During shutdown, the ospf->maxage_lsa table is iterated over to
clean up all existing entries. While doing that, route_unlock_node()
should be called only for the nodes that have an associated entry,
otherwise the table will get corrupted and ospfd will crash.
As a side note, using a routing table to store MaxAge LSAs was a
very poor choice of a data structure, considering that a simple
rb-tree or hash table would get the job done with a much simpler
(and less error-prone) API. Something to cleanup in the future...
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Since a single ospfd process can have multiple OSPF interfaces
configured, we need to separate the global GR initialization and
termination from per-instance initialization and termination.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Currently, passive interface flag is configured from the router node
using "passive-interface IFNAME". There are multiple problems with this
command:
- it is not in line with all other interface-related commands - other
parameters are configured from the interface node using "ip ospf"
prefix
- it is not in line with OSPFv3 - passive flag is configured from the
interface node using "ipv6 ospf6 passive" command
- most importantly, it doesn't work correctly when the interface is in
a different VRF - when using VRF-lite, it incorrectly changes the
vrf_id of the interface and it becomes desynced with the actual state;
when using netns, it creates a new fake interface and configures it
instead of configuring the necessary interface
To fix all the problems, this commit adds a new command to the interface
configuration node - "ip ospf passive". The purpose of the command is
completely the same, but it works correctly in a multi-VRF environment.
The old command is preserved for the backward compatibility, but the
warning is added that it is deprecated because it doesn't work correctly
with VRFs.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
If the default route redistribution is configured in OSPF router before
the VRF is created, then this is not currently registered in zebra after
the VRF creation.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, if NSSA area is configured before redistribution is enabled,
Type-7 LSA's are installed and flooded. But if NSSA area is configured
after redistribution is enabled, Type-7 LSA's are not installed.
With this change, when NSSA area is configured, schedule a task that
scans for external LSA's. If they exist, install Type-7 and flood to
all NSSA Areas.
There already was an attempt to fix this problem in 0f321812f where
ospf_asbr_nssa_redist_task() was triggered in ospf_abr_task_timer().
This turns out to be incorrect place for this operation because it's
a one-off operation needed only after "area <ID> nssa" execution. And
ospf_abr_task_timer() is a periodic operation. Triggering
ospf_asbr_nssa_redist_task() in ospf_abr_task_timer() caused a problem
that was fixed in 945eec2b6 making the problem with NSSA area
configured after redistribution actual again.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
Instead of trying to maintain if_ospf_cli_count, let's directly count
the number of configured interfaces when it is needed. Current approach
sometimes leads to an incorrect counter.
Fixes#8321.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Description:
OSPF does not have an option to control the maximum multiple
equal cost paths to reach a destination/route(ECMP).
Currently, it is using the system specific max multiple paths.
But Somtimes, It requires to control the multiple paths from ospf.
This cli helps to configure the max number multiple paths in ospf.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
This command will trigger the OSPF forwarding address suppression in
translated type-5 LSAs, causing a NSSA ABR to use 0.0.0.0 as a forwarding
address instead of copying the address from the type-7 LSA
Example: In a topology like: R1 --- R2(ABR) --- R3(ASBR)
R3 is announcing a type-7 LSA that is translated to type-5 by the R2 ABR.
The forwarding address in the type-5 is by default copied from the type-7
r1# sh ip os da external
AS External Link States
LS age: 6
Options: 0x2 : *|-|-|-|-|-|E|-
LS Flags: 0x6
LS Type: AS-external-LSA
Link State ID: 3.3.3.3 (External Network Number)
Advertising Router: 10.0.25.2
LS Seq Number: 80000001
Checksum: 0xcf99
Length: 36
Network Mask: /32
Metric Type: 2 (Larger than any link state path)
TOS: 0
Metric: 20
Forward Address: 10.0.23.3 <--- address copied from type-7 lsa
External Route Tag: 0
r2# sh ip os database
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.23.3 8 0x80000001 0x431d E2 3.3.3.3/32 [0x0]
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 0 0x80000001 0xcf99 E2 3.3.3.3/32 [0x0]
r2# conf t
r2(config)# router ospf
r2(config-router)# area 1 nssa suppress-fa
r2(config-router)# exit
r2(config)# exit
r2# sh ip os database
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.23.3 66 0x80000001 0x431d E2 3.3.3.3/32 [0x0]
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 16 0x80000002 0x0983 E2 3.3.3.3/32 [0x0]
r1# sh ip os da external
OSPF Router with ID (11.11.11.11)
AS External Link States
LS age: 34
Options: 0x2 : *|-|-|-|-|-|E|-
LS Flags: 0x6
LS Type: AS-external-LSA
Link State ID: 3.3.3.3 (External Network Number)
Advertising Router: 10.0.25.2
LS Seq Number: 80000002
Checksum: 0x0983
Length: 36
Network Mask: /32
Metric Type: 2 (Larger than any link state path)
TOS: 0
Metric: 20
Forward Address: 0.0.0.0 <--- address set to 0
External Route Tag: 0
r2# conf t
r2(config)# router ospf
r2(config-router)# no area 1 nssa suppress-fa
r2(config-router)# exit
r1# sh ip os da external
OSPF Router with ID (11.11.11.11)
AS External Link States
LS age: 1
Options: 0x2 : *|-|-|-|-|-|E|-
LS Flags: 0x6
LS Type: AS-external-LSA
Link State ID: 3.3.3.3 (External Network Number)
Advertising Router: 10.0.25.2
LS Seq Number: 80000003
Checksum: 0xcb9b
Length: 36
Network Mask: /32
Metric Type: 2 (Larger than any link state path)
TOS: 0
Metric: 20
Forward Address: 0.0.0.0 <--- address set to 0
External Route Tag: 0
r2# conf t
r2(config)# router ospf
r2(config-router)# no area 1 nssa suppress-fa
r2(config-router)# exit
r1# sh ip os da external
OSPF Router with ID (11.11.11.11)
AS External Link States
LS age: 1
Options: 0x2 : *|-|-|-|-|-|E|-
LS Flags: 0x6
LS Type: AS-external-LSA
Link State ID: 3.3.3.3 (External Network Number)
Advertising Router: 10.0.25.2
LS Seq Number: 80000003
Checksum: 0xcb9b
Length: 36
Network Mask: /32
Metric Type: 2 (Larger than any link state path)
TOS: 0
Metric: 20
Forward Address: 10.0.23.3 <--- address copied from type-7 lsa
External Route Tag: 0
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
Store instance index at startup and use it when processing vty commands.
The instance itself may be created and deleted by the user in runtime
using `[no] router ospf X` command.
Fixes#7908
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
The calling function of ospf_nbr_nbma_lookup_next calls
this function and then immediately returns when it
gets the NULL. Just cleanup a bit more code.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The #if 0 code in ospfd, has not been compiled since at least
2012. If we are at least 9 years old at this point with no effort
to use or save, we should just get rid of it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Implement the below 2 CLIs to clear the current data in the process
and neighbor data structure.
1. clear ip ospf process
2. clear ip ospf neighbor
Signed-off-by: Mobashshera Rasool <mrasool@vmware.com>
OSPF instance initialization was moved from "router ospf" vty command to
ospf_get function some time ago but the same thing must be done in
ospf_get_instance function used when multi-instance mode is enabled.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When an ABR NSSA router is configured to be ALWAYS the translator:
r22(config-router)# area 1 nssa translate-always
It will advertise this condition in the type-1 LSA setting the Nt
bit, taking over the translator role from r33
r22# show ip ospf
We are an ABR and always an NSSA Translator.
r33# show ip ospf
We are an ABR, but not the NSSA Elected Translator.
However when the command above is removed:
r22(config-router)# no area 1 nssa translate-always
the bit Nt needs to be cleared otherwise we end up with no translator
in the area
r22# show ip ospf
We are an ABR, but not the NSSA Elected Translator.
r33# show ip ospf
We are an ABR, but not the NSSA Elected Translator.
This PR forces the ABR to send a type-1 LSA with the Nt bit updated
according to the translator role
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
Description:
Summarisation initilisation and de-init apis.
summary route table will be created as part of initilisation
at the time of ospf deamon init.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Currently, only default area parameter is used for initialization, but
we should use area parameters with interfaces address as well.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Move ospf initialization to the actual place where it is created.
We don't need to do that every time "router ospf" is entered.
Also remove a couple of useless checks that can never be true.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
ospf_router_id_update checks for ospf->oi_running, but it'll never be 1
right after creation by ospf_new.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
OSPFD sends ARP proactively to speed up convergence for /32 networks
on a p2p connection. It is only an optimization, so it can be disabled.
It is enabled by default.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
On startup of both zebra and ospfd. If ospfd has not
received a valid router-id *but* has received interface
data, interfaces will not be turned on in the state
machine. When ospf finally receives a valid router-id
it would never actually kick the state machine into
action for those interfaces it has been configured for.
Modify ospf on router id changes, *if* the old
router id was INADDR_ANY *and* the interface is
operative *and* the oi->state is ISM_Down, give
it the old kick in the patooeys
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Default originate with route-map was broken. Routemap
was not getting applied for redistribute route but was
getting applied default route itself. No default route
was originated even when routemap was satisfied.
Signed-off-by: Santosh P K <sapk@vmware.com>
Fix a number of library and daemon issues so that daemons can
call frr_fini() during normal termination. Without this,
temporary logging files are left behind in /var/tmp/frr/.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Some preprocessor constants converted to enums to make the names usable
in the preprocessor.
v2: better isolation between core and vty code to make future northbound
conversion easier.
Signed-off-by: David Lamparter <equinox@diac24.net>
Well, "obviously" this condition block is pointless, since
ospf_router_id_update is called afterwards unconditionally...
(And even if it were needed, it would need to go in ospf_get too.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Add a helper function to return the name of the vrf we are in
so it can be used as part of debug strings.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
vrf hook handler associated to updating the vrf default name is added.
Then, when creating default ospf vrf instance, the vrf identifier will
be associated to the correct default vrf name.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Neither ospf_external_lsa_originate_timer() nor
ospf_default_originate_timer() are actually timers. They're only
executed on router-ID changes to refresh a particular LSA type.
Signed-off-by: David Lamparter <equinox@diac24.net>
no router ospf triggers to cancel all threads
including read/write (receive/send packets) threads,
cleans up resources fd, message queue and data.
Last job of write (packet) thread invoked where the
ospf instance is referenced is not running nor
the socket fd valid.
Write thread callback should check if fd is valid and
ospf instance is running before proceeding to send a
message over socket.
Ticket:CM-20095
Testing Done:
Performed the multiple 'no router ospf' with the fix
in topology where the crash was seen.
Post fix the crash is not observed.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
The shutdown of ospf was causing crashes because the shutdown
was calling a ALL_LIST_ELEMENTS_RO macro and modifying the
underlying data structures. Switch to using ALL_LIST_ELEMENTS.
This is caused by this change:
commit f9e1501aea5d429be2ecda1a3e2bde17e6ad5e4b
Author: Donald Sharp <sharpd@cumulusnetworks.com>
Date: Wed Feb 27 15:08:29 2019 -0500
ospfd: Cleanup ospf->redist and ospf->external on shutdown
Effectively my original testing for this only had one external
route and as such we would not have a crash here. It only
showed up after multiple externals have been introduced.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These two data types were written to handle redistribute
and external data types. On shutdown cleanup the memory
allocated to these if we are doing redistribution.
This was found using valgrind.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When creating a ospf vrf based instance allow it to work
if the vrf has been created *before* we create the ospf
instance.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
avoid counting twice the number of areas configured, when entering back
to router ospf config node.
PR=61288
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Acked-by: Emmanuel Vize <emmanuel.vize@6wind.com>
when adding/removing virtual links per interface, sometimes, the ospf
virtual link can not be removed, whereas the associated area is already
removed. Do not remove the area while a virtual link is yet configured.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
1) stream allocation cannot fail
2) some warnings were removed when functions safely ignored
the calling parameters being wrong.
3) some warnings were removed when functions did not consider
the state as an error since we did not return an error code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The Vrf aliases can be known with a specific hook. That hook will then,
from zebra propagate the information to the relevant zapi clients.
The registration hook function is the same for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The ospf_external_route_lookup function was not
being used so let's just remove it.
Unfortunately the removal was not quite so simple as
that ospf_asbr.h was being used to generate a reference
for the `struct ospf_route` data structure, so we
need to fix up the compile by fixing up header
inclusions so that ospf_route.h is actually included
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When calling route_map_finish, every place that we do we must
first set the deletion event to NULL, or we will create an infinite
loop, if we are using the delayed route-map application code.
As such we might as well just make the route_map_finish code
do this work, as that there is really no viable alternative here
and route_map_finish should only be called on shutdown.
This fixes an infinite loop in zebra on shutdown when there
are route-maps.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Otherwise if it is scheduled the thread pointer will be accessed after
the shutdown task finishes accessing, having deleted the structure that
owns said pointer, which causes a heap UAF.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The change consists in taking into account of the VRF identifier upon
which the ospf socket is created. Moreover, if the VRF is a netns
backend, then it is not necessary to perform the bind operations to vrf
device.
Also, when a VRF instance is enabled, it informs ospf VRF, and automatically
OSPF VRF benefits from it. Reversely, when VRF instance is disabled,
then OSPF VRF will be disabled too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf identifier in the ospf_vrf_enable routine is never read, then
does not need to be initialised.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When preforming CI test, CLI command 'no router ospf' followed by a
'router ospf' is performed to clean up the previous configuration.
Ospfd crash when configuring 'netwoark area'.
This is due to opsf_opaque_term() introduce in previous commit that cause this
crash. It remove not only Opaque LSA but also the list through the call to
'list_delete_and_null()' function. Same take place in 'ospf_mpls_te_term()',
'ospf_router_info_term()' and 'ospf_ext_term()' function.
New set of 'ospf_XXX_finish()' has been introduced to solve this issue while
keeping the possiblity to terminate properly the Opaque LSA and remove MPLS
LFIB entries set by Segment Routing.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Following various review, following files have been modfied:
- All: Change u_intXX_t typedef to standard uintXX_t types
- doc/OSPF-SR.rst: Update doc in particular the Linux Kernel configuration
section
- doc/ospfd.texi: Update CLI
- ospfd/ospf_dump.[c,h]: Add new 'debug ospf sr' when performing 'sh run'
- ospfd/ospf_ext.[c, h]: Various bug corrections notably to handle flooding of
Extended Prefix at startup. iFix TLVs size for LAN Adjacency.
Update Licence as per Community.md
- ospfd/ospf_opaque.c: Add proper termination function call to remove MPLS entries
- ospfd/ospf_ri.[c,h]: Bug corrections
- ospfd/ospf_sr.[c,h]: Various bug corrections, notably to determine the nexthop
SR Node. Add support to 'no-php-flag'.
Update Licence as per Community.md
- ospfd/ospfd.c: Add call to 'ospf_opaque_term()'
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Call Route-map, prefix-list clean up routines and
vrf clearnup during ospf daemon exit routine.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Issue 1652 was related to OSPF Crash on termination when ospf is
configured to flood self Opaque LSA e.g TE or RI Opaque LSA.
Analysis:
The problem resides in free_opaque_info_per_type() line 576 of
ospf_opaque.c. Once LSA flush, the function removes by calling
listnode_delete() function the opaque_info_per_type data structure.
However, this is also performed at the upper level function
ospf_opaque_type10lsa_term() which call list_delete_and_null() function.
This result into a double free pointer exception.
Solution:
Remove call to listnode_delete() calls in free_opaque_info_per_type()
function as it is done by list_delete_and_null(). Delete lines 592 - 615.
Remove also second call to ospf_opaque_type10lsa_term() in ospfd.c line 848.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
