This commit makes bgpd to support VPNv4's extended
nexthop capability for bgp-capability negotiation
when BGP open messaging.
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
The linux kernel is adding support for seg6/seg6local
lwtunnel type to support SRv6 feature.
This commit update our includes to reflect new types
and structs we should be listening for from the kernel
Signed-off-by: Hiroki Shirokura <slank.dev@gmail.com>
Update zclient_lookup_nexthop_once() to create the zapi
header using the vrf_id on the pim->vrf struct.
This is the one we do a check on a couple lines before, so
we should be using it when we actually create the header as
well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Allow pimd to stop the lookup if zebra tells pimd that the
lookup failed due to a zapi error. Otherwise, it will keep
waiting for a nexthop message that will never come.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add error handling for top level failures (not able to
execute command, unable to find vrf for command, etc.)
With this error handling we add a new zapi message type
of ZEBRA_ERROR used when we are unable to properly handle
a zapi command and pass it down into the lower level code.
In the event of this, we reply with a message of type
enum zebra_error_types containing the error type.
The sent packet will look like so:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Length | Marker | Version |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| VRF ID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Command |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ERROR TYPE |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Also add appropriate hooks for clients to subscribe to for
handling these types of errors.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
There's confusion between the nexthop-group configuration and a
zebra-specific show command. For now, make the zebra show
command string RIB-specific until we're able to unify these
paths.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
uint8_t * cannot be cast to uint32_t * unless the
pointed-to address is aligned according to uint32_t's
alignment rules. And it usually is not.
Signed-off-by: Santosh P K <sapk@vmware.com>
The FRR community keeps getting asked about what is supported or not.
Try to clarify in an additional spot what is and what is not supported.
Where people interested in using PIM might have a chance at actually
seeing the notification.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
With this change, we are able to set attributes via route-map to the default
route. It's useful in cases where we have two or more spines and we want to
prefer one router over others for leaves. This simplifies configuration instead
of using 'network 0.0.0.0/0' or 'ip route 0.0.0.0/0 ...' and 'redistribute
static' combination.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
=================================================================
==3058==ERROR: AddressSanitizer: SEGV on unknown address 0x000000000010 (pc 0x7f5bf3ef7477 bp 0x7ffdfaa20d40 sp 0x7ffdfaa204c8 T0)
==3058==The signal is caused by a READ memory access.
==3058==Hint: address points to the zero page.
#0 0x7f5bf3ef7476 in memcpy /build/glibc-OTsEL5/glibc-2.27/string/../sysdeps/x86_64/multiarch/memmove-vec-unaligned-erms.S:134
#1 0x4d158a in __asan_memcpy (/usr/lib/frr/zebra+0x4d158a)
#2 0x7f5bf58da8ad in stream_put /home/qlyoung/frr/lib/stream.c:605:3
#3 0x67d428 in zsend_ipset_entry_notify_owner /home/qlyoung/frr/zebra/zapi_msg.c:851:2
#4 0x5c70b3 in zebra_pbr_add_ipset_entry /home/qlyoung/frr/zebra/zebra_pbr.c
#5 0x68e1bb in zread_ipset_entry /home/qlyoung/frr/zebra/zapi_msg.c:2465:4
#6 0x68f958 in zserv_handle_commands /home/qlyoung/frr/zebra/zapi_msg.c:2611:3
#7 0x55666d in main /home/qlyoung/frr/zebra/main.c:309:2
#8 0x7f5bf3e5db96 in __libc_start_main /build/glibc-OTsEL5/glibc-2.27/csu/../csu/libc-start.c:310
#9 0x4311d9 in _start (/usr/lib/frr/zebra+0x4311d9)
the ipset->backpointer was NULL as that the hash lookup failed to find
anything. Prevent this crash from happening.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The decoding of _add and _del functions is practically identical
do a bit of work and make them so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
=================================================================
==13611==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7ffe9e5c8694 at pc 0x0000004d18ac bp 0x7ffe9e5c8330 sp 0x7ffe9e5c7ae0
WRITE of size 17 at 0x7ffe9e5c8694 thread T0
#0 0x4d18ab in __asan_memcpy (/usr/lib/frr/zebra+0x4d18ab)
#1 0x7f16f04bd97f in stream_get2 /home/qlyoung/frr/lib/stream.c:277:2
#2 0x6410ec in zebra_vxlan_remote_macip_del /home/qlyoung/frr/zebra/zebra_vxlan.c:7718:4
#3 0x68fa98 in zserv_handle_commands /home/qlyoung/frr/zebra/zapi_msg.c:2611:3
#4 0x556add in main /home/qlyoung/frr/zebra/main.c:309:2
#5 0x7f16eea3bb96 in __libc_start_main /build/glibc-OTsEL5/glibc-2.27/csu/../csu/libc-start.c:310
#6 0x431249 in _start (/usr/lib/frr/zebra+0x431249)
This decode is the result of a buffer overflow because we are
not checking ipa_len.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
uint8_t * cannot be cast to uint32_t * unless the pointed-to address is
aligned according to uint32_t's alignment rules. And it usually is not.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
advertise pip running configuration should
display ip followed by mac parameters value as defined
in cli signature.
advertise-pip is enabled by default, when displaying the
running configuration, there is '\n' added after
ip and mac parameters which was not guarded around
the non-default parameters.
Currently, for every bgp vrf instance it ends up
displaying l2vpn address-family section due to
unguarded newline.
running config:
router bgp 6004 vrf vrf1
!
address-family l2vpn evpn
exit-address-family
!
Ticket:CM-26964
Testing Done:
With fix when only 'router bgp 6004 vrf vrf1' configured,
running config looks like:
!
router bgp 6004 vrf vrf1
!
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
If someone provides us more nexthops than our configured multipath
setting, drop the rest of them
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
