Add some Coccinelle semantic patches we can use to automatically
refactor code in the future.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Discovered in testing that if a static route in the default table
was entered immediately after a vrf static block, the static route
intended for the default table was put in the vrf instead. This
fix retains the "exit-vrf" statement which causes the following
static routes to appear in the default table correctly.
Ticket: CM-23985
Signed-off-by: Don Slice <dslice@cumulusnetwork.com>
Problem caused when nclu is used to create "ip route 1.1.1.0/24
blackhole" because frr-reload.py changed the line to Null0 instead
of blackhole. If nclu tries to delete it using the same line as
entered, the commit fails since it doesn't match.
Ticket: CM-23986
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
peer_flag_modify() will always return BGP_ERR_INVALID_FLAG because
the action was not defined for PEER_FLAG_IFPEER_V6ONLY flag.
```
global PEER_FLAG_IFPEER_V6ONLY = 16384;
global BGP_ERR_INVALID_FLAG = -2;
probe process("/usr/lib/frr/bgpd").statement("peer_flag_modify@/root/frr/bgpd/bgpd.c:3975")
{
if ($flag == PEER_FLAG_IFPEER_V6ONLY && $action->type == 0)
printf("action not found for the flag PEER_FLAG_IFPEER_V6ONLY\n");
}
probe process("/usr/lib/frr/bgpd").function("peer_flag_modify").return
{
if ($return == BGP_ERR_INVALID_FLAG)
printf("return BGP_ERR_INVALID_FLAG\n");
}
```
produces:
action not found for the flag PEER_FLAG_IFPEER_V6ONLY
return BGP_ERR_INVALID_FLAG
$ vtysh -c 'conf t' -c 'router bgp 20' -c 'neighbor eth1 interface v6only remote-as external'
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
When creating a ospf vrf based instance allow it to work
if the vrf has been created *before* we create the ospf
instance.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Running zebra after commit 888756b208
in valgrind produces this item:
==17102== Invalid read of size 8
==17102== at 0x44D84C: rib_dest_from_rnode (rib.h:375)
==17102== by 0x4546ED: rib_process_result (zebra_rib.c:1904)
==17102== by 0x45436D: rib_process_dplane_results (zebra_rib.c:3295)
==17102== by 0x4D0902B: thread_call (thread.c:1607)
==17102== by 0x4CC3983: frr_run (libfrr.c:1011)
==17102== by 0x4266F6: main (main.c:473)
==17102== Address 0x83bd468 is 88 bytes inside a block of size 96 free'd
==17102== at 0x4A35F54: free (vg_replace_malloc.c:530)
==17102== by 0x4CCAC00: qfree (memory.c:129)
==17102== by 0x4D03DC6: route_node_destroy (table.c:501)
==17102== by 0x4D039EE: route_node_free (table.c:90)
==17102== by 0x4D03971: route_node_delete (table.c:382)
==17102== by 0x44D82A: route_unlock_node (table.h:256)
==17102== by 0x454617: rib_process_result (zebra_rib.c:1882)
==17102== by 0x45436D: rib_process_dplane_results (zebra_rib.c:3295)
==17102== by 0x4D0902B: thread_call (thread.c:1607)
==17102== by 0x4CC3983: frr_run (libfrr.c:1011)
==17102== by 0x4266F6: main (main.c:473)
==17102== Block was alloc'd at
==17102== at 0x4A36FF6: calloc (vg_replace_malloc.c:752)
==17102== by 0x4CCAA2D: qcalloc (memory.c:110)
==17102== by 0x4D03D88: route_node_create (table.c:489)
==17102== by 0x4D0360F: route_node_new (table.c:65)
==17102== by 0x4D034F8: route_node_set (table.c:74)
==17102== by 0x4D03486: route_node_get (table.c:327)
==17102== by 0x4CFB700: srcdest_rnode_get (srcdest_table.c:243)
==17102== by 0x4545C1: rib_process_result (zebra_rib.c:1872)
==17102== by 0x45436D: rib_process_dplane_results (zebra_rib.c:3295)
==17102== by 0x4D0902B: thread_call (thread.c:1607)
==17102== by 0x4CC3983: frr_run (libfrr.c:1011)
==17102== by 0x4266F6: main (main.c:473)
==17102==
This is happening because of this order of events:
1) Route is deleted in the main thread and scheduled for rib processing.
2) Rib garbage collection is run and we remove the route node since it
is no longer needed.
3) Data plane returns from the deletion in the kernel and we call
the srcdest_rnode_get function to get the prefix that was deleted.
This recreates a new route node. This creates a route_node with
a lock count of 1, which we freed via the route_unlock_node call.
Then we continued to use the rn pointer. Which leaves us with use
after frees.
The solution is, of course, to just move the unlock the node at the
end of the function if we have a route_node.
Fixes: #3854
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The community_delete and lcommunity_delete functionality was
creating a special string that needed to be specially parsed.
Remove all this string creation and just pass the pertinent
data into the appropriate functions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Commit: 6005fe55bc
Introduced a crash with zebra looking up either the
nbr structure or the mac structure. This is because
the zvni used is NULL and we eventually call a hash_lookup
call that would cause a NULL dereference. Partially
revert this commit to original behavior.
Problems found via clang Static Analyzer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The struct prefix *prefix is really a const struct prefix *
This was causing compile warns->errors on some compilers
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
L3VNI keeps reference to svi interface (ifp).
When a netlink change received there is no flag
that mac has changed. Currently simply overwrite
interface's (ifp) hw_addr (MAC) field.
For originating EVPN type-2 and type-5 routes due to VNI
MAC change, comparison is required to check existing MAC
vs. netlink change MAC field.
Ticket:CM-23850
Reviewed By:CCR-8283
Testing Done:
Validate EVPN type-5 routes originated upon changing MAC address
of L3VNI's SVI inteface via ip link set cmd.
checked show bgp l2vpn evpn route and Rmac field contains new
MAC address.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
In order to iterate over MPLS VPN routes, it's necessary to use
two nested loops (the outer loop iterates over the MPLS VPN RDs,
and the inner loop iterates over the VPN routes from that RD).
The add-path code wasn't doing this, which was leading to lots of
crashes when add-path was enabled for the MPLS VPN SAFI. This patch
fixes the problem.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
If path->net is NULL in the bgp_path_info_free() function, then
bgpd would crash in bgp_addpath_free_info_data() with the following
backtrace:
(gdb) bt
#0 __GI_raise (sig=sig@entry=6) at ../sysdeps/unix/sysv/linux/raise.c:51
#1 0x00007ff7b267a42a in __GI_abort () at abort.c:89
#2 0x00007ff7b39c1ca0 in core_handler (signo=11, siginfo=0x7ffff66414f0, context=<optimized out>) at lib/sigevent.c:249
#3 <signal handler called>
#4 idalloc_free_to_pool (pool_ptr=pool_ptr@entry=0x0, id=3) at lib/id_alloc.c:368
#5 0x0000560096246688 in bgp_addpath_free_info_data (d=d@entry=0x560098665468, nd=0x0) at bgpd/bgp_addpath.c:100
#6 0x00005600961bb522 in bgp_path_info_free (path=0x560098665400) at bgpd/bgp_route.c:252
#7 bgp_path_info_unlock (path=0x560098665400) at bgpd/bgp_route.c:276
#8 0x00005600961bb719 in bgp_path_info_reap (rn=rn@entry=0x5600986b2110, pi=pi@entry=0x560098665400) at bgpd/bgp_route.c:320
#9 0x00005600961bf4db in bgp_process_main_one (safi=SAFI_MPLS_VPN, afi=AFI_IP, rn=0x5600986b2110, bgp=0x560098587320) at bgpd/bgp_route.c:2476
#10 bgp_process_wq (wq=<optimized out>, data=0x56009869b8f0) at bgpd/bgp_route.c:2503
#11 0x00007ff7b39d5fcc in work_queue_run (thread=0x7ffff6641e10) at lib/workqueue.c:294
#12 0x00007ff7b39ce3b1 in thread_call (thread=thread@entry=0x7ffff6641e10) at lib/thread.c:1606
#13 0x00007ff7b39a3538 in frr_run (master=0x5600980795b0) at lib/libfrr.c:1011
#14 0x000056009618a5a3 in main (argc=3, argv=0x7ffff6642078) at bgpd/bgp_main.c:481
Add a null-check protection to fix this problem.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
isisd CLI has some housekeeping code that removes the
"frr-isisd:isis" container from the interface configuration when
IS-IS is disabled for both IPv4 and IPv6 in the corresponding
interface.
The problem is that the code was checking the values of the
"ipv4-routing" and "ipv6-routing" leafs without checking if the
parent "frr-isisd:isis" container was present. So, entering "no
ip[v6] router isis" twice would cause isisd to crash since the
"frr-isisd:isis" container wouldn't be present the second time the
command is processed. Fix this.
isisd aborted: vtysh -c "configure terminal" -c "interface eth99" -c "no ip router isis WORD"
isisd aborted: vtysh -c "configure terminal" -c "interface eth99" -c "no ipv6 router isis"
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Fix bug in the code that compares IPv6 addresses. If memcmp()
returns 0 then the two addresses are equal.
Because of this problem, hash_release() could return NULL in a few
places, leading to the following crashes (found by the CLI fuzzer):
pbrd aborted: vtysh -c "configure terminal" -c "pbr-map WORD seq 100" -c "no set nexthop 2001:db8::1"
pbrd aborted: vtysh -c "configure terminal" -c "nexthop-group NHGROUP" -c "no nexthop 2001:db8::1"
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add a test command to pim that allows you to reset the keepalive timer
for an upstream to it's max value. This is to allow purposeful testing
of cleanup code in pim, by forcing the keeaplive timer to expire later.
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:10 00:00:52 00:00:25 00:02:54 1
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:11 00:00:51 00:00:24 00:02:53 1
robot# test pim keep 192.168.201.136 225.1.0.0
Setting (192.168.201.136,225.1.0.0) to current keep alive time: 210
robot# show ip pim upstream
Iif Source Group State Uptime JoinTimer RSTimer KATimer RefCnt
enp3s0 192.168.201.136 225.1.0.0 NotJ,RegP 00:00:27 00:00:35 00:00:08 00:03:27 1
robot#
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The support of embedded extensions doesn't allow to build the
RPM with and without (for older version). Require new version of
Lbyang with embedded extensions supported
Signed-off-by: Martin Winter <mwinter@opensourcerouting.org>
