Send/Receive:
This field indicates whether the sender is (a) able to receive
multiple paths from its peer (value 1), (b) able to send
multiple paths to its peer (value 2), or (c) both (value 3) for
the <AFI, SAFI>.
If any other value is received, then the capability SHOULD be
treated as not understood and ignored [RFC5492].
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
We send this capability for iBGP peers by default. Recently OAD support was
merged, and we should adopt sending the capability according to OAD as well.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
We shouldn't set it blindly once the packet is received, but first we have to
do some sanity checks.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Also:
- replace all /* fallthrough */ comments with portable fallthrough;
pseudo keyword to accomodate both gcc and clang
- add missing break; statements as required by older versions of gcc
- cleanup some code to remove unnecessary fallthrough
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When we have RX/TX flags, but received only TX, we should clear RX flag, to avoid
receiving additional paths.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Accept the BGP Link-State AFI/SAFI capability when received from a peer
OPEN message.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Make sure we don't exceed the maximum of BGP_MAX_SOFT_VERSION.
The Capability Length SHOULD be no greater than 64.
Reported-by: Iggy Frankovic <iggyfran@amazon.com>
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Useful to have it for datacenter profile only, disabled for traditional.
If the peer is not established or established, but has no description set,
we will show the FRR version instead, which is kinda handy to have instead of
nothing.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
More details: https://www.rfc-editor.org/rfc/rfc8810.html
Not sure if we want to maintain the old code more.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
It's not 4 bytes, it was assuming the same as Graceful-Restart tuples.
LLGR has more 3 bytes (Long-lived Stale Time).
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Implement: https://datatracker.ietf.org/doc/html/draft-abraitis-bgp-version-capability
Tested with GoBGP:
```
% ./gobgp neighbor 192.168.10.124
BGP neighbor is 192.168.10.124, remote AS 65001
BGP version 4, remote router ID 200.200.200.202
BGP state = ESTABLISHED, up for 00:01:49
BGP OutQ = 0, Flops = 0
Hold time is 3, keepalive interval is 1 seconds
Configured hold time is 90, keepalive interval is 30 seconds
Neighbor capabilities:
multiprotocol:
ipv4-unicast: advertised and received
ipv6-unicast: advertised
route-refresh: advertised and received
extended-nexthop: advertised
Local: nlri: ipv4-unicast, nexthop: ipv6
UnknownCapability(6): received
UnknownCapability(9): received
graceful-restart: advertised and received
Local: restart time 10 sec
ipv6-unicast
ipv4-unicast
Remote: restart time 120 sec, notification flag set
ipv4-unicast, forward flag set
4-octet-as: advertised and received
add-path: received
Remote:
ipv4-unicast: receive
enhanced-route-refresh: received
long-lived-graceful-restart: advertised and received
Local:
ipv6-unicast, restart time 10 sec
ipv4-unicast, restart time 20 sec
Remote:
ipv4-unicast, restart time 0 sec, forward flag set
fqdn: advertised and received
Local:
name: donatas-pc, domain:
Remote:
name: spine1-debian-11, domain:
software-version: advertised and received
Local:
GoBGP/3.10.0
Remote:
FRRouting/8.5-dev-MyOwnFRRVersion-gdc92f44a45-dirt
cisco-route-refresh: received
Message statistics:
```
FRR side:
```
root@spine1-debian-11:~# vtysh -c 'show bgp neighbor 192.168.10.17 json' | \
> jq '."192.168.10.17".neighborCapabilities.softwareVersion.receivedSoftwareVersion'
"GoBGP/3.10.0"
root@spine1-debian-11:~#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
In bgp_open_option_parse the code is checking that the
stream has at least 2 bytes to read ( the opt_type and
the opt_length). However if BGP_OPEN_EXT_OPT_PARAMS_CAPABLE(peer)
is configured then FRR is reading 3 bytes. Which is not good
since the packet could be badly formateed. Ensure that
FRR has the appropriate data length to read the data.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
In peek_for_as4_capability the code is checking that the
stream has at least 2 bytes to read ( the opt_type and the
opt_length ). However if BGP_OPEN_EXT_OPT_PARAMS_CAPABLE(peer)
is configured then FRR is reading 3 bytes. Which is not good
since the packet could be badly formated. Ensure that
FRR has the appropriate data length to read the data.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Just adding a support for peer-groups, because now it's not possible to
configure BGP role for peer-groups.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
N-bit flag should be exchanged in BGP OPEN messages, not only when the
bgpd is restarted/started.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Also, add N-Bit (Notification) flag for Graceful Restart.
This is a preparation for RFC8538.
More information: https://datatracker.ietf.org/doc/html/rfc8538
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The compiler is, rightly, pointing out that in some cases it is
possible that the pkt_afi and pkt_safi values are not properly
set and could result in a use before initialized. I do not
actually belive that this is possible, but let's make the compiler
happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
