We are seeing this crash:
New LWP 7673]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `/usr/lib/frr/ospf6d -d -F datacenter -M snmp -A ::1'.
Program terminated with signal SIGABRT, Aborted.
(gdb) bt
vtysh=vtysh@entry=0) at lib/command.c:1288
(gdb)
The command entered is `debug ospf6 lsa inter-router examin`. Code
inspection leads us to the fact that FRR is declaring the data as
const but we are attempting to modify it, causing the crash.
Remvoe the const of this set/get and let things work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The vrrpd one conflicts with the standalone vrrpd package; also we're
installing daemons to /usr/lib/frr on some systems so they're not on
PATH.
Signed-off-by: David Lamparter <equinox@diac24.net>
Some preprocessor constants converted to enums to make the names usable
in the preprocessor.
v2: better isolation between core and vty code to make future northbound
conversion easier.
Signed-off-by: David Lamparter <equinox@diac24.net>
Scenarios where this code change is required:
1. BFD is un-configured from BGP at remote end.
Neighbour BFD sends ADMIN_DOWN state, but BFD on local side will send
DOWN to BGP, resulting in BGP session DOWN.
Removing BFD session administratively shouldn't bring DOWN BGP session
at local or remote.
2. BFD is un-configured from BGP or shutdown locally.
BFD will send state DOWN to BGP resulting in BGP session DOWN.
(This is akin to saying do not use BFD for BGP)
Removing BFD session administratively shouldn't bring DOWN BGP session at
local or remote.
Signed-off-by: Sayed Mohd Saquib sayed.saquib@broadcom.com
the for (ALL_LSDB...) macro was iterating over lsa,
when lsa had just been freed in these functions.
Remove the macro and make the adjustments saving lsa_next
before the free.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If the interface doesn't exist in system, we'll default to broadcast and
then later not change that when the interface comes up. Explicitly
track whether the user configured the type and properly auto-set it if
they didn't.
Fixes: #3930Fixes: #4873
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If the user configured an interface to be in a particular mode, we need
to be consistent about that. No looking at if_is_pointopoint() or
if_is_broadcast().
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
We can't skip reading interface state if there's no area yet, we'll be
missing information later when the interface is configured.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
User pass the string match large-community 1 exact-match from CLI.
Now route map lib has got the string as "1 exact-match". It passes the string
to call back for compilation. BGP will parse this string and came to know
that for "1" it has to do exact match. Routemap lib has to save "1" in it’s
dependency table. Here routemap is saving this as a “1 exact-match”
which is wrong. The solution is used the compiled data.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Conver these functions:
route_map_add_match
route_map_delete_match
route_map_add_set
route_map_delete_set
To return the `enum rmap_compile_rets` and ensure all functions
that use this code handle all the enumerated possible returns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
State1:
If match cmd returns RMAP_MATCH then, keep existing behaviour.
If routemap type is PERMIT, execute set cmds or call cmds if applicable,
otherwise PERMIT!
Else If routemap type is DENY, we DENYMATCH right away
State2:
If match cmd returns RMAP_NOMATCH, continue on to next route-map. If there
are no other rules or if all the rules return RMAP_NOMATCH, return DENYMATCH
We require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Also, this rule should be applicable for routes with VNI label only, and
not for routes without labels. For example, type 3 and type 4 EVPN routes
do not have labels, so, this match cmd should let them through.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
As a result we have a 3rd state:
State3:
If match cmd returned RMAP_NOOP
Then, proceed to other route-map, otherwise if there are no more
rules or if all the rules return RMAP_NOOP, then, return RMAP_PERMITMATCH.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf pointer is used as reference when calling if_get_by_name() function.
this will permit to create interfaces with an unknown vrf_id, since it
is only necessary to get the vrf structure to store the interfaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
Action: Apply route-map match and return the result (RMAP_MATCH/RMAP_NOMATCH)
State1: Receveived RMAP_MATCH
THEN: If Routemap type is PERMIT, execute other rules if applicable,
otherwise we PERMIT!
Else: If Routemap type is DENY, we DENYMATCH right away
State2: Received RMAP_NOMATCH, continue on to next route-map, otherwise,
return DENYMATCH by default if nothing matched.
With reference to PR 4078 (https://github.com/FRRouting/frr/pull/4078),
we require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP (or another enum) to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
Question: Do we repurpose an existing enum RMAP_OKAY or RMAP_ERROR
as the 3rd state (or create a new enum like RMAP_NOOP)?
RMAP_OKAY and RMAP_ERROR are used to return the result of set cmd.
We chose to go with RMAP_NOOP (but open to ideas),
as a way to bypass the rmap filter
As a result we have a 3rd state:
State3: Received RMAP_NOOP
Then, proceed to other route-map, otherwise return RMAP_PERMITMATCH by default.
Signed-off-by:Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
bfd cbit is a value carried out in bfd messages, that permit to keep or
not, the independence between control plane and dataplane. In other
words, while most of the cases plan to flush entries, when bfd goes
down, there are some cases where that bfd event should be ignored. this
is the case with non stop forwarding mechanisms where entries may be
kept. this is the case for BGP, when graceful restart capability is
used. If BFD event down happens, and bgp is in graceful restart mode, it
is wished to ignore the BFD event while waiting for the remote router to
restart.
The changes take into account the following:
- add a config flag across zebra layer so that daemon can set or not the
cbit capability.
- ability for daemons to read the remote bfd capability associated to a bfd
notification.
- in bfdd, according to the value, the cbit value is set
- in bfdd, the received value is retrived and stored in the bfd session
context.
- by default, the local cbit announced to remote is set to 1 while
preservation of the local path is not set.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The route_map_event_hook callback was passing the `route_map_event_t`
to each individual interested party. No-one is ever using this data
so let's cut to the chase a bit and remove the pass through of data.
This is considered ok in that the routemap.c code came this way
originally and after 15+ years no-one is using this functionality.
Nor do I see any `easy` way to do anything useful with this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vrf_id parameter is added to the api of bfd_client_sendmsg().
this permits being registered to bfd from a separate vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
As the previous commit, this replaces ospf6d's pqueue_* usage in SPF
calculations with a DECLARE_SKIPLIST_* skiplist.
Signed-off-by: David Lamparter <equinox@diac24.net>
The ospf6_route_get_first_nh_index function call calls
listhead which returns a (listnode *) but we are casting
it to a (struct ospf6_nexthop *) and away we go.
Fixes: #4142
Found By: Kwind
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The rib process of handling routes has been unified a bit more
and as a result v6 LL routes are now showing up as a result
of a `redistribute connected`. Doing anything with these
routes is a policy decision that should be enforced by the
individual routing daemons not by zebra. As such add a bit
of code to isisd, ripngd and opsf6d to handle them. The bgp daemon
already handles this situation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
there are some events where the list of interfaces per area should be
reviewed due to an interface is being removed. This fix avoids having
some memory leak.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Made changes and updated the routemap applied
counter in the following flows.
1.Increment the routemap applied counter when route map
attached to a redistribution list.
The counter will be updated if the routemap exists.
2.Decrement when route map removed / modified from a
redistribution list.
3.Increment/decrement when route map create/delete
callback triggered.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
- some target_CFLAGS that needed to include AM_CFLAGS didn't do so
- libyang/sysrepo/sqlite3/confd CFLAGS + LIBS weren't used at all
- consistently use $(FOO_CFLAGS) instead of @FOO_CFLAGS@
- 2 dependencies were missing for clippy
Signed-off-by: David Lamparter <equinox@diac24.net>
Avoid a IPv6 multicast group join race by delaying the group install
before processing all event queue.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When using the timer to set the socket multicast options, keep track
of the thread pointer. If we lose the thread reference we might have
situations where multicast is enabled when it should be disabled and
vice versa.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Some daemons like ospfd and isisd have the ability to advertise a
default route to their peers only if one exists in the RIB. This
is what the "default-information originate" commands do when used
without the "always" parameter.
For that to work, these daemons use the ZEBRA_REDISTRIBUTE_DEFAULT_ADD
message to request default route information to zebra. The problem
is that this message didn't have an AFI parameter, so a default route
from any address-family would satisfy the requests from both daemons
(e.g. ::/0 would trigger ospfd to advertise a default route to its
peers, and 0.0.0.0/0 would trigger isisd to advertise a default route
to its IPv6 peers).
Fix this by adding an AFI parameter to the
ZEBRA_REDISTRIBUTE_DEFAULT_{ADD,DELETE} messages and making the
corresponding code changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
cf. https://wiki.debian.org/NonFreeIETFDocuments
These MIBs were in our git purely for documentation purposes, they are
not installed and not needed for building SNMP support.
Signed-off-by: David Lamparter <equinox@diac24.net>
ABR summary should contain best intra prefix LSA.
There might be a case where intra-prefix route with different
cost from different advertising router present, summary
advertisement should only consider best intra-prefix route.
A route which is marked for remove, while purging the route's
ABR summary LSA also remove summary route from the summary
table.
Ticket:CM-22665
Testing Done:
Validate on ABR topology, intra-prefix route with
different cost, a higher cost intra-prefix route skip from sending
ABR summary LSA.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
it was not possible to configure per area identifier under decimal
format some ospf6 area options. this is the case of filter list, or
export-list.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The frr-interface YANG module models interfaces using a YANG list keyed
by the interface name and the interface VRF. Interfaces can't be keyed
only by their name since interface names might not be globally unique
when the netns VRF backend is in use. When using the VRF-Lite backend,
however, interface names *must* be globally unique. In this case, we need
to validate the uniqueness of interface names inside the appropriate
northbound callback since this constraint can't be expressed in the
YANG language. We must also ensure that only inactive interfaces can be
removed, among other things we need to validate in the northbound layer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce frr-interface.yang, which defines a model for managing FRR
interfaces.
Update the 'frr_yang_module_info' array of all daemons that will
implement this module.
Add automatically generated stub callbacks in if.c. These callbacks will
be implemented in the following commit.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR_DAEMON_INFO should now contain an array of 'frr_yang_module_info'
structures describing the YANG modules implemented by the daemon.
This array will be used by frr_init() function to load all YANG modules
and initialize the northbound callbacks during the daemon initialization.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We had a variety of issues with sorted list compare functions.
This commit identifies and fixes these issues.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use ospf6_prefix_same for comparing two exact same prefix
to determine ECMP for a route.
ospf6_route_cmp expects two different prefix rather
being exactly same.
Ticket:CM-22630
Testing Done:
performed ECMP of intra network prefix route via
sending same route via different available
ospf6 paths.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The dead code has been disabled with '#if 0', in a similar way to other
disabled logs in the same function.
Signed-off-by: F. Aragon <paco@voltanet.io>
Issue: # https://github.com/FRRouting/frr/issues/1836
Issue 1: if the router ospf current configuration is "area 0.0.0.2
range 1.0.0.0/24 cost 23" and user try to configure "area 0.0.0.2
range 1.0.0.0/24 not-advertise", the existing o/p is "area 0.0.0.2
range 1.0.0.0/24 cost 23 not-advertise". The keywords "not-advertise"
& "cost" are multually exclusive, so they should not come together.
The vice versa way configuration is working fine.
Fix: When ospf area range "not-advertise", the cost should be initialized
to OSPF_AREA_RANGE_COST_UNSPEC.
Issue 2: if the router ospf current configuration "area 0.0.0.2 range
1.0.0.0/24 substitute 2.0.0.0/24" and user try to configure "area 0.0.0.2
range 1.0.0.0/24 not-advertise" the existing o/p is "area 0.0.0.2 range
1.0.0.0/24 not-advertise substitute 2.0.0.0/24". The keywords
"not-advertise" & "substiture" are multually exclusive, so they should
not come together. The vice versa way configuration is working fine.
Fix: When ospf area range "not-advertise" is configured,
ospf_area_range_substitute_unset() should be get called.
Issue 3: if the router ospf6 current configuration is "area 0.0.0.2
range 2001::/64 cost 23" and user try to configure "area 0.0.0.2 range
2001::/64 advertise", the existing o/p is area 0.0.0.2 range 2001::/64.
The keyword "cost 23" disappears.
Fix: When ospf area range "advertise" is configured and the range is not
NULL, the cost should not be modified.
Signed-off-by: Sarita Patra <saritap@vmware.com>
This serves no other purpose than to generate stupid warnings for
overwritten initializers on old gcc versions.
Signed-off-by: David Lamparter <equinox@diac24.net>
Since we're now building through one large Makefile, we can easily put
things with their daemons and crossreference nicely.
Signed-off-by: David Lamparter <equinox@diac24.net>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Coverity warns about a possible double free; add an assert to make sure
we never hit it, and hopefully silence Coverity.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The correction in commit 7edb6aa (PR #2502) was wrong, as it is was not
taking in consideration the unlock counter. Thanks to @eqvinox for noticing
it.
Signed-off-by: F. Aragon <paco@voltanet.io>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't show BFD commands with timers since it might confuse users
("show running-config" won't display timers in client daemons anymore),
but keep accepting this command from previous configurations.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When BFD timers are configured, don't show it anymore in the daemon
side. This will help us migrate the timers command from daemons to
`bfdd`.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When calling route_map_finish, every place that we do we must
first set the deletion event to NULL, or we will create an infinite
loop, if we are using the delayed route-map application code.
As such we might as well just make the route_map_finish code
do this work, as that there is really no viable alternative here
and route_map_finish should only be called on shutdown.
This fixes an infinite loop in zebra on shutdown when there
are route-maps.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It should have the same behavior when debug not enabled, and slightly
different behavior when debug enabled (previously dead code now should
show debug messages in debug mode)
Signed-off-by: F. Aragon <paco@voltanet.io>
Previous fix was incomplete, as calling ospf6_lsa_unlock() frees 'req' but
it does not put it to zero, so it was called ospf6_lsdb_remove() afterwards
even being 'req' already freed.
Signed-off-by: F. Aragon <paco@voltanet.io>
With a new version of clang 6.0, the compiler is detecting more
issues where we may be possibly be truncating the output string.
Fix by increasing the size of the output string to make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Programs that link to libnetsnmp must be compiled using a special set
of flags as specified by the "net-snmp-config --base-cflags" command
(whose output is stored in the SNMP_CFLAGS variable). The problem is
that "net-snmp-config --base-cflags" can output -std=c99 in addition to
other compiler flags in some platforms, and this breaks the build since
FRR souce code makes use of some GNU compiler extensions (e.g. allow
trailing commas in function parameter lists). In order to solve this
problem, append -std=gnu99 after SNMP_CFLAGS in all makefiles where this
variable is used. This way the -std=c99 flag will be overwritten when it's
present. Source files that don't link to libnetsnmp will be compiled using
either -std=gnu99 or -std=gnu11 depending on the compiler availability.
Fixes#1617.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Inter Area Prefix LSA ECMP is not working properly.
Two ABRs advertising IAP routes to backbone, not installed
with correct cost or if ABR restarted the route is removed
from backbone.
The current implementation ABR was not suppressing IAP update
for prefix cost is not better or route is not installed.
The better cost or path route was overwritten with non optimal
cost. This caused a loop with nexthops pointing each other
at backbone and non-backbone routers.
Consider to only send BEST/installed route's IAP notification
at ABRs.
When receiving IAP update from multiple ABRs, preserve multiple
advertising routers under the prefix route node.
Upon LSA maxage only remove the advertising route's which is
impacted and update route's nexthops and update FIB.
Testing Done:
Top to Bottom is part of area 0 on the Right, and
from Left side in area 1.
Top and Bottom act as ABRs.
H1 route is sent as Inter-Area Prefix to Right.
Trigger multiple triggers for ABR routes.
1) Shutting down link between, top to right to eliminate nhs
2) Restart frr at Top.
3) Restart frr at Right.
+-----------+
. |
,'| Top |`.
/ . | \
,' ,'+.----------+`. `.
/ / ` `. \ ',
,' ,' ,' \ `. .
- / ` `. ', `,
,` ,` ,' \ \ \
' - ` `. `, `,
+--------+ +--`--`--`--+ +---'---'--'+ +--------+
| | | | | | | |
| H1 ------ Left | | Right ------ H2 |
| | | | | | | |
+--------+ +-----------+ +----.--,-,-+ +--------+
`. ` \ - / /
\ `. ` ,' .` `
' . \ / / '
`. \ `. ` / ,'
\ ` . ,` / /
`. `. . / / /
\ . \ ,' ' /
' '--'--------+,'.`
`.| - /
' mid1 |/
| -
+-----------+
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Use brouter table to fetch nexthops for
asbr prefix (external) routes.
Change adv. router of the router's path once
the DB/FIB is updated with effective nexthops.
Cleanup of nexthop update when route's adv
router changes cost.
Ticket:CM-16139
Testing Done:
Tested ASBR external routes in CLOS topology with
multiple paths asbr originator at tor to spine.
Validated external route's nexthop within
area and inter area.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
During Intra brouter calculation, brouters will be
marked for remove. if one of the brouter is removed,
as part of its remove callback, ospf6_abr_examin_summary
is performed where marked for brouter would be removed.
Since refcount of next brouter node still higher, it will
retain one node with dangled next brouter pointer.
When intra brouter calculation iteration goes to next node,
where accessing free node causes a crash.
Ticket:CM-20807
Testing Done:
Configure multilple ABR routers between area 0 and area x, y.
Remove ospf6 configuration on area x, y abrs and check area 0
Intra brouter calculations.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Avoid duplicate ABR brouter entry and
its nexthops.
The route lookup results in first element of the
route/redix node. In case of Intra and inter area
brouter, the first element always intra brouter.
the first element comparison results in always addition
of new element for inter area brouter in brouter table.
Now, iterate all elements of the route node and compare
for brouter origin, if it is same simply update its
nexthops to FIB.
brouter and brouter route nexthops should be merge to avoid
duplicate nexthops for the inter area routes.
Ticket:CM-20807
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When there are multiple advertisers/paths to reach
Intra-Prefix route, if any path is removed,
re-added back, it does add to the same route node.
ospf6 intra prefix, first stored in oa->route_table
then as part of add cb, it would add to ospf6->route_table
which adds to FIB.
When copying a route with its paths & NHs from oa->table to
ospf6->table the path origin should not be modified otherwise
ospf6->table would not find existing node rather it appends
new node.
Use spf_table to fetch nexthops for a given advertisers/path,
to form effective nexthop list for a route.
Ticket:CM-16139
Testing Done:
R2 ---- R3
| |
R1 ---- R4
Inject Intra Ara Prefix LSA from R1 & R3, validate R2 and R4
having two origination point/paths to reach for a route.
Trigger link flap, frr restart or remove/readd R3's INP one of the
injection point.
Remove link between R4 to R1 and validate R3 carrying single
path to reach prefix.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Durig ospf6 instance cleanup all border routers
are removed from the db then external LSAs removal
from DB is triggered. During the time, external route
path would not be valid as brouters along with its
rechability have vanished.
For a given external route removal check if no more
paths available simple remove the route from route db.
Ticket:CM-20669
Testing Done:
Bring up ASBR configuration with ECMP paths to a route.
Bring down the ospf6 instance and validate route is removed
from the DB.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When neighbor state transition from LOADING to
FULL state, active full neighbors count incremented.
The full neighbors count is used for router-id change
if any full neighbor exist, displays message to restart
ospf6/frr to activate new router-id.
In the case of P-t-P neighbor type neighbor transition
from EXCHANGE to FULL which missed full neighbors count.
Ticket:CM-20574
Testing Done:
Initially, Bring up zebra assigned router-id in ospf6
with point-to-point link based neighbor.
Configure static router-id where restart of ospf6 message
is displayed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Handle ECMP for Intra Area Prefix LSAs routes.
Ticket:CM-16139
Testing Done:
Configure ospf6 passive interface R2 and R3 with
same prefix address.
Check Intra Area Prefix LSA update at R1 and R3
which would have ECMP paths with effective two
paths and two nexthops (from R2 and R4).
stop frr at R3 and R1 and R4 route changes back to
one nexthop and one paht.
R1 ---- R2
| |
R3 ---- R4
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
When two routers from same area connected to backbone,
intra route advertised from area x should take precedence
within area x. The same route would be injected as summary
lsa to area 0/y. The same LSA via second abr injected back to
area x and since area 0 is lower than area x its route take
precedence.
Move the area check below path type and cost as both are crucial
to determine best route.
Ticket:CM-19627
Testing Done:
Initial route generated via area 1 as Intra-Prefix LSA (2009).
R1 and R2 both re advertised Inter Area Prefix LSA
(Summary LSA 2003) to area 1.
With the change area 1 Intra route precedence is preserved.
The address of H1 from Right is reachable via ping.
area 1 | area 0
R1
/ \
/ \
/ \
H1 --Left Right
\ /
\ /
\ /
R2
area 1 | area 0
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
During Intra area border router calculation, all
border routers are marked for remove from brouter table.
Once SPF calculation is done, retain inter area
border router if the adv. intra border router (abr)
is present in SPF table.
Ticket:CM-20171
Testing Done:
Validated inter area ASBR (L1) is retained at
R1 and R2 post intra border router calculation.
L1 -- (area 1)-- L2 -- (area 0) -- R1 --- R2
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
