```
ton# sh ip bgp peer-group
BGP peer-group pg-a
Peer-group type is auto
Configured address-families: IPv4 Unicast;
BGP peer-group pg-e, remote AS 0
Peer-group type is external
Configured address-families: IPv4 Unicast;
BGP peer-group pg-i, remote AS 65001
Peer-group type is internal
Configured address-families: IPv4 Unicast;
ton#
```
`auto` should be handled accordingly.
Fixes: 0dfe25697f ("bgpd: Implement neighbor X remote-as auto")
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
In the near future, some daemons may only register SIDs. This may be
the case for the pathd daemon when creating SRv6 binding SIDs.
When a locator is getting deleted at ZEBRA level, the daemon may have
an easy way to find out the SIds to unregister to.
This commit proposes to add the locator name to the SID_SRV6_NOTIFY
message whenever possible. Only case when an allocation failure happens,
the locator will not be present. In all other places, the notify API
at procol levels has the locator name extra-parameter.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Zebra sends a `SRV6_SID_NOTIFY` notification to inform clients about the
result of a SID alloc/release operation. This commit adds a handler to
process a `SRV6_SID_NOTIFY` notification received from zebra.
If the notification indicates that a SID allocation operation was
successful, then it stores the allocated SID in the SRv6 database,
installs the SID into the RIB, and advertises the SID to the other BGP
routers.
If the notification indicates that an operation has failed, it logs the
error.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Make the `sid_register()` function non-static to allow other BGP modules
(e.g. bgp_zebra.c) to register SIDs.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Currently, BGP allocates SIDs without interacting with Zebra.
Recently, the SRv6 implementation has been improved. Now, the daemons
need to interact with Zebra through ZAPI to obtain and release SIDs.
This commit extends BGP to request SIDs from Zebra instead of allocating
the SIDs on its own.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
When SRv6 VPN is unconfigured in BGP, BGP needs to interact with SID Manager to
release the SID and make it available to other daemons
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
This commit extends BGP to process locator information received from
SRv6 Manager (zebra) and save the locator info in the SRv6 database.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Currently, when SRv6 is enabled in BGP, BGP requests a locator chunk
from Zebra. Zebra assigns a locator chunk to BGP, and then BGP can
allocate SIDs from the locator chunk.
Recently, the implementation of SRv6 in Zebra has been improved, and a
new API has been introduced for obtaining/releasing the SIDs.
Now, the daemons no longer need to request a chunk.
Instead, the daemons interact with Zebra to obtain information about the
locator and subsequently to allocate/release the SIDs.
This commit extends BGP to use the new SRv6 API. In particular, it
removes the chunk throughout the BGP code and modifies BGP to
request/save/advertise the locator instead of the chunk.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
Add an API to request information from the SRv6 SID Manager (zebra)
regarding a specific SRv6 locator.
Signed-off-by: Carmine Scarpitta <cscarpit@cisco.com>
The "if_is_vrf" check is unnecessary because it’s already handled by
"if_get_vrf_loopback". Additionally, it ignores the default loopback and
could introduce potential bugs.
Fixes: 8b81f32e97 ("bgpd: fix label lost when vrf loopback comes back")
Signed-off-by: Loïc Sang <loic.sang@6wind.com>
Ticket: #4060069
show bgp vrf afi unicast statistics json output is not return in json
format for non exists vrf.
Fix:
Json output is formatted for non exists vrf cases.
Command supported:
```
show bgp vrf <VRFNAME> ipv4/ipv6 unicast statistics json
show bgp vrf <VRFNAME> l2vpn evpn statistics json
```
Before Fix:
```
leaf11#
leaf11# show bgp vrf test ipv4 unicast statistics json
View/Vrf test is unknown
leaf11#
leaf11#
leaf11# show bgp vrf test ipv6 unicast statistics json
View/Vrf test is unknown
leaf11#
leaf11#
leaf11# show bgp vrf default1 l2vpn evpn statistics json
View/Vrf default1 is unknown
leaf11#
```
After Fix:
```
leaf11#
leaf11# show bgp vrf test ipv4 unicast statistics json
{
"warning":"View/Vrf is unknown"
}
leaf11#
leaf11#
leaf11# show bgp vrf test ipv6 unicast statistics json
{
"warning":"View/Vrf is unknown"
}
leaf11#
leaf11# show bgp vrf default1 l2vpn evpn statistics json
{
"warning":"View/Vrf is unknown"
}
leaf11#
```
Ticket: #4060069
Signed-off-by: Sindhu Parvathi Gopinathan's <sgopinathan@nvidia.com>
When trying to track down a MTYPE_TMP memory leak
it's harder to search for it when you happen to
have some usage of ttable_dump. Let's just give
it it's own memory type so that we can avoid
confusion in the future.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
evpn has a concept of `local` tables where the evpn routes
are actually converted into underlying routes/neighbor
table entries( or vice versa ). Then this local route
is propagated to the global evpn l2vpn table and sent
to the peers. Certain show commands in evpn look
operate on the local table but make the output look
like the data has not been sent to the peer. This
is confusing for the operator. Modify the code
such that local tables get a `Local BGP table not advertised`
in the place where the code talks about whom has received
the data or not.
Example:
torm11# show bgp l2vpn evpn route vni 1000 mac 8a:a1:cc:73:a3:ac ip 45.0.0.5
BGP routing table entry for [2]:[0]:[48]:[8a:a1:cc:73:a3:ac]:[32]:[45.0.0.5]
Paths: (2 available, best #2)
Local BGP table not advertised
Route [2]:[0]:[48]:[8a:a1:cc:73:a3:ac]:[32]:[45.0.0.5] VNI 1000
Imported from 192.168.100.18:2:[2]:[0]:[48]:[8a:a1:cc:73:a3:ac]:[32]:[45.0.0.5], VNI 1000
65101 65005
192.168.100.18(leaf2) from leaf2(192.168.5.1) (192.168.100.14)
Origin IGP, valid, external
Extended Community: RT:65005:1000 ET:8
Last update: Thu Mar 21 14:29:04 2024
Route [2]:[0]:[48]:[8a:a1:cc:73:a3:ac]:[32]:[45.0.0.5] VNI 1000
Imported from 192.168.100.18:2:[2]:[0]:[48]:[8a:a1:cc:73:a3:ac]:[32]:[45.0.0.5], VNI 1000
65101 65005
192.168.100.18(leaf1) from leaf1(192.168.1.1) (192.168.100.13)
Origin IGP, valid, external, bestpath-from-AS 65101, best (Router ID)
Extended Community: RT:65005:1000 ET:8
Last update: Thu Mar 21 14:29:04 2024
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Fix static-analyser warnings with BGP labels:
> $ scan-build make -j12
> bgpd/bgp_updgrp_packet.c:819:10: warning: Access to field 'extra' results in a dereference of a null pointer (loaded from variable 'path') [core.NullDereference]
> ? &path->extra->labels->label[0]
> ^~~~~~~~~
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When parsing EVPN NLRIs, and an error occurred, do no forget to free the memory.
Fixes: 4ace11d010 ("bgpd: Move evpn_overlay to a pointer")
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When 'no rpki' is requested and the rtrlib RPKI object was freed, bgpd
is crashing.
RPKI is configured in VRF red.
> ip l set red down
> ip l del red
> printf 'conf\n vrf red\n no rpki' | vtysh
> Core was generated by `/usr/bin/bgpd -A 127.0.0.1 -M snmp -M rpki -M bmp'.
> Program terminated with signal SIGSEGV, Segmentation fault.
> #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:44
> 44 ./nptl/pthread_kill.c: No such file or directory.
> [Current thread is 1 (Thread 0x7fb401f419c0 (LWP 190226))]
> (gdb) bt
> #0 __pthread_kill_implementation (no_tid=0, signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:44
> #1 __pthread_kill_internal (signo=11, threadid=140411103615424) at ./nptl/pthread_kill.c:78
> #2 __GI___pthread_kill (threadid=140411103615424, signo=signo@entry=11) at ./nptl/pthread_kill.c:89
> #3 0x00007fb4021ad476 in __GI_raise (sig=11) at ../sysdeps/posix/raise.c:26
> #4 0x00007fb4025ce22b in core_handler (signo=11, siginfo=0x7fff831b2d70, context=0x7fff831b2c40) at lib/sigevent.c:248
> #5 <signal handler called>
> #6 rtr_mgr_remove_group (config=0x55fe8789f750, preference=11) at /build/make-pkg/output/source/DIST_RTRLIB/rtrlib/rtrlib/rtr_mgr.c:607
> #7 0x00007fb40145f518 in rpki_delete_all_cache_nodes (rpki_vrf=0x55fe8789f4f0) at bgpd/bgp_rpki.c:442
> #8 0x00007fb401463098 in no_rpki_magic (self=0x7fb40146bba0 <no_rpki_cmd>, vty=0x55fe877f5130, argc=2, argv=0x55fe877fccd0) at bgpd/bgp_rpki.c:1732
> #9 0x00007fb40145c09a in no_rpki (self=0x7fb40146bba0 <no_rpki_cmd>, vty=0x55fe877f5130, argc=2, argv=0x55fe877fccd0) at ./bgpd/bgp_rpki_clippy.c:37
> #10 0x00007fb402527abc in cmd_execute_command_real (vline=0x55fe877fd150, vty=0x55fe877f5130, cmd=0x0, up_level=0) at lib/command.c:984
> #11 0x00007fb402527c35 in cmd_execute_command (vline=0x55fe877fd150, vty=0x55fe877f5130, cmd=0x0, vtysh=0) at lib/command.c:1043
> #12 0x00007fb4025281e5 in cmd_execute (vty=0x55fe877f5130, cmd=0x55fe877fb8c0 "no rpki\n", matched=0x0, vtysh=0) at lib/command.c:1209
> #13 0x00007fb4025f0aed in vty_command (vty=0x55fe877f5130, buf=0x55fe877fb8c0 "no rpki\n") at lib/vty.c:615
> #14 0x00007fb4025f2a11 in vty_execute (vty=0x55fe877f5130) at lib/vty.c:1378
> #15 0x00007fb4025f513d in vtysh_read (thread=0x7fff831b5fa0) at lib/vty.c:2373
> #16 0x00007fb4025e9611 in event_call (thread=0x7fff831b5fa0) at lib/event.c:2011
> #17 0x00007fb402566976 in frr_run (master=0x55fe871a14a0) at lib/libfrr.c:1212
> #18 0x000055fe857829fa in main (argc=9, argv=0x7fff831b6218) at bgpd/bgp_main.c:549
Fixes: 8156765abe ("bgpd: Add `no rpki` command")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
