...so that multiple functions can be subscribed.
The create/destroy hooks are renamed to real/unreal because that's what
they *actually* signal.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
XSTRDUP and then calling strsep mangles the
pointer returned by XSTRDUP. Keep a copy
of the orig and when we are done, free that instead.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
If VRF is not found by the given name, validate it and return an error.
Fixes: 76b2bc97e7 ("staticd: Accept full blackhole typed keywords for ip_route_cmd")
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Before this patch we allow entering next-hop interface address as any string.
Like, we can type: `ip route 10.10.10.10/32 bla`, but this will create a blackhole
route instead of using an interface `bla`.
The same is with reject.
After the patch:
```
$ vtysh -c 'con' -c 'ip route 10.10.10.100/32 bla'
ERROR: SET_CONFIG request failed, Error: nexthop interface name must be (reject, blackhole)
$ ip link show dev bla
472: bla: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc fq_codel state DOWN mode DEFAULT group default qlen 1000
link/ether fa:45:bd:f1:f8:f0 brd ff:ff:ff:ff:ff:ff
$ vtysh -c 'sh run | include ip route'
$ vtysh -c 'con' -c 'ip route 10.10.10.100/32 blac'
$ vtysh -c 'sh run | include ip route'
ip route 10.10.10.100/32 blackhole
$ vtysh -c 'con' -c 'no ip route 10.10.10.100/32 blac'
$ vtysh -c 'sh run | include ip route'
$ vtysh -c 'con' -c 'ip route 10.10.10.100/32 blackhole'
$ vtysh -c 'sh run | include ip route'
ip route 10.10.10.100/32 blackhole
$ vtysh -c 'con' -c 'no ip route 10.10.10.100/32 blackhole'
$ vtysh -c 'sh run | include ip route'
$ vtysh -c 'con' -c 'ip route 10.10.10.100/32 Null0'
$ vtysh -c 'sh run | include ip route'
ip route 10.10.10.100/32 Null0
$ vtysh -c 'con' -c 'no ip route 10.10.10.100/32 Null0'
$ vtysh -c 'sh run | include ip route'
$
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
When displaying the configuration, the order of nexthop-vrf is wrong,
because the default VRF is not displayed, but still compared as the word
"default". Therefore it is placed in the middle of the list instead of
always being the first one.
Before the fix:
```
ip route 1.1.1.0/24 2.2.2.2 nexthop-vrf ccc
ip route 1.1.1.0/24 2.2.2.2
ip route 1.1.1.0/24 2.2.2.2 nexthop-vrf eee
```
After the fix:
```
ip route 1.1.1.0/24 2.2.2.2
ip route 1.1.1.0/24 2.2.2.2 nexthop-vrf ccc
ip route 1.1.1.0/24 2.2.2.2 nexthop-vrf eee
```
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
vrf BELLA
ip route 1.1.1.1/32 192.168.1.1 bfd profile test
exit-vrf
Before patch:
# do show bfd peers
BFD Peers:
peer 192.168.1.1 vrf default
After patch:
# do show bfd peers
BFD Peers:
peer 192.168.1.1 vrf BELLA
Signed-off-by: Dmitrii Turlupov <turlupov@zts.ru>
Code is no longer using a global FE "client context", and instead
creates client objects, rename the structure and it's uses to reflect this.
Remove an obfuscating abstraction layer whose existence was entirely
based on using a uintptr_t rather than a pointer to an declared-only struct.
Change multi-duty "params" structure into a single duty callbacks one.
Remove unsupported API code.
Signed-off-by: Christian Hopps <chopps@labn.net>
When daemons transition to mgmtd they should stop reading their split config
files, and let mgmtd do that, otherwise things can get out of sync.
Signed-off-by: Christian Hopps <chopps@labn.net>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This commmit introduces Staticd as a backend client for the MGMTd
framework. All the static commands will be diverted to the MGMT
daemon and will use the transactional model to make changes to the
internal state. Similar mechanism can be used by other daemons to use
the MGMT framework in the future.
This commit includes the following functionalities in the changeset:
1. Diverts all the staticd (config only) commands to MGMTd.
2. Enrolls staticd as a backend client to use the MGMT framework.
3. Modify the staticd NB config handlers so that they can be compiled
into a library and loaded in the MGMTd process context.
Co-authored-by: Pushpasis Sarkar <pushpasis@gmail.com>
Co-authored-by: Abhinay Ramesh <rabhinay@vmware.com>
Co-authored-by: Ujwal P <ujwalp@vmware.com>
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Prevent a use after free and tell the bfd subsystem
we are shutting down in staticd.
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460:==2264460==ERROR: AddressSanitizer: heap-use-after-free on address 0x61f000004698 at pc 0x7f65d1eb11b2 bp 0x7ffdbface490 sp 0x7ffdbface488
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460-READ of size 4 at 0x61f000004698 thread T0
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #0 0x7f65d1eb11b1 in zclient_bfd_command lib/bfd.c:307
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #1 0x7f65d1eb20f5 in _bfd_sess_send lib/bfd.c:507
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #2 0x7f65d20510aa in thread_call lib/thread.c:1989
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #3 0x7f65d2051f0a in _thread_execute lib/thread.c:2081
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #4 0x7f65d1eb271b in _bfd_sess_remove lib/bfd.c:544
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #5 0x7f65d1eb278d in bfd_sess_free lib/bfd.c:553
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #6 0x7f65d1eb5400 in bfd_protocol_integration_finish lib/bfd.c:1029
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #7 0x7f65d1f42f77 in hook_call_frr_fini lib/libfrr.c:41
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #8 0x7f65d1f494a1 in frr_fini lib/libfrr.c:1199
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #9 0x563b7abefd76 in sigint staticd/static_main.c:70
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #10 0x7f65d200ef91 in frr_sigevent_process lib/sigevent.c:115
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #11 0x7f65d204fac6 in thread_fetch lib/thread.c:1758
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #12 0x7f65d1f49377 in frr_run lib/libfrr.c:1184
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #13 0x563b7abefed1 in main staticd/static_main.c:160
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #14 0x7f65d1b92d09 in __libc_start_main ../csu/libc-start.c:308
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460- #15 0x563b7abefa99 in _start (/usr/lib/frr/staticd+0x15a99)
./bfd_topo3.test_bfd_topo3/r4.staticd.asan.2264460-
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Passing a pre-formatted buffer in these places needs a `"%s"` in front
so it doesn't get formatted twice.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Daemons like staticd already implement nexthop zapi (un)registration.
b7ca809d1c ("lib: BFD automatic source selection") has implemented a
concurrent nexthop (un)registration. Some nexthop could be unregistred
by the bfd whereas they were still needed by the daemon.
Let the deamons deal with nexthop zapi (un)registration.
Fixes: b7ca809d1c ("lib: BFD automatic source selection")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
b7ca809d1c ("lib: BFD automatic source selection") has added a dedicated
zclient socket for nht tracking. Since the bfd lib is used by daemons
that already has a zclient socket, those daemons has now a second
zclient socket. However, zebra does not distinguish the two zclient
sessions. For example, the interfaces are asked a second via
zebra_message_send(zclient, ZEBRA_INTERFACE_ADD, VRF_DEFAULT) in
zclient_start(). As a result, callbacks functions like bgp_ifp_create()
are called a second time, which causes some processing overhead and
might cause bugs.
Re-use the existing zclient socket for nht tracking.
Note that BFD automatic source selection is only currently implemented
in staticd. Other daemons will require to add the following in their
ZEBRA_NEXTHOP_UPDATE callback function:
> if (zclient->bfd_integration)
> bfd_nht_update(&matched, &nhr);
Fixes: b7ca809d1c ("lib: BFD automatic source selection")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
This command helps in troubleshooting static bfd feature.
Add traces upon bfd events.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When configuring a route with multiple next hops on boot and the
interface is missing the route never shows up (even after interface is
properly learned).
Fix: force route clean up by uninstalling it and putting it back
entirely instead of just updating the missing next hop.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Implement all BFD integration northbound callbacks and integrate BFD
with `staticd` route installation procedure.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When compiling with -fsanitize=thread. I started getting this error:
staticd/static_zebra.c: In function ‘static_zebra_nht_get_prefix’:
staticd/static_zebra.c:316:1: error: control reaches end of non-void function [-Werror=return-type]
316 | }
| ^
Just to make future efforts still work, let's just make the compiler happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Simplify all DEFUNs by moving all logic to the northbound translation
function and transforming all function parameters into a single
structure.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There are lib debugs being set but never show up in
`show debug` commands because there was no way to show
that they were being used. Add a bit of infrastructure
to allow this and then use it for `debug route-map`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
