detect multiplier, min rx and min tx).
router bgp <as-number>
neighbor <name/ip-address> bfd <detect mult> <min rx> <min tx>
Signed-off-by: Radhika Mahankali <radhika@cumulusnetworks.com>
Reviewed-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Kanna Rajagopal <kanna@cumulusnetworks.com>
using IPv6 Router Advertisements (RAs) must be deleted. When an
interface comes up and neighbors are learnt on that interface, the
BGP FSM for any interface peer must be started only if a valid
local address exists; the local address may come up later after IPv6
Duplicate Address Detection.
protocols. BGP and OSPF are integrated to respond this BFD session down message
originated in Zebra via ptmd.
BGP and OSPF now have a bfd command, which tells OSPF/BGP to respond to the
BFD session down message.
OSPF:
interface <>
ip ospf bfd
BGP:
router bgp <>
neighbor <> bfd
Please note that these commands don't enable BFD as a protocol. BFD configuration
and paramter tuning are via BFD applicable UI.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Shrijeet Mukherjee <shm@cumulusnetworks.com>
Integrates Prescriptive Topology Module(ptm) into quagga.
If this module is enabled, link ups are notified only after the link is verified
as being connected to the neighbor specified. The neighbor specification and
checking is done by the ptm daemon.
Quagga sources have inherited a slew of Page Feed (^L, \xC) characters
from ancient history. Among other things, these break patchwork's
XML-RPC API because \xC is not a valid character in XML documents.
Nuke them from high orbit.
Patches can be adapted simply by:
sed -e 's%^L%%' -i filename.patch
(you can type page feeds in some environments with Ctrl-V Ctrl-L)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Linux removes IPv6 addresses when the interface is set down. Those
addresses need to be readded when the interface is set up again.
Also, an interface should not be reactivated from shutdown by configuring
an ip address.
Finally, remove the three-state logic for the shutdown setting as its
sole current use may be mild confusion.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Try to avoid changing connected state from zebra/interface.c as this
means making assumptions about kernel behaviour which may be or may
become wrong. This state should rather be updated by events from the
kernel.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
As there are timeframes when we don't get a notification from the kernel
about new addresses. (e.g. while Linux performs IPv6 DAD), we need to
have some information whether an address has been sent to the kernel or
not.
One case where this is relevant would be a user adding an IPv6 address,
but deleting it before DAD has been complete. With the next patch which
removes some (ill assuming) synchronous parts in address setup,
ipv6_address_uninstall would not know whether or not it has to actually
delete the prefix from the kernel. Resolving these windows where we lack
information is what the flag ZEBRA_IFC_QUEUED is intended for.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
To match the semantics of IPv4, the ZEBRA_IFC_CONFIGURED flag
should be cleared when an IPv6 connected is uninstalled via
vty.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Enhance if_subnet_delete so it will complain about improper use.
Also, fix one occurence of improper use where it was called for
IPv6 as well.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
zebra address bookkeeping is a mess. this is just a workaround to have
IPv4 address deletion somewhat working on Linux.
the if_unset_prefix call is synchronous, when it returns success the
address deletion completed successfully. this is either signaled by a
netlink ACK or by an OK return value from ioctl().
This version is wrapped by #ifdef HAVE_NETLINK so we don't touch the
BSDs for now.
* zebra/interface.c: On Linux, update zebra internal state after
deleting an address.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There was a regression introduced with the previous commit:
"ipv6 nd home-agent-lifetime 1800000" appeared by default in every
interface section of running-config, although this command is
invalid in this context. Troubleshooting and bugfixing of the issue
tracked out several bugs in router advertisement procedures, some of
which are fixed in this commit.
* zebra/interface.c
* if_zebra_new_hook(): update to treat -1 as "uninitialized"
* nd_dump_vty(): idem
* zebra/rtadv.c
* rtadv_send_packet(): update processing of "router lifetime" field,
"home agent" option and "home agent lifetime" field to conform to
RFC6275 better
* ipv6_nd_ra_interval_msec(): update MaxRtrAdvInterval range check,
make sure it never exceeds (initialized) AdvDefaultLifetime
* ipv6_nd_ra_interval(): idem
* ipv6_nd_ra_lifetime(): update AdvDefaultLifetime range check, make
sure it never falls below MaxRtrAdvInterval
* ipv6_nd_homeagent_lifetime(): update HomeAgentLifetime range check
* no_ipv6_nd_ra_lifetime(): update to treat -1 as "uninitialized"
* no_ipv6_nd_homeagent_lifetime(): idem
* rtadv_config_write(): idem
* (general) Move functions in headers into files, to be compiled into
shared object files. Remove inline qualifier from functions. Let the
compiler do the work.
When deleting a VLAN interface after flushing its
addresses, zebra uses 100% CPU time and freezes.
* interface.c: The while loop in line 407 that
should clean up connected routes never hits one
of the 2 lines "last = node;" and thus loops
forever.
Signed-off-by: Roman Hoog Antink <rha@open.ch>
