This includes:
1. Defining message formats
2. Stream Decoding after receiving the message at PIM
3. Handling MLAG UP & Down Notifications
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When zebra gets a callback from the kernel that an interface has
actually been deleted *and* the end users has not configured
the interface, then allow for deletion of the interface from zebra.
This is especially important in a docker environment where containers
and their veth interfaces are treated as ephermeal. FRR can quickly
have an inordinate amount of interfaces sitting around that are
not in the kernel and we have no way to clean them up either.
My expectation is that this will cause a second order crashes
in upper level protocols, but I am not sure how to catch these
and fix them now ( suggestions welcome ). There are too many
use patterns and order based events that I cannot know for certain
that we are going to see any at all, until someone sees this problem
as a crash :( I do not recommend that this be put in the current
stabilization branch and allow this to soak in master for some time
first.
Testing:
sharpd@donna ~/frr4> sudo ip link add vethdj type veth peer name vethjd
sharpd@donna ~/frr4> sudo ip link add vethaa type veth peer name vethab
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa down default
vethab down default
vethdj down default
vethjd down default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo ip link set vethaa up
sharpd@donna ~/frr4> sudo ip link set vethab up
sharpd@donna ~/frr4> sudo ip link del vethdj
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa up default
vethab up default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo ip link del vethaa
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo ip link add vethaa type veth peer name vethab
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa down default
vethab down default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo vtysh -c "show run"
Building configuration...
Current configuration:
!
frr version 7.2-dev
frr defaults datacenter
hostname donna.cumulusnetworks.com
log stdout
no ipv6 forwarding
!
ip route 192.168.3.0/24 192.168.209.1
ip route 192.168.4.0/24 blackhole
ip route 192.168.5.0/24 192.168.209.1
ip route 192.168.6.0/24 192.168.209.1
ip route 192.168.7.0/24 99.99.99.99 nexthop-vrf EVA
ip route 192.168.8.0/24 192.168.209.1
ip route 4.5.6.7/32 12.13.14.15
!
interface dummy1
ip address 12.13.14.15/32
!
interface vethaa
description FROO
!
line vty
!
end
sharpd@donna ~/frr4> sudo ip link del vethaa
sharpd@donna ~/frr4> sudo vtysh -c "show int brief"
Interface Status VRF Addresses
--------- ------ --- ---------
dummy1 down default
enp0s3 up default 10.0.2.15/24
enp0s8 up default 192.168.209.2/24
enp0s9 up default 192.168.210.2/24
enp0s10 up default 192.168.212.4/24
lo up default 10.22.89.38/32
vethaa down default
virbr0 up default 192.168.122.1/24
virbr0-nic down default
sharpd@donna ~/frr4> sudo vtysh -c "show run"
Building configuration...
Current configuration:
!
frr version 7.2-dev
frr defaults datacenter
hostname donna.cumulusnetworks.com
log stdout
no ipv6 forwarding
!
ip route 192.168.3.0/24 192.168.209.1
ip route 192.168.4.0/24 blackhole
ip route 192.168.5.0/24 192.168.209.1
ip route 192.168.6.0/24 192.168.209.1
ip route 192.168.7.0/24 99.99.99.99 nexthop-vrf EVA
ip route 192.168.8.0/24 192.168.209.1
ip route 4.5.6.7/32 12.13.14.15
!
interface dummy1
ip address 12.13.14.15/32
!
interface vethaa
description FROO
!
line vty
!
end
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
During initialization, the northbound detects if any required
callback is missing (fatal error) or if any unneeded callback is
present (warning).
There are three callbacks, however, that should require special
handling: get_next(), get_keys() and lookup_entry().
These callbacks are normally unneeded for configuration lists. But,
if a configuration list is augmented with new state nodes by another
module, then the three callbacks mentioned above become required. In
this case, never log a warning when these callbacks are implemented
when they are not needed, since this depends on context (e.g. some
daemons might augment "frr-interface" while others don't).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When a configuration transaction is being performed, the northbound
uses a red-black tree to store the configuration changes that need to
be processed. The problem is that we were sorting the configuration
changes based on their XPaths (and callback priorities). This means
the original order of the changes wasn't being respected, which is
a problem for lists that use the "ordered-by user" statement. To
fix this, add a new "seq" member to the "nb_config_cb" structure
so that we can preserve the order of the configuration changes as
told by libyang.
Since none of the FRR modules use "ordered-by user" lists so far,
no daemon was affected by this problem.
Reported-by: Martin Winter <mwinter@opensourcerouting.org>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When updating the XPath during the iteration of operational data,
include the namespace of the augmenting module when necessary.
Reported-by: Quentin Young <qlyoung@cumulusnetworks.com>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Adding a lock to protect the global running configuration doesn't
help much since the FRR daemons are not prepared to process
configuration changes in a pthread that is not the main one (a
whole lot of new protections would be necessary to prevent race
conditions).
This means the lock added by commit 83981138 only adds more
complexity for no benefit. Remove it now to simplify the code.
All northbound clients, including the gRPC one, should either run
in the main pthread or use synchronization primitives to process
configuration transactions in the main pthread.
This reverts commit 83981138fe.
This callback can be used to validate subsections of the
configuration being committed before validating the configuration
changes themselves. It's useful to perform more complex validations
that depend on the relationship between multiple nodes.
Only YANG-level validation (performed by libyang) and the
NB_EV_VALIDATE validation (that can be used to validate individual
configuration changes) proved to be insufficient in some cases.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We had wrappers for IPv4 and IPv6 prefixes, but not for IP (version
agnostic) prefixes. This commit addresses this issue.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In preparation to Segment Routing:
- Update the management of Traffic Engineering subTLVs to the new tlvs parser
- Add Router Capability TLV 242 as per RFC 4971 & 7981
- Add Segment Routing subTLVs as per draft-isis-segment-routing-extension-25
Modified files:
- isis_tlvs.h: add new structure to manage TE subTLVs, TLV 242 & SR subTLVs
- isis_tlvs.c: add new functions (pack, copy, free, unpack & print) to process
TE subTLVs, Router Capability TLV and SR subTLVs
- isis_circuit.[c,h] & isis_lsp.[c,h]: update to new subTLVs & TLV processing
- isis_te.[c,h]: remove all old TE structures and managment functions,
and add hook call to set local and remote IP addresses as wellas update TE
parameters
- isis_zebra.[c,h]: add hook call when new interface is up
- isis_mt.[c,h], isis_pdu.c & isis_northbound.c: adjust to new TE subTLVs
- tests/isisd/test_fuzz_isis_tlv_tests.h.gz: adapte fuuz tests to new parser
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
when ever a FRR Client wants to send any data to another node
using MLAG Channel, uses below mechanisam.
1. sends a MLAG Registration to zebra with interested messages that
it is intended to receive from peer.
2. In response to this request, Zebra opens communication channel with
MLAG. and also in Rx. diretion zebra forwards only those messages which
client shown interest during registration
3. when client is no-longer interested in communicating with MLAG, client
posts De-register to Zebra
4. if this is the last client which is interested for MLAG Communication,
zebra closes the channel.
why PIM Needs MLAG Communication
================================
1. In general on LAN Networks elecetd DR will send the Join towards
Multicast RP in case of a LHR and Register in case of FHR.
2. But in case DR Goes down, traffic will be re-converged only after
the New DR is elected, but this can take time based on Hold Timer to
detect the DR down.
3. this can be optimised by using MLAG Mecganisam.
4. and also Traffic can be forwarded more efficiently by knowing the cost
towards RP using MLAG
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
Pthreads were not being deleted from the list after destruction. This
isn't causing any bugs currently but that's just by dumb luck.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
User pass the string match large-community 1 exact-match from CLI.
Now route map lib has got the string as "1 exact-match". It passes the string
to call back for compilation. BGP will parse this string and came to know
that for "1" it has to do exact match. Routemap lib has to save "1" in it’s
dependency table. Here routemap is saving this as a “1 exact-match”
which is wrong. The solution is used the compiled data.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
This new message makes it possible to install/reinstall LSPs with
multiple nexthops using a single ZAPI message.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Add ability to specify the nexthop type;
* Add ability to install or not a FTN (in addition to an LSP).
These two additions will be useful to install local SR Prefix-SIDs
configured with the no-PHP option.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
SR support for IS-IS is coming so we need to be able to distinguish
OSPF and IS-IS LSPs.
While here, add missing case statement for LDP on
lsp_type_from_re_type().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use the route type and instance instead of the route distance
to identify MPLS FTNs. This is a more robust approach since the
routing daemons can modify the distance of their announced routes
via configuration, which can cause inconsistencies.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do this for the following reasons:
* Improve modularity of the code by separating the decoding of the
ZAPI messages from their processing;
* Create an API that is easier to use by the client daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Commit eaf6705d7a fixed a problem caused by configuration changes
coming from the kernel. The fix consisted of regenerating the
candidate configuration before every configuration command (when
using the non-transactional CLI mode). There's no need, however,
to regenerate the candidate when it's identical to the running
configuration. Since the northbound keeps track of the version
of each configuration, we can use that information to prevent
regenerating the candidate configuration when that is not necessary.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
frr_with_mutex(...) { ... } locks and automatically unlocks the listed
mutex(es) when the block is exited. This adds a bit of safety against
forgetting the unlock in error paths & co. and makes the code a slight
bit more readable.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conver these functions:
route_map_add_match
route_map_delete_match
route_map_add_set
route_map_delete_set
To return the `enum rmap_compile_rets` and ensure all functions
that use this code handle all the enumerated possible returns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A couple functions in routemap.c were returning
0/1 that were being mapped into the appropriate
enum values on the calling functions to check return
values. This matches the return values to the actual
enum for future readability.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This implements BMP. There's no fine-grained history here, the non-BMP
preparations are already split out from here so all that remains is BMP
proper.
Signed-off-by: David Lamparter <equinox@diac24.net>
This - mostly intended for BMP - implements a pull-driven write buffer
filled on demand by a callback with some reasonable buffering logic.
I don't expect it to be that useful in other places, but it's not BMP
specific so it's properly split off in its own place.
Signed-off-by: David Lamparter <equinox@diac24.net>
Arm platforms are crashing in our topotests with this callstack;
50 ../sysdeps/unix/sysv/linux/raise.c: No such file or directory.
[Current thread is 1 (Thread 0xffffabb591d0 (LWP 18947))]
(gdb) bt
file=file@entry=0xaaaadfed1e48 "lib/memory.c", line=line@entry=80,
function=function@entry=0xaaaadfed1db8 <__func__.10514> "mt_count_free") at lib/log.c:837
(gdb)
So we are crashing because we are attempting to free a mtype that has no allocations
associated with it.
I added this debug code:
@@ -227,7 +230,9 @@ static void rcu_bump(void)
struct rcu_next *rn;
rn = XMALLOC(MTYPE_RCU_NEXT, sizeof(*rn));
-
+ zlog_debug("RCU_BUMP");
+ mtype_dump(MTYPE_RCU_THREAD);
+ mtype_dump(MTYPE_RCU_NEXT);
/* note: each RCUA_NEXT item corresponds to exactly one seqno bump.
* This means we don't need to communicate which seqno is which
* RCUA_NEXT, since we really don't care.
and added a mtype_dump function:
+void mtype_dump(struct memtype *mt)
+{
+ zlog_debug("%s: %d", mt->name, (int)mt->n_alloc);
+}
Which resulted in this output:
2019/08/28 15:41:11 BGP: RCU_BUMP
2019/08/28 15:41:11 BGP: RCU thread: 3
2019/08/28 15:41:11 BGP: RCU thread: 3
If we look at the defintion of the two static memory types:
DEFINE_MTYPE_STATIC(LIB, RCU_THREAD, "RCU thread")
DEFINE_MTYPE_STATIC(LIB, RCU_NEXT, "RCU sequence barrier")
I would have expected the output to be:
RCU_BUMP
RCU thread: 3
RCU sequence barrier: X
instead.
As a thought experiment I reduced the number of static memory types
to 1 in the file and the crash stopped happening.
I suspect we have a systematic error on arm in lib/memory.h
due to the asm code. I am going to leave that alone for the
moment ( and leave the crash issue open ), but see if we
can get this code change into the system so that our CI
system becomes happy again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FRR community has run into an issue where keeping up our
CI system to work with solaris has become a fairly large burden.
We have also sent emails and asked around and have not found
anyone standing up saying that they are using Solaris.
Given the fact that we do not have any comprehensive testing
being done w/ solaris and the fact that we are getting a steady
stream of new features that will never work on solaris and
we cannot find anyone to say that they are using it. Let's
start the drawn out process of deprecating the code.
If in the mean-time someone comes forward with the fact that
they are using it we can then not deprecate it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
FRR has two implementations of VRF, one backed by netns and the other by
the proper VRF implementation in the Linux kernel. In certain places, the
code assumes that a VRF is netns and so lookups fail. One example of this
is in IPv6 RA code. This causes functionality such as Unnumbered BGP to
fail. To fix this, this patch makes if_lookup_by_index handle the
behavior based on the backend, similar to if_get_by_index. For the two
places in if.c that were calling if_lookup_by_index to be specific to
the VRF, I renamed the existing code, if_lookup_by_ifindex and made it a
static function that is never exposed or called by any routine outside of
if.c.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
This is the second part of commit 8d92004979, which converted
only one of the two calls to inet_aton().
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some other ZAPI decode functions still use void return values and
can't propagate stream errors to their callers. They need to be fixed
as well in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Problem reported that "clear bgp *" only cleared ipv6 peers.
Changed the logic to clear all afi/safis of all peers in
that case. Also improved the operation of clearing
individual afi/safi using soft/in/out to do the right thing.
Ticket: CM-25887
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Sort nexthops before we push them to zebra. This offloads
the nexthop sorting zebra is doing onto the upper level protocols
so that when it gets to zebra and we construct a group, it just has
to append them to the tail for every nexthop.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a tail check to see if we can just put the nexthop
at the end of the already sorted list before iteration.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Debian packaging when run finds a bunch of spelling errors:
I: frr: spelling-error-in-binary usr/bin/vtysh occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bfdd Amount of times Number of times
I: frr: spelling-error-in-binary usr/lib/frr/bgpd occurences occurrences
I: frr: spelling-error-in-binary usr/lib/frr/bgpd recieved received
I: frr: spelling-error-in-binary usr/lib/frr/isisd betweeen between
I: frr: spelling-error-in-binary usr/lib/frr/ospf6d Infomation Information
I: frr: spelling-error-in-binary usr/lib/frr/ospfd missmatch mismatch
I: frr: spelling-error-in-binary usr/lib/frr/pimd bootsrap bootstrap
I: frr: spelling-error-in-binary usr/lib/frr/pimd Unknwon Unknown
I: frr: spelling-error-in-binary usr/lib/frr/zebra Requsted Requested
I: frr: spelling-error-in-binary usr/lib/frr/zebra uknown unknown
I: frr: spelling-error-in-binary usr/lib/x86_64-linux-gnu/frr/libfrr.so.0.0.0 overriden overridden
This commit fixes all of them except the bgp `recieved` issue due to
it being part of json output. That one will need to go through
a deprecation cycle.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `destination` field of the connection structure was used to store
the broadcast address, if the connection was not p2p. This multipurpose
is not very evident and the benefits over calculating the bcast address
on the fly minimal.
Signed-off-by: Juergen Werner <juergen@opensourcerouting.org>
In if_netlink.c, when an interface structure, ifp, is first created,
its possible for the master to come up after the slave interface does.
This means, the slave interface has no way to display the master's ifname
in show outputs. To fix this, we need to allow creation by ifindex instead
of by ifname so that this issue is handled.
Signed-off-by: Dinesh G Dutt<5016467+ddutt@users.noreply.github.com>
The correct cast for these is (unsigned char), because "char" could be
signed and thus have some negative value. isalpha & co. expect an int
arg that is positive, i.e. 0-255. So we need to cast to (unsigned char)
when calling any of these.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The function ipv4_broadcast_addr() does not calculate correct broadcast
addresses for point-to-point connections with prefix 31. RFC3021
section 3.3 [1] specifies:
"The 255.255.255.255 IP broadcast address MUST be used for broadcast
Address Mask Replies in point-to-point links with 31-bit subnet masks"
The issue causes Zebra to print the following warning when IPv4 address
with 31 prefix (e.g. 192.168.222.240/31) is configured on a network
interface:
ZEBRA: [EC 4043309141] warning: interface VNS broadcast addr 255.255.255.255/31 != calculated 192.168.222.241, routing protocols may malfunction
The issue has been originally found in Quagga [2], but it is present also
in FRR.
[1] https://tools.ietf.org/html/rfc3021#section-3.3
[2] https://bugzilla.redhat.com/show_bug.cgi?id=1713449
Signed-off-by: Tomas Hozza <thozza@redhat.com>
Coverity report caught this log mutex being unlocked twice.
Removing the extra one before the goto statement.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
All users of the pqueue_* implementations have been migrated to use
some new data structure (TYPEDSKIP for ospf, HEAP for thread.c).
Remove.
Signed-off-by: David Lamparter <equinox@diac24.net>
Replaces the use of pqueue_* for the thread_master's timer list with an
instance of DECLARE_HEAP_*.
Signed-off-by: David Lamparter <equinox@diac24.net>
The new list api did not implement the `*_del` endpoint as
it was described in the docs here:
http://docs.frrouting.org/projects/dev-guide/en/latest/lists.html#c.Z_del
This patch implements the endpoints to return the object deleted if
found, otherwise NULL for all but the atomic lists.
The atomic list `*_del` code is marked as TODO and will remain undefined
for now.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
seqlock_timedwait() puts an (absolute, CLOCK_MONOTONIC) deadline on how
long we wait. The RCU code uses this for its watchdog implementation.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
State1:
If match cmd returns RMAP_MATCH then, keep existing behaviour.
If routemap type is PERMIT, execute set cmds or call cmds if applicable,
otherwise PERMIT!
Else If routemap type is DENY, we DENYMATCH right away
State2:
If match cmd returns RMAP_NOMATCH, continue on to next route-map. If there
are no other rules or if all the rules return RMAP_NOMATCH, return DENYMATCH
We require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Also, this rule should be applicable for routes with VNI label only, and
not for routes without labels. For example, type 3 and type 4 EVPN routes
do not have labels, so, this match cmd should let them through.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
As a result we have a 3rd state:
State3:
If match cmd returned RMAP_NOOP
Then, proceed to other route-map, otherwise if there are no more
rules or if all the rules return RMAP_NOOP, then, return RMAP_PERMITMATCH.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
when requesting a specific label chunk (e.g. for the SRGB),
it might happen that we cannot get what we want. In this
event, we must be prepared to receive a response with no
label chunk. Without this fix, if the remote label manager
was not able to alloate the chunk we requested, we would
hang indefinitely trying to read data from the stream which
was not there.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
For SRGB, we need to support chunk requests starting at a
specific point in the label space, rather than just asking
for any sufficiently large chunk. To this purpose, we extend
the label manager api to request a chunk with a base value;
if the base is set to 0, the label manager will behave as it
currently does, i.e. fetching the first free chunk big enough
to satisfy the request.
update all the existing calls to get chunks from the label
manager so that they use MPLS_LABEL_BASE_ANY as the base
for the requested chunk
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
in addition to support for tcpflags, it is possible to filter on any
protocol. the filtering can then be based with iptables.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zvni setup in zebra is controlled via bgpd i.e. advertise_all_vni
from bgpd triggers this setup. As a part of zvni creation we may need
to setup BUM mcast SG entries which are propagated to pimd for MDT setup.
Now pimd may not be present at the time of zvni creation or may restart
post zvni creation so we need a mechanism to replay (on pimd startup) and
to cleanup (on pimd stop). This is addressed via zebra_vxlan_sg_replay and
zebra_evpn_pim_cfg_clean_up.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
The callback itself might want to reschedule the resolver, so it is
useful to clear out the callback field before making the call instead of
after.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add the process pids to the output produced by 'show modules'.
At least in a development setting, where there may be multiple
instances of frr running, it can be handy to be able to id
the exact pids, for debugging e.g.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When using the LYD_PATH_OPT_NOPARENTRET flag, lyd_new_path() returns
the path-referenced node instead of the first created node. This
flag wasn't available in libyang 0.16-r1 so we couldn't use it
before. Use it now to simplify the code where possible.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
libyang-0.16-r3 contains a commit[1] that changed the autodelete
behavior of subtrees when validating data. A few FRR commands were
affected by this change since they relied on the old autodelete
behavior.
To fix these commands, use the LYD_OPT_WHENAUTODEL flag when
validating data to restore the old autodelete behavior (which adds
a lot of convenience for us).
[1] https://github.com/CESNET/libyang/commit/bbc43b1b4
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add a file that exposes functions which modify nexthop groups.
Nexthop groups are techincally immutable but there are a
few special cases where we need direct access to add/remove
nexthops after the group has been made. This file provides a
way to expose those functions in a way that makes it clear
this is a private/hidden api.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add a nexthop_dup() api that both allocates and copies
a new nexthop from an old one. Still retain the old exposed
function nexthop_copy() so we can copy without allocation.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add nexthop_group_copy and nexthop_group_add_sorted functions.
nexthop_group_copy -> Copy src nexthop_group into dst nexthop_group
nexthop_group_add_sorted -> Adds a new nexthop to the nexthop group
in a sorted manner.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Our command matcher doesn't handle {[...]} correctly; let's warn about
it so the DEFUN can be changed to [{...}] (which does work as expected.)
Fixes: #4594
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Make the function parameter `const` so the analyzer doesn't suspect we
are trying to change its value.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Some more complex CLI usages will require northbound to support
signalizing a custom configuration node end.
For an example:
```
router bgp 100
bgp router-id 10.254.254.1
neighbor 10.0.0.100 remote-as 200
!
address-family ipv4 unicast
network 10.0.1.0/24
network 10.0.2.0/24
network 10.0.3.0/24
exit-address-family
!
address-family ipv6 unicast
neighbor 10.0.0.100 activate
exit-address-family
!
```
This commit implements a new callback called `cli_show_end` which
complements `cli_show` and is only called at the end of processing the
yang configuration node. It will be used to write the configuration
node termination like: "!" or "exit-address-family".
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
The "static struct mtype * const MTYPE_FOO" doesn't quite make a
"constant" that is usable for initializers. An 1-element array works
better.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When running `show run` of route-maps the order is basically
the order read in some fashion. Convert the display to
always be the alphabetically sorted order.
Suggested-by: Manuel Schweizer <manuel@cloudscale.ch>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This will allow the end-user to clear the counters associated
with the route-map. Subsuquent `show route-map ..` commands
will display counters since the last clear.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a prefix-list is applied to a BGP neighbor to deny the learning
of specific routes, the hit count is showing 0 for BGP even though
the routes are being filtered correctly due
to the configured prefix-list.
Before fix:
c1# show ip prefix-list nag seq 10
ZEBRA: seq 10 permit any (hit count: 0, refcount: 0)
BGP: seq 10 permit any (hit count: 0, refcount: 0)
c1# show ip prefix-list nag seq 5
ZEBRA: seq 5 deny 1.0.1.0/24 (hit count: 0, refcount: 0)
BGP: seq 5 deny 1.0.1.0/24 (hit count: 0, refcount: 0)
Fix: Increment the prefix-list's hit count whenever a rule match occurs.
After Fix:
c1# show ip prefix-list nag seq 10
ZEBRA: seq 10 permit any (hit count: 0, refcount: 0)
BGP: seq 10 permit any (hit count: 6, refcount: 0)
c1# show ip prefix-list nag seq 5
ZEBRA: seq 5 deny 1.0.1.0/24 (hit count: 0, refcount: 0)
BGP: seq 5 deny 1.0.1.0/24 (hit count: 1, refcount: 0)
Signed-off-by: Visakha Erina visakha.erina@broadcom.com
Adding a read with the address of the thread pointer we want to
use will allow lib/thread.c to properly handle your thread pointers.
Instead we were setting the pointer to NULL before we passed
into the _read and _write thread functions. Remove the NULL
pointer set and just let thread.c handle everything.
vty_stdio_resume and vty_read would blindly add read and write
which would cause vty_event() to drop the thread pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use %% style for errors in log commands and switch
tabs to a single space in output. Also, remove un-needed
output for success.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add vrrpd and sharpd to the DAEMONS_* list so they
can be dispatched daemons independent commands
such as `show work-queues` and `log-filter`.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
As logging functions are called, if filters are stored,
look for the filter substring in the logs. If it is not
found, do not output the log to a file or stdout.
If the filter is matched, handle the log call per usual.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add vtysh commands to add/del/clear/show filters across
all daemons and independently on each one. Add automake and
clippy boilerplate for those commands as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Simplify the code in deleting a filter by using memmove rather
than iterating. Memmove handles overlapping strings safely so
this is fine here.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add code for manipulation/creation of log filters
and their table. Specifically, add lookup,clear,add,del,dump
functionality.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
When displaying `show thread poll` data add the
function we are supposed to call when the poll
event happens.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When adding a read/write poll event and we are using a developmental
build add a bit of code to ensure that we do not already have an read
or write event scheduled.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If we have a case where have created a fd for i/o and we have
removed the handling thread but still have the fd in the poll
data structure, there existed a case where we would get
the handle this fd return from poll but we would immediately
do nothing with it because we didn't have a thread to hand
the event to.
This leads to an infinite loop. Prevent the infinite loop
from happening and log the problem.
We still need to find the cause of this happening. But
let's prevent the system from melting down in the mean time.
Fixes: #2796
Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is mostly relevant for Solaris, where config.h sets up some #define
that affect overall header behaviour, so it needs to be before anything
else.
Signed-off-by: David Lamparter <equinox@diac24.net>
For some reason, the compiler on OpenBSD on our CI boxes doesn't like
struct initializers with ".a.b = x, .a.c = y", generating a warning
about overwritten initializers...
Signed-off-by: David Lamparter <equinox@diac24.net>
We need to be calling snprintfrr() instead of snprintf() in places that
wrap snprintf in some user-exposed way; otherwise the extensions won't
be available for those functions.
Signed-off-by: David Lamparter <equinox@diac24.net>
clippy can't process #ifdef or similar bits inside of an argument list
(e.g. within the braces of a DEFUN or DEFPY statement.) Improve error
reporting to catch these cases instead of generating broken C code.
Fixes: #3840
Signed-off-by: David Lamparter <equinox@diac24.net>
* adds a `--with-clippy=...` option to use a prebuilt clippy binary
* limits the autoconf tests done for `--enable-clippy-only`
(e.g. no libyang)
Fixes: #3921Fixes: #4006
Signed-off-by: David Lamparter <equinox@diac24.net>
Even when using the classic CLI mode (i.e. when --tcli is not
used), the northbound code still uses vty->candidate_config
to perform configuration changes. From the perspective of the
user, the running configuration is being edited directly, but
under the hood the northbound layer does a full configuration
transaction for each command. When the running configuration is
edited by a northbound client other than the CLI (e.g. kernel,
gRPC), vty->candidate_config might become outdated, and this can
lead to lots of weird problems. To fix this, always regenerate
vty->candidate_config before each configuration command when
using the classic CLI mode. When using the transactional CLI,
the user needs to update the candidate manually using the "update"
command, otherwise the "commit" command will fail with this error:
"% Candidate configuration needs to be updated before commit".
Fixes some problems reported by Don after moving an interface from
one VRF to another one while zebra is running.
Reported-by: Don Slice <dslice@cumulusnetworks.com>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf_id parameter is replaced with struct vrf * parameter. It is
needed to create vrf structure before entering in the fuction.
an error is generated in case the vrf parameter is missing.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
there may be cases where the vrf is yet allocated from the vty, and the
discovery process did not make the relationship between the vrf_id and
the name of the vrf. For instance, by parsing an interface belonging to
vrf-id X, it is not sure that vrf-id X and vrfname XX are talking about
the same vrf. For that, lets allocate the vrf, and lets try to detect
there is a duplicate case in vrf, so that the merge can be done without
any impact for the user.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the interface search is based on vrfs. As at startup, some interfaces
may be configured, there is need to have vrfs contexts present. A macro
is being appended with an extra parameter that permits create a vrf and
return the context. This macro is also used by some show routines, but
will not create vrfs, because that extra parameter will be set to false,
on that case.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Upon accessing interface NB API, the interface is created, if the vrf
is available. the commit does not change the behaviour, since at this
commit, this is not yet possible to have vrf contexts, while zebra did
not connect to daemons. However, that commit adds some work, so that it
will be possible to work on a vrf context, without having the vrf_id
completely resolved. for instance, if we suppose a vrf is created by
command 'vrf TOTO' in the starting configuration of a daemon, then 'interface
TITI vrf TOTO' will permit to create interface TITI within vrf TOTO.
the macro VRF_GET_INSTANCE will return the vrf context, if available or
not.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Added a CLI "debug route-map" to enble route-map debugs
Added debugs for following triggers
1. Add/delete a route-map
2. Add/delete a sequence in route-map
3. Add/delete a match statement(dependency)
4. Update a dependency
5. Apply a route-map
Signed-off-by: Ameya Dharkar <adharkar@vmware.com>
This version of container_of() should work on C++, by ditching the
unavailable builtins (at the cost of no longer checking for "const"
violations.)
Signed-off-by: David Lamparter <equinox@diac24.net>
vrf pointer is used as reference when calling if_get_by_name() function.
this will permit to create interfaces with an unknown vrf_id, since it
is only necessary to get the vrf structure to store the interfaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
On some compiler platforms the md5 setup function was
not returning anything. Place failure case on the bottom
to properly handle this situation.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Various compilers in our CI system were complaining about various
auto-conversions. Let's get these cleaned up a bit more.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When the user specifies -N namespace allow it to influence the
frr_vtydir(DAEMON_VTY_DIR) to have namespace in it's path
like so: $frrstate_dir/<namespace>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When using -z, allow that to override the zapi domain socket
path. If using -N add the namespace name to the path to
$frr_statedir/<namespace>/zserv.api. If you don't specify
the -N or -z option then it is $frr_statedir/zserv.api
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
reallocarray() is walled behind stupid feature macros on various
platforms and doesn't quite gain us much in that particular use case.
Signed-off-by: David Lamparter <equinox@diac24.net>
This makes printfrr extensions available in most of our format strings.
snprintf() is the obvious exception.
Signed-off-by: David Lamparter <equinox@diac24.net>
[u]int64_t is the only type in the intX_t family that needs
special-casing for printf since the calling convention may differ
between 32-bit and 64-bit systems.
Adding the L specifier allows us to eschew the gnarly-looking PRIu64.
Signed-off-by: David Lamparter <equinox@diac24.net>
The get_route_map_delete_event function should return a value
even if we never get to that part of the function. Make sure
we know why we are here so it can be fixed appropriately in
the future.
Signed-off-by: Donald Sharp <sharpd@cumulusnetwork.com>
The zebra_size_t type needs to be owned by zclient.h since
it is part of the zapi protocol. Move it to where the
structure belongs.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
zebra.h had some defined flags that were being used
as part of the route encode/decode functionality. These
belong in the zclient.h code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We have some functions that are owned by log.c, so
move their declarations from zebra.h to log.h
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The iana_afi_t and iana_safi_t were being created in zebra.h
and zebra.h is a bit of a dumping ground. When the iana_afi2str and
iana_safi2str functions were created, it was correctly pointed out
that we should just use the internal afi_t and safi_t 2str functions
but to do that we would need to include prefix.h in zebra.h. Which
really is not the right thing to do. This tells us that we need
to break out this code into it's own header.
Move to iana_afi.h the enums and specific functions and remove
from zebra. Convert to using the afi2str and safi2str functions.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Modify the code such that we can auto turn the iana values of afi
and safi to pleasant to read strings.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Although the RFC states hostname length should be < 255 chars,
FRR allows infinite length technically. However, when you try
to set a hostname > 80 chars, you would immediately notice a crash.
RCA: Crash due to buffer overflow. Large buffer sprintf'd into smaller
buffer. Usage of sprintf function instead of snprintf which is safer.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Say, more than one sequence of a route-map uses the same named entity
in its match clause. After that entity is removed from any one of the
route-map sequences, any further changes made to that entity doesn't
dynamically take effect.
A reference counter, that allows the named entity to keep a count of
the route-maps dependent on it, has been introduced to address this issue.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
When you have compiled FRR with a large multipath number
then encoding large ecmp routes between zebra and the
routing daemons. There exists a theoritical size
of multipath that will cause the encoding to be larger
than the ZEBRA_MAX_PACKET_SIZ. In the cases where
we have allocated streams that will encode routes
then let's ensure that whatever size we have will
auto-fit what we say we can send.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add 'no log commands' cli and at the same time add a
--command-log-always to the daemon startup cli.
If --command-log-always is specified then all commands are
auto-logged and the 'no log commands' form of the command
is now ignored.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
gcc is complaing about this with --enable-dev and --enable-werror:
In function 'nb_log_callback',
inlined from 'nb_transaction_apply_finish' at lib/northbound.c:1106:4:
lib/northbound.c:777:2: error: '%s' directive argument is null [-Werror=format-overflow=]
777 | zlog_debug(
| ^~~~~~~~~~~
778 | "northbound callback: event [%s] op [%s] xpath [%s] value [%s]",
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
779 | nb_event_name(event), nb_operation_name(operation), xpath,
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
780 | value);
| ~~~~~~
CC lib/ringbuf.lo
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The vtypath_default variable had a possibility of being overwritten
due to size constraints. This fixes this issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
Action: Apply route-map match and return the result (RMAP_MATCH/RMAP_NOMATCH)
State1: Receveived RMAP_MATCH
THEN: If Routemap type is PERMIT, execute other rules if applicable,
otherwise we PERMIT!
Else: If Routemap type is DENY, we DENYMATCH right away
State2: Received RMAP_NOMATCH, continue on to next route-map, otherwise,
return DENYMATCH by default if nothing matched.
With reference to PR 4078 (https://github.com/FRRouting/frr/pull/4078),
we require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP (or another enum) to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
Question: Do we repurpose an existing enum RMAP_OKAY or RMAP_ERROR
as the 3rd state (or create a new enum like RMAP_NOOP)?
RMAP_OKAY and RMAP_ERROR are used to return the result of set cmd.
We chose to go with RMAP_NOOP (but open to ideas),
as a way to bypass the rmap filter
As a result we have a 3rd state:
State3: Received RMAP_NOOP
Then, proceed to other route-map, otherwise return RMAP_PERMITMATCH by default.
Signed-off-by:Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Separate out the debug_init api to have 2 functions:
1) Function to register a callback
2) Function to initiate the cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow multiple callers to initialize themselves to receive
callbacks for debug on/off operations.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SO_MARK socket option was being used pre vrf to allow for the
separation of the front panel -vs- the management port. This
was facilitated by a ip rule. Since this is undocumented anywhere
in our system( other than old commits see
ed40466af8 ). We should remove this
because this will cause interference with people using rules
and are not aware of this offshoot of functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Upon startup FRR reads in the MAX_FDS variable from
it's control files via the getrlimit call. We then
setup code to limit the poll data structure size to
that value. The OS also limits our FD's to that value
because that is what is set. Provide a methodology
that a interested end user can figure this data out.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'show thread cpu' command referenced a 'b' option. Which
is not parsed at all in the parse_filter function. As such
I do not know what this was referencing as that it has been
removed. Update the help strings to reflect this reality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Change 'begins_with' to 'frrstr_startswith' for consistency
* Add suffix checker, frrstr_endswith()
* Update vtysh to use the new function
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Allow label ignoring when comparing nexthops. Specifically,
add another functon nexthop_same_no_labels() that shares
a path with nexthop_same() but doesn't check labels.
rib_delete() needs to ignore labels in this case.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Refactor the gatway and source nexthop comparision into a
common code path that compares them explicitly based on
their address family.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The functions nexthop_same() does not check the resolved
nexthops so I don't think this function is even needed
anymore.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
This is necessary to avoid a name collision with std::for_each
from C++.
Fixes the compilation of the gRPC northbound module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Passing the struct route_table *ptr as const doesn't really help; if
anything it semantically would imply that the returned route_node is
const too since constness should propagate (but it doesn't in C.)
The right thing to do here - which actually helps the compiler optimize
the code too - is to tag functions with __attribute__((pure)). The
compiler does this automatically if it has the function body (and the
body of all called functions) available. That should cover most "static
inline" functions in headers, as well as functions in the same file.
However, this doesn't work (at least without LTO) for extern functions.
Hence, add "ext_pure" for this case. (Built-in "extern" to make lines
shorter.)
Signed-off-by: David Lamparter <equinox@diac24.net>
Working with a proper struct route_node gets us around a bunch of weird
casts here and makes the code slightly more robust.
Signed-off-by: David Lamparter <equinox@diac24.net>
Only noticed this when trying to add atomlists to the typesafe
datastructure tests... the atomic-specific test_atomlist doesn't use
init/fini :/
Signed-off-by: David Lamparter <equinox@diac24.net>
This is an 8-ary heap (cacheline optimized.) It works as a semi-sorted
kind of middle ground between unsorted and sorted datastructures; pop()
always returns the lowest item but ordering is only loosely enforced.
Signed-off-by: David Lamparter <equinox@diac24.net>
Turns out we need one of these. Same API as DECLARE_LIST, but deleting
random items is much faster.
Signed-off-by: David Lamparter <equinox@diac24.net>
The skiplist code was previously falling back to the del() code path for
a pop() on a skiplist. This is unneeded complexity, a pop() can be done
more efficiently.
Signed-off-by: David Lamparter <equinox@diac24.net>
VRRP doesn't install any routes, but should still have an array entry.
Also add a help string for VRRP to route_types.txt
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add convenience functions to compute the Internet checksum of a data
block, including a pseudoheader.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Search for macvlan interfaces with the appropriate name and MAC
address when starting up a new VRRP instance
* Split VRRP socket into two; one for Tx, one for Rx
* Bind Tx socket to the macvlan subinterface so our VRRP advertisements
go out with the correct MAC address
* Send ARP requests from this macvlan subinterface
* Improve error messaging
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Compiling FRR w/ gcc 9.1 and --enable-werror generates some
issues that need to be cleaned up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. listnode_add_sort_nodup - This API adds to list only if no duplicate
element available in the list. returns true/false
2. list_filter_out_nodes - This API deletes the nodes which satisfy the given
condition. condition is passed as a func ptr in
API. This function takes in node data(void ptr).
Signed-off-by: Saravanan K <saravanank@vmware.com>
It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Add an upspecified option to the AFI enum and update
switch statements using it in bgpd and pbrd.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
new vty command is added:
neighbor XXX bfd check-control-plane-failure
this command will enforce the check of bgp controlplane, when bfd
detects changes in the dataplane.
- at configuration, the cbit will be set if that command is executed
- at flapping time, if the command is configured and remote cbit is set
accordingly, then the bfd event will be ignored.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
bfd cbit is a value carried out in bfd messages, that permit to keep or
not, the independence between control plane and dataplane. In other
words, while most of the cases plan to flush entries, when bfd goes
down, there are some cases where that bfd event should be ignored. this
is the case with non stop forwarding mechanisms where entries may be
kept. this is the case for BGP, when graceful restart capability is
used. If BFD event down happens, and bgp is in graceful restart mode, it
is wished to ignore the BFD event while waiting for the remote router to
restart.
The changes take into account the following:
- add a config flag across zebra layer so that daemon can set or not the
cbit capability.
- ability for daemons to read the remote bfd capability associated to a bfd
notification.
- in bfdd, according to the value, the cbit value is set
- in bfdd, the received value is retrived and stored in the bfd session
context.
- by default, the local cbit announced to remote is set to 1 while
preservation of the local path is not set.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A few of the functions in openbsd's RB tree implementation
needed to have const in their parameters.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The CLI grammer sandbox needs to initialize the northbound subsystem
otherwise the running_config global variable won't be set, which
leads to crashes.
Fixes#4319.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The route_map_event_hook callback was passing the `route_map_event_t`
to each individual interested party. No-one is ever using this data
so let's cut to the chase a bit and remove the pass through of data.
This is considered ok in that the routemap.c code came this way
originally and after 15+ years no-one is using this functionality.
Nor do I see any `easy` way to do anything useful with this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
From looking at a current PR: #4297, we see that routemap.c code
was not properly updating dependency information for some
route_map_event_t enum types. This has lead to dependancy
information not being updated properly. While at this time
I do not know whether or not we need to update the switch
for the missing types, I do know that if we add something in
the future we should make the person adding the code consider
this. So let's remove all `default:` switch statement handlers
from routemap.c when switching on an enum. Future time will
need to be spent to figure out what is needed to be done here.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Each of Lua's major versions are incompatible with each other. Ubuntu,
at least, does not provide a single liblua.so or /usr/include/lua; all
SOs and headers are versioned, e.g. liblua5.3.so and
/usr/include/lua5.3. There's already an m4 macro in the GNU collection
to handle this situation, so let's use that.
This allows building with Lua enabled to work on platforms other than
Fedora.
* Move lib/lua.[ch] -> lib/frrlua.[ch] to prevent path conflicts
* Fix configure.ac search for proper CPP and linker flags
* Add Lua include path to AM_CPPFLAGS
* Update vtysh/extract.pl.in
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This fix aims to reduce the load on BGPD when certain
exisiting configurations are replayed.
Specifically, the fix prevents BGPD from processing
routes when the following already existing configurations
are replayed:
1) A match criteria is configured within a route-map.
2) When "call" is invoked within a route-map.
3) When a route-map is tied to a BGP neighbor.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Route map library creates a hash table to save the dependency binding.
route-map LRM permit 1
call rLRM
Whenever there is change in child routemap(rLRM), it tries to
find the dependency mapping with the child route map MATCH event
and it fails.The handing of match add and match delete was missing
to get the correct dependency,here it's LRM.
This fix would correct the flow to get the correct dependency.
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
vrf_id parameter is added to the api of bfd_client_sendmsg().
this permits being registered to bfd from a separate vrf.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
This is an extension to previous behavior, where the bind() operation
was performed only when vrf was not a netns backend kind. This was done
like that because usually the bind parameter is the vrf name itself, and
having an interface name with vrf name is an expectation so that the
bind operation works.
the bind() operation can be performed on whatever device provided that
that name is not null and there is an interface in the vrf that has the
same name as the parameter.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
libyang 1.0 introduced a few changes in the user types API, and
these changes made FRR incompatible with libyang 1.x. In order to
ease our migration from libyang 0.x to libyang 1.x, let's disable
our libyang custom user types temporarily so that FRR can work
with both libyang 0.x and libyang 1.x. This should be especially
helpful to the CI systems during the transition. Once the migration
to libyang 1.x is complete, this commit will be reverted.
Disabling our libyang custom user types should have only
minimal performance implications when processing configuration
transactions. The user types infrastructure should be more important
in the future to perform canonization of YANG data values when
necessary.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The vrf_with_default_name vrf variable is set to NULL
and then tested to see if it is valid. Removing the
dead code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This converts the new table code to use the new hash
type provided by David.
The following test is 1 million routes installed and how
much memory we are using:
Old mem usage:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 574 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 536 MiB
Free small blocks: 33 MiB
Free ordinary blocks: 4600 KiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
New Memory usage:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 542 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 506 MiB
Free small blocks: 3374 KiB
Free ordinary blocks: 33 MiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We should not be modifying the pointer for the prefix_hash_key
function, make it a const so that we can use it elsewhere.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The head of a list should not change for find functions. Probably
are others that should be considered but these changes can come
in as needed I believe.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This converts the new table code to use the new hash
type provided by David.
The following test is 1 million routes installed and how
much memory we are using:
Old mem usage:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 574 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 536 MiB
Free small blocks: 33 MiB
Free ordinary blocks: 4600 KiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
New Memory usage:
Memory statistics for zebra:
System allocator statistics:
Total heap allocated: 542 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 506 MiB
Free small blocks: 3374 KiB
Free ordinary blocks: 33 MiB
Ordinary blocks: 0
Small blocks: 0
Holding blocks: 0
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
We should not be modifying the pointer for the prefix_hash_key
function, make it a const so that we can use it elsewhere.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The head of a list should not change for find functions. Probably
are others that should be considered but these changes can come
in as needed I believe.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Replaces the use of pqueue_* for the thread_master's timer list with an
instance of DECLARE_SKIPLIST_*.
Signed-off-by: David Lamparter <equinox@diac24.net>
Replaces the open-coded thread_list with a DECLARE_LIST instantiation.
Some function prototypes are actually identical to what was previously
open-coded.
Signed-off-by: David Lamparter <equinox@diac24.net>
These two are lock-free linked list implementations, the plain one is
primarily intended for queues while the sorted one is for general data
storage.
Signed-off-by: David Lamparter <equinox@diac24.net>
Typesafe red-black tree, built out of the OpenBSD implementation and the
macro soup layered on top. API compatible with skiplists & simple
lists.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
By the power of the C preprocessor, these macros provide type-safe
warppers for simple lists, skiplists and hash tables. Also, by changing
the instantiation macro, it is easily possible to switch between
algorithms; the code itself does not need to be changed since the API
is identical across all algorithms.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The upcoming gRPC-based northbound plugin will run on a separate
pthread, and it will need to have access to the running configuration
global variable. Introduce a rw-lock to control concurrent access
to the running configuration. Add the lock inside the "nb_config"
structure so that it can be used to protect candidate configurations
as well (this might be necessary depending on the threading scheme
of future northbound plugins).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The ability to lock the running configuration to prevent other users
from changing it is a very important one. We already supported
the "configure exclusive" command but the lock was applied to
the CLI users only (other clients like ConfD could still commit
configuration transactions, ignoring the CLI lock). This commit
introduces a global lock for the running configuration that is
shared by all northbound clients, and provides a public API to
manipulate it. This way other northbound clients will also be able
to lock/unlock the running configuration if required (the upcoming
gRPC northbound plugin will have RPCs for that).
NOTE: this is a management-level lock for the running configuration,
not to be confused with low-level locks used to avoid data races.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Prevent IPv6 routes received via a ibgp session with one of its own interface
ip as nexthop from getting installed in the BGP table.
Implemented IPV6 HASH table, where we need to add any ipv6 address as they
gets configured and delete them from the HASH table as the ipv6 addresses
get unconfigured. The above hash table is used to verify if any route learned
via BGP has nexthop which is equal to one of its its connected ipv6 interface.
Signed-off-by: Biswajit Sadhu sadhub@vmware.com
Fixup in response to Jafar's review comments.
This is actually old code moved in from pimd to lib. But the fixup does
make sense.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
These updates act as triggers to pimd to -
1. join the MDT for rxing VxLAN encapsulated BUM traffic
2. register the local-vtep-ip as a source for the MDT
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
IMET route is optional if the flood mode is PIM-SM and serves
no functional purpose. So this change limits type-3 route generation
to flood-mode=head-end-replication.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
This solves a crash that happens if the "route-map" command is used
after "router rip" + "no router rip" + "router rip".
Once interface route-maps are converted to the new northbound model,
we'll be able to remove the if_rmap_ctx_list global list (which is
an ugly hack to make things work right now).
Bug found by the CLI fuzzer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Found that zebra_rnh_apply_nht_rmap would set the
NEXTHOP_FLAG_ACTIVE if not blocked by the route-map, even
if the flag was not active prior to the check. This fix
changes the flag used to denote the nexthop is filtered so
that proper active state can be retained. Additionally,
found two cases where we would send invalid nexthops via
send_client, which would also cause this crash. All three
fixed in this commit.
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The NEXTHOP_FLAG_FILTERED went away when we started treating
static routes like every other route in the system. This was
a special case for handling static route code that just didn't
get finished cleaning up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Certain operations, like removing non-presence containers or
modifying list keys, are not considered to be valid from the
perspective of the northbound layer. This is because we want to
implement a minimum set of northbound configuration callbacks and
use them to process all possible configuration changes.
The removal of a np-container [1], for example, can be processed by
calling the "delete" callback of all of its child nodes (recursion
is used for np-container child nodes). Similarly, the modification
of a list key can be processed as if the corresponding list entry
was removed and readded with updated key values. This strategy saves
us the burden of implementing lots of extra configuration callbacks.
That said, the nb_operation_is_valid() function shouldn't be used
for anything other than checking which callbacks are valid for
which YANG nodes. Using it in the nb_candidate_edit() function
is inappropriate as we want as much flexibility as possible when
editing a candidate configuration. We should allow CLI commands,
for example, to remove np-containers (the northbound layer will then
figure out which callbacks need to be called when this candidate
is committed). Remove the check.
[1] We can't do the same for presence containers since they have a
"create" callback associated with them.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
flog() is a small wrapper around zlog() that can be useful in a
few places to reduce code duplication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
zlog() should be part of the public logging API as it's useful in
the cases where the logging priority isn't known at compile time
(i.e. it depends on a variable).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Move call to nb_db_init() from nb_init() to frr_init() so that only
the FRR daemons will initialize the northbound database. This should
fix a few warnings when running some unit tests.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Introduce a hash table to keep track of user pointers associated
to configuration entries. The previous strategy was to embed
the user pointers inside libyang data nodes, but this solution
incurred a substantial performance overhead. The user pointers
embedded in candidate configurations could be lost while the
configuration was being edited, so they needed to be regenerated
before the candidate could be committed. This was done by the
nb_candidate_restore_priv_pointers() function, which was extremely
expensive for large configurations. The new hash table solves this
performance problem.
The yang_dnode_[gs]et_entry() functions were renamed and moved from
yang.[ch] to northbound.[ch], which is a more appropriate place
for them. This patch also introduces the nb_running_unset_entry()
function, the counterpart of nb_running_set_entry() (unsetting
user pointers was done automatically before, now it needs to be
done manually).
As a consequence of these changes, we shouldn't need support for
libyang private pointers anymore (-DENABLE_LYD_PRIV=ON). But it's
probably a good idea to keep requiring this feature as we might
need it in the future for other things (e.g. disable configuration
settings without removing them).
Fixes#4136.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Manually tested rather extensively in addition to included unit tests,
should work as intended.
NB: The OpenBSD futex() code is "future"; it's not actually in OpenBSD
(yet?) and thus untested.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
After exceeding the max retry number for a thread,
we were passing the data rather than the work_queue_item
struct.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
MD5 auth on TCP is supported for prefixes in recent versions of Linux;
add complementary support for FRR.
This is a reworked version of Donald's commit to keep library
compatibility and obviate the need for changes in daemons that don't
need to support this themselves.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Split the "debug northbound" command into the following commands:
* debug northbound callbacks configuration
* debug northbound callbacks state
* debug northbound callbacks rpc
* debug northbound notifications
* debug northbound events
* debug northbound client confd
* debug northbound client sysrepo
If "debug northbound" is entered alone, all of its suboptions
are enabled.
This commit also adds code to debug state/rpc callbacks and
notifications (only configuration callbacks were logged before).
Use the debugging infrastructure from "lib/debug.h" in order to
benefit from its facilities (e.g. MT-safe debugging) and avoid
code duplication.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The IFF_OUT_LOG macro is using BUFSIZE, which is the sizeof(logbuf)
but for some reason 8.0 clang SA is not happy with it. Just
make it happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a hash function to turn a nexthop group into a
32 bit unsigned hash key with jhash. We do not care to
hash any recursively resolved nexthops, just the group.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Avoid tracking 0.0.0.0/32 nexthop with RIB.
When routes are aggregated,
the originate of the route becomes self.
Do not track nexthop self (0.0.0.0) with rib.
Ticket: CM-24248
Testing Done:
Before fix-
tor-11# show ip nht vrf all
VRF blue:
0.0.0.0
unresolved
Client list: bgp(fd 16)
VRF default:
VRF green:
VRF magenta:
0.0.0.0
unresolved
Client list: bgp(fd 16)
After fix-
tor-11# show ip nht vrf all
VRF blue:
VRF default:
VRF green:
VRF magenta:
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Adjust the nexthop comparison api so that it calls the label-
comparison api. Adjust the label-comp api so that "no labels"
is "equal".
Signed-off-by: Mark Stapp <mjs@voltanet.io>
PR #3622 renamed the "delete" northbound callback to "destroy" in
order to make the libfrr headers compatible with C++. This commit
renames a few functions that still use "delete" instead of "destroy"
in their names.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Merge commit to solve a bunch of conflicts with other PRs that were
merged in the previous weeks.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
that routine does the same as listnode_add; in addition it creates the
linked list if needed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
lists passed as parameter that are null, are accepted by the function.
I would even propose to silently return NULL in official
listnode_lookup() routine.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Problem found in bgpd where it wasn't learning interface address
information at startup due to the interface information becoming
available before the bgp instance was created. This issue was
caused by an earlier change that tried to make the interface
information discovery process more efficient but left this hole
for bgpd. For now, putting back in the previous method of
gathering interface info via the zclient_send_reg_requests call
and will revisit a more efficient way to get the info in the future.
Ticket: CM-23932
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add a few missing log entries to the macro to allow us to print
out the zapi message type, since they were missing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Use the privs struct mutex more strictly, to ensure that the
privs are at the level the caller expects when the apis
return.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Privs escalation is process-wide, and a multi-threaded process
can deadlock. This adds a mutex and a counter to the privs
object, preventing multiple threads from making the privs
escalation system call.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Non-presence containers don't have "destroy" callbacks. So, once
a np-container is deleted, we need to call the "destroy" callbacks
of its child nodes instead.
This commit doesn't fix any real problem as of now since all
np-containers from the FRR YANG modules contain or one more mandatory
child nodes, so they can't be deleted (libyang will add missing
np-containers when validating data). Nevertheless, upcoming YANG
modules should benefit from this change.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is just a small refactoring to reduce code duplication. No
behavior changes intended.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In the case of EVPN symmetric routing, the tenant VRF is associated with
a VNI that is used for routing and commonly referred to as the L3 VNI or
VRF VNI. Corresponding to this VNI is a VLAN and its associated L3 (IP)
interface (SVI). Overlay next hops (i.e., next hops for routes in the
tenant VRF) are reachable over this interface. Howver, in the model that
is supported in the implementation and commonly deployed, there is no
explicit Overlay IP address associated with the next hop in the tenant
VRF; the underlay IP is used if (since) the forwarding plane requires
a next hop IP. Therefore, the next hop has to be explicit flagged as
onlink to cause any next hop reachability checks in the forwarding plane
to be skipped.
https://tools.ietf.org/html/draft-ietf-bess-evpn-prefix-advertisement
section 4.4 provides additional description of the above constructs.
Use existing mechanism to specify the nexthops as onlink when installing
these routes from bgpd to zebra and get rid of a special flag that was
introduced for EVPN-sourced routes. Also, use the onlink flag during next
hop validation in zebra and eliminate other special checks.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
After creating a libyang context, we need to hook up our callback to use
embedded built-in modules. I hadn't added this to the yang translator
code.
Also, ly_ctx_new fails if the search directory doesn't exist. Since
that's not a hard error for us, work around that and ignore inaccessible
YANG_MODELS_DIR. (This is needed for snap packages.)
Signed-off-by: David Lamparter <equinox@diac24.net>
an interface rmap context can be created from a custom name string,
instead of a vrf. This ability permits to handle several instances of
interface route map in the same vrf. The naming convention will be
transparent on what the name is for in the daemon code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
so as to handle ri/ripng/eigrp multiple instances, the need is to
encapsulate if_rmap hash table into a container context self to each
instance. This work then reviews the if_rmap api, mainly by adding a
if_rmap_ctx context, that is passed for each exchange between library
and the daemon.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When displaying the running configuration, we should use a single
space to indent commands when necessary (and not two spaces).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This patch adds support to nexthops of type NEXTHOP_TYPE_IFINDEX to
nexthop-groups. This should be especially useful when dealing with
p2p interfaces like tunnels that don't have IP addresses assigned
to them.
NOTE: nh->addr can be NULL now, so we should always perform a null
check before dereferencing this pointer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use a pointer to a sockunion instead of a full sockunion in the
nexthop_hold structure. This prepares the ground for the next commit,
which will make nexthop addresses optional (in this commit we assume
nh->addr will never be NULL, but this will change).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* command_graph.h: stop using "new" as a parameter name as that's a
reserved C++ keyword.
* module.h: avoid using C99 designated initializers since C++ doesn't
support them. This change hurts code readability quite considerably,
so we should try to find a better solution later.
* pw.h: remove unneeded empty structure to silence a C++ warning.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
C++ doesn't support implicit casts from void pointers like C
does. And the libfrr headers have some bits of code that rely on
implicit casts in order to work. To solve this problem, add a new
"static_cast" macro that performs explicit static casts when a C++
compiler is being used, or do nothing otherwise.
NOTE: since macros are only evaluated when they are used, there
might be other macros from libfrr that will need to use "static_cast"
as well. If a header is successfully compiled using a C++ compiler,
there's no guarantee that its macros are compatible with C++. We'll
only know about such macros when they are used by C++ code, then
we'll need to adapt them one by one in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Two different definitions of "enum filter_type" exist in libfrr:
one in lib/filter.h and other in lib/command_match.h. Rename one
of them to resolve a conflict that happens when both headers are
included by the same file.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
These are necessary to use functions defined in these headers from C++.
Signed-off-by: David Lamparter <equinox@diac24.net>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
