1. Modified scripts to optimize execution time for route-map test suite
2. Removed unnecessary print statements from /lib/bgp.py
Signed-off-by: Kuldeep Kashyap <kashyapk@vmware.com>
Reduce rip topo1 run time from ~100 seconds down to ~45 seconds.
1) Reduce very very long sleeps
2) Modify rip timers to be more aggressive in sending data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_multiview_topo1 test had two issues
a) An abbundance of sleeps that are not necessary
b) The convergence time was too short.
The upshoot of this is that the test goes from 72 -> 33 seconds
run time on my machine.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
annie# show bgp ipv4 uni summ
BGP router identifier 192.168.201.136, local AS number 64539 vrf-id 0
BGP table version 22458946
RIB entries 1458006, using 178 MiB of memory
Peers 4, using 68 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd
45.33.5.119 4 0 0 0 0 0 0 never Active
65.19.134.122 4 15096 4611832 108292 0 0 0 6d22h55m 800670
107.13.46.23 4 0 0 0 0 0 0 never Connect
robot(192.168.201.139) 4 64540 11159975 11365599 0 0 0 05w2d05h Connect
Total number of neighbors 4
On very busy systems The column output for MsgRcvd and MsgSent can quickly move past 7 columns.
Add a couple more to allow for even display.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a basic setup and test of evpn-pim.
Create a vxlan device ensure that pim notices this
and setups the appropriate groups and sends them
to the RP.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Install some kernel routes with different admin distances
ensuring that they are installed correctly and characterized
properly in the rib.
Then add a static route to override the kernel and then remove
it again to ensure that we account for it properly still.
Signed-off-by: Donald Sharp <sharpd@cumulusnetorks.com>
Recent commit: 0eb97b860d
Broke onlink behavior and as a result ospf unnumbered failed
to work. This commit adds a small test to create 2 ospf routers,
connect them through ospf unlinked behavior and then ensure
that the routes are installed into the kernel as expected.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add an additional router to the basic pim tests.
1) This test will add a link between r1 and a new rp
2) This test will ensure that r1 and rp have the expected
who is the rp.
3) This test will ensure that the rp has received the upstream
data for the multicast stream that is started.
Ostensibly commit
68a02e06e5 is the first bad commit
commit 68a02e06e5
Author: Mark Stapp <mjs@voltanet.io>
Date: Wed Nov 13 16:06:06 2019 -0500
*: revise zapi nexthop encoding
Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Sparked this commit in that it broke nexthop reporting to upper
level protocols. Ensure that this expectation stays working
in the future.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a very basic nexthop group functionality test.
This test creates a 2-way ecmp group and installs a route
with it using sharpd. Then we check to see that the nexthop
groups are marked valid/installed in zebra.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Fix the ospf6-topo1 test to understand nhg's and what happens
when they are installed into a kernel that can support them.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The final test case of this topotest wasn't really testing
anything. Do the following changes to fix this:
* Remove "no link-detect" from the zebra configs so that link down
failures are detected immediately;
* After shutting down the interface between r1 and r2, wait five
seconds before testing if the pseudowires reconverged through
the r3 router.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is necessary to make some tests work correctly. Only topologies
created using the topogen framework benefit from this change.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Instead of installing libyang from some old build, let's install
the current libyang from our Debian/Ubuntu repository.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
A few topotests were failing since they were not aware
of shared nexthops and, therefore, matching on flags that
could be changed when another route sharing that nexthop is
installed.
Update routes that are not installed to not match their json output
on the nexthop flag information. The ones that are installed will
still retain their matches though since they can be sure the nexthop
should have those flags (they would be the route that set them).
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Signed-off-by: Ashish Pant <ashish12pant@gmail.com>
Add cli error returned for invalid bgp-community-list command
Fix retry function to avoid retries when expected is False
