Add in a few missing stub route-advert functions; these are
needed to build frr with v6 route adverts disabled.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
As part of checksum calculation for a received packet we were
comparing the checksum returned from in_cksum. Typically
when we calculate the checksum the value stored in the checksum
must be all 0's. Store the received checksum and then set
the checksum to 0 and then compare.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In several places we would send debug messages for failure situations
that really should be errors.
Signed-off-by: Donald Sharpd <sharpd@cumulusnetworks.com>
Using SO_BROADCAST, in the linux kernel, requires a uint32_t to be passed
in for all SOL_SOCKET calls. Modify code to use it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use the zapi_nexthop struct with the mpls_labels
zapi messages instead of the special-purpose (and
more limited) nexthop struct that was being used.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
RFC 4861 states that ipv6 RA messages sent out an interface should
contain all global ipv6 addresses on that interface. This fix adds
that capability. To override the default flags and timer settings
for a particular prefix, the existing "ipv6 nd prefix ..." command
should be used via vtysh under the appropriate interface.
Ticket: CM-20363
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Use a hash walker/iterator instead of a temporary list to
show zebra's nexthop-groups/nexthop-hash-entries.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The top variable has already been derefed by the time we get
to the test to see if it is non-NULL. No need to check it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Nexthop groups as a whole do not make sense to have a vrf'ness
As that you can have a arbitrary number of nexthops that point
to separate vrf's.
Modify the code to make this distinction, by clearly delineating
the line between the nhg and the nexthop a bit better.
Nexthop groups having a vrf_id only make sense if you are using
network namespaces to represent them.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zebra implementation of nexthop groups has
two types of nexthops groups currently. Singleton
objects which have afi's and combined nexthop groups
that do not. Specifically call this out in the code
to make this distinction.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Handling capability received from client. It may contain
GR enable/disable, Stale time changes, RIB update complete
for given AFi, ASAFI and instance. It also has changes for
stale route handling.
Signed-off-by: Santosh P K <sapk@vmware.com>
Add a null check in `handle_recursive_depend()` so it
doesn't try to add a NULL pointer to the RB tree.
This was found with clang SA.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
We were not resetting the nexthop pointer to NULL for each
new read of a nexthop from the zapi route. On the chance we
get a nexthop that does not have a proper type, we will not
create a new nexthop and update that pointer, thus it still
has the last valid one and will create a group with two
pointers to the same nexthop.
Then when it enters any code that iterates the group, it loops
endlessly.
This was found with zapi fuzzing.
```
0x00007f728891f1c3 in jhash2 (k=<optimized out>, length=<optimized out>, initval=12183506) at lib/jhash.c:138
0x00007f728896d92c in nexthop_hash (nexthop=<optimized out>) at lib/nexthop.c:563
0x00007f7288979ece in nexthop_group_hash (nhg=<optimized out>) at lib/nexthop_group.c:394
0x0000000000621036 in zebra_nhg_hash_key (arg=<optimized out>) at zebra/zebra_nhg.c:356
0x00007f72888ec0e1 in hash_get (hash=<optimized out>, data=0x7ffffb94aef0, alloc_func=0x0) at lib/hash.c:138
0x00007f72888ee118 in hash_lookup (hash=0x7f7288de2f10, data=0x7f728908e7fc) at lib/hash.c:183
0x0000000000626613 in zebra_nhg_find (nhe=0x7ffffb94b080, id=0, nhg=0x6020000032d0, nhg_depends=0x0, vrf_id=<optimized out>,
afi=<optimized out>, type=<optimized out>) at zebra/zebra_nhg.c:541
0x0000000000625f39 in zebra_nhg_rib_find (id=0, nhg=<optimized out>, rt_afi=AFI_IP) at zebra/zebra_nhg.c:1126
0x000000000065f953 in rib_add_multipath (afi=AFI_IP, safi=<optimized out>, p=0x7ffffb94b370, src_p=0x0, re=0x6070000013d0,
ng=0x7f728908e7fc) at zebra/zebra_rib.c:2616
0x0000000000768f90 in zread_route_add (client=0x61f000000080, hdr=<optimized out>, msg=<optimized out>, zvrf=<optimized out>)
at zebra/zapi_msg.c:1596
0x000000000077c135 in zserv_handle_commands (client=<optimized out>, msg=0x61b000000780) at zebra/zapi_msg.c:2636
0x0000000000575e1f in main (argc=<optimized out>, argv=<optimized out>) at zebra/main.c:309
```
```
(gdb) p *nhg->nexthop
$4 = {next = 0x5488e0, prev = 0x5488e0, vrf_id = 16843009, ifindex = 16843009, type = NEXTHOP_TYPE_IFINDEX, flags = 8 '\b', {gate = {ipv4 = {s_addr = 0},
ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0, 0}, __u6_addr32 = {0, 0, 0, 0}}}},
bh_type = BLACKHOLE_UNSPEC}, src = {ipv4 = {s_addr = 0}, ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0, 0, 0, 0, 0, 0,
0}, __u6_addr32 = {0, 0, 0, 0}}}}, rmap_src = {ipv4 = {s_addr = 0}, ipv6 = {__in6_u = {__u6_addr8 = '\000' <repeats 15 times>, __u6_addr16 = {0, 0,
0, 0, 0, 0, 0, 0}, __u6_addr32 = {0, 0, 0, 0}}}}, resolved = 0x0, rparent = 0x0, nh_label_type = ZEBRA_LSP_NONE, nh_label = 0x0, weight = 1 '\001'}
(gdb) quit
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Since we are using a UNIQUE RB tree, we need to handle the
case of adding in a duplicate entry into it.
The list API code returns NULL when a successfull add
occurs, so lets pull that handling further up into
the connected handlers. Then, free the allocated
connected struct if it is a duplicate.
This is a pretty unlikely situation to happen.
Also, pull up the RB handling of _del RB API as well.
This was found with the zapi fuzzing code.
```
==1052840==
==1052840== 200 bytes in 5 blocks are definitely lost in loss record 545 of 663
==1052840== at 0x483BB1A: calloc (vg_replace_malloc.c:762)
==1052840== by 0x48E1008: qcalloc (memory.c:110)
==1052840== by 0x44D357: nhg_connected_new (zebra_nhg.c:73)
==1052840== by 0x44D300: nhg_connected_tree_add_nhe (zebra_nhg.c:123)
==1052840== by 0x44FBDC: depends_add (zebra_nhg.c:1077)
==1052840== by 0x44FD62: depends_find_add (zebra_nhg.c:1090)
==1052840== by 0x44E46D: zebra_nhg_find (zebra_nhg.c:567)
==1052840== by 0x44E1FE: zebra_nhg_rib_find (zebra_nhg.c:1126)
==1052840== by 0x45AD3D: rib_add_multipath (zebra_rib.c:2616)
==1052840== by 0x4977DC: zread_route_add (zapi_msg.c:1596)
==1052840== by 0x49ABB9: zserv_handle_commands (zapi_msg.c:2636)
==1052840== by 0x428B11: main (main.c:309)
```
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Zebra will have special handling for clients with GR enabled.
When client disconnects with GR enabled, then a stale client
will be created and its RIB will be retained till stale timer
or client comes up and updated its RIB.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
Adding header files changes where structure to hold
received graceful restart info from client is defined.
Also there are changes for show commands where exisiting
commands are extended.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
Add a config that disables use of kernel-level nexthop ids.
Currently, zebra always uses nexthop ids if the kernel supports
them.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When we are receiving a kernel route, with an admin distance
of 255 we are not marking it as installed. This route
should be marked as installed.
New behavior:
K>* 4.5.7.0/24 [255/8192] via 192.168.209.1, enp0s8, 00:10:14
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
commit: 0eb97b860d
Removed this chunk of code in zebra:
- if (ifp)
- if (connected_is_unnumbered(ifp))
- SET_FLAG(nexthop->flags, NEXTHOP_FLAG_ONLINK);
Effectively if we had a NEXTHOP_TYPE_IPV4_IFINDEX we would
auto set the onlink flag. This commit dropped it for some reason.
Add it back in an intelligent manner.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
