Call from isis_circuit_create works only if we enable isis on an already
existing interface. If we configure isis on a pseudo interface and then
actually create it - this call doesn't work.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Necessary structures for snmp-id generation are currently stored in
`struct isis`. When we generate the new circuit ID, we always use the
instance from the default VRF. When we free the circuit ID, we use the
instance from the circuit VRF. This causes the following problems:
1. If there is no instance in the default VRF, this code doesn't work.
2. When circuit in non-default VRF is deleted, the ID is not actually
freed.
This is fixed by using global structures instead. The code itself is
moved to isis_snmp.c and linked to the main code using hooks. We should
not call SNMP-related code when the SNMP module is not loaded at all.
More than that, we don't allow to activate the circuit if we failed to
generate the SNMP ID. Even if SNMP support is completely disabled! This
check is removed.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Convert most DEFINE_MTYPE into the _STATIC variant, and move the
remaining non-static ones to appropriate places.
Signed-off-by: David Lamparter <equinox@diac24.net>
Add support for read only mib objects from RFC4444.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
Signed-off-by: Karen Schoener <karen@voltanet.io>
The fields in the broadcast/p2p union struct in an isis circuit are
initialized when the circuit goes up, but currently this step is
skipped if the interface is passive. This can create problems if the
circuit type (referred to as network type in the config) changes from
broadcast to point-to-point. We can end up with the p2p neighbor
pointer pointing at some garbage left by the broadcast struct in the
union, which would then cause a segfault the first time we would
dereference it - for example when building the lsp, or computing the
SPF tree.
compressed backtrace of a possible crash:
#0 0x0000555555579a9c in lsp_build at frr/isisd/isis_lsp.c:1114
#1 0x000055555557a516 in lsp_regenerate at frr/isisd/isis_lsp.c:1301
#2 0x000055555557aa25 in lsp_refresh at frr/isisd/isis_lsp.c:1381
#3 0x00007ffff7b2622c in thread_call at frr/lib/thread.c:1549
#4 0x00007ffff7ad6df4 in frr_run at frr/lib/libfrr.c:1098
#5 0x000055555556b67f in main at frr/isisd/isis_main.c:272
isis_lsp.c:
1112 case CIRCUIT_T_P2P: {
1113 struct isis_adjacency *nei = circuit->u.p2p.neighbor;
1114 if (nei && nei->adj_state == ISIS_ADJ_UP
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Replace all lib/thread cancel macros, use thread_cancel()
everywhere. Only the THREAD_OFF macro and thread_cancel() api are
supported. Also adjust thread_cancel_async() to NULL caller's pointer (if
present).
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The code in isisd uses `circuit->area->isis` all the time
but we know that circuit now has a valid `circuit->isis` pointer
so let's use that and cleanup the long dereference.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
There are code paths where we were not always setting the
circuit->isis on creation. Fix that up so it will always
happen.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
1. Added isis with different vrf and it's dependecies.
2. Added new vrf leaf in yang.
3. A minor change for IF_DOWN_FROM_Z passing argrument is
replaced with ifp pointer in api "isis_if_delete_hook()".
4. Minor fix in the isisd spf unit test.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
1. Created a structure "isis master".
2. All the changes are related to handle ISIS with different vrf.
3. A new variable added in structure "isis" to store the vrf name.
4. The display commands for isis is changed to support different VRFs.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
no need to check cicuit->area, as all code paths leading there
had already dereferenced it.
Fixes CID 1496314
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
if we shutdown an interface isisd will delete the adjacencies
on the corresponding circuit, but it will not log the change.
Fix it to make sure that each change is logged. Also specify
the level of the adjacency in the log message, while we are at it.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
before the last commit, it was possible under some
circumstances to call isis_circuit_af_set on a circuit
with a NULL area, e.g. if the circuit was deconfigured
due to a validation error. While this should not happen
now, let's add an explicit check to avoid crashing if
a regression is introduced.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
we were not correctly checking the MPLS-TE status of the area when
adding an IP address to a circuit, and this was preventing the local
address TLV to be populated after an interfaced flap.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
if mpls-te is enabled in the area, on creating a circuit we
must refresh the link params - else interfaces that are enabled
for IS-IS after configuring 'mpls-te on' will not correctly
advertise link parameters.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Since this command is modeled using YANG, it's already displayed
as part of the call to nb_cli_show_dnode_cmds(). Calling the
'isis_circuit_config_write' hook was only making that command
to be displayed twice.
The aforementioned hook is still necessary for fabricd, which wasn't
converted to the new northbound model yet.
Fixes#6281.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Some logging systems are, er, "allergic" to tabs in log messages.
(RFC5424: "The syslog application SHOULD avoid octet values below 32")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
when zebra detects that an interface is gone, notify the circuit but do
not disable it - the interface is still configured until it isn't.
Without this fix, removing the interface in the kernel and then removing
the circuit from the configuration would cause an assertion in isis_csm.c:78
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Rearrange the isisd northbound callbacks as following:
* isis_nb.h: prototypes of all northbound callbacks.
* isis_nb.c: definition of all northbound callbacks and their
associated YANG data paths.
* isis_nb_config.c: implementation of YANG configuration nodes.
* isis_nb_state.c: implementation of YANG state nodes.
* isis_nb_notifications.c: implementation of YANG notifications.
This should help to keep to code more organized and easier to
maintain.
No behavior changes intended.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Start the conversion to allow zapi interface callbacks to be
controlled like vrf creation/destruction/change callbacks.
This will allow us to consolidate control into the interface.c
instead of having each daemon read the stream and react accordingly.
This will hopefully reduce a bunch of cut-n-paste stuff
Create 4 new callback functions that will be controlled by
lib/if.c
create -> A upper level protocol receives an interface creation event
The ifp is brand spanking newly created in the system.
up -> A upper level protocol receives a interface up event
This means the interface is up and ready to go.
down -> A upper level protocol receives a interface down
destroy -> A upper level protocol receives a destroy event
This means to delete the pointers associated with it.
At this point this is just boilerplate setup for future commits.
There is no new functionality.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In preparation to Segment Routing:
- Update the management of Traffic Engineering subTLVs to the new tlvs parser
- Add Router Capability TLV 242 as per RFC 4971 & 7981
- Add Segment Routing subTLVs as per draft-isis-segment-routing-extension-25
Modified files:
- isis_tlvs.h: add new structure to manage TE subTLVs, TLV 242 & SR subTLVs
- isis_tlvs.c: add new functions (pack, copy, free, unpack & print) to process
TE subTLVs, Router Capability TLV and SR subTLVs
- isis_circuit.[c,h] & isis_lsp.[c,h]: update to new subTLVs & TLV processing
- isis_te.[c,h]: remove all old TE structures and managment functions,
and add hook call to set local and remote IP addresses as wellas update TE
parameters
- isis_zebra.[c,h]: add hook call when new interface is up
- isis_mt.[c,h], isis_pdu.c & isis_northbound.c: adjust to new TE subTLVs
- tests/isisd/test_fuzz_isis_tlv_tests.h.gz: adapte fuuz tests to new parser
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
This is necessary to avoid a name collision with std::for_each
from C++.
Fixes the compilation of the gRPC northbound module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Historically, isisd has been carrying around its own red-black tree to
manage its LSP DB in. This replaces that with the newly-added
DECLARE_RBTREE_*. This allows completely removing the dict_* code.
Signed-off-by: David Lamparter <equinox@diac24.net>
also fix a minor issue with isis_config_write where we were
not incrementing the write variable, which is used to append
a new line at the end of the vty string
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
remove the return value and redundant validations from
isis_circuit_circ_type_set(), since they are no longer needed.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Add a function send_hello_sched so that the logic for scheduling a
hello is not replicated inconsistently into different locations.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Before this commit, isisd/fabricd maintained a bitfield for each LSP
to track the SRM bit for each circuit, which specifies whether an LSP
needs to be sent on that circuit. Every second, it would scan over all
LSPs in `lsp_tick` and queue them up for transmission accordingly.
This design has two drawbacks: a) it scales poorly b) it adds
unacceptable latency to the update process: each router takes a random
amount of time between 0 and 1 seconds to forward an update. In a
network with a diamter of 10, it might already take 10 seconds for an
update to traverse the network.
To mitigate this, a new design was chosen. Instead of tracking SRM in a
bitfield, have one tx_queue per circuit and declare that an LSP is in
that queue if and only if it would have SRM set for that circuit.
This way, we can track SRM similarly as we did before, however, on
insertion into the LSP queue, we can add a timer for (re)transmission,
alleviating the need for a periodic scan with LSP tick and reducing the
latency for forwarding of updates.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric specifies that it should always be run with wide metrics via
P2P links and only as Level-2. Implement this as default and remove all
the knobs from fabricd which allow other configuration.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Remove isis_vty.c and create three new files isis_vty_common.c,
isis_vty_fabricd.c and isis_vty_isisd.c which are built into both
daemons, only fabricd and only isisd, respectively.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
fabricd is built using the sources of isisd. To allow differentiation
in the code, -DFABRICD=1 is added to its preprocessor flags.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When isis_sock_init fails in isis_circuit_up, isis_circuit_down would
be called to cancel timers which were scheduled. However
isis_circuit_down would immediately return, since the state had not been
changed to 'UP' yet.
Fix this by having isis_circuit_down always cancel all the timers.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The circuit->area value is always true in every code path
to isis_circuit_af_set( isis_vty.c ). Therefore was_enabled
will always be true.
If was_enabled ever became false then the area->ip_circuits
and area->ipv6_circuits lines would segfault.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The v4 and v6 prefixes were created but not deleted on
shutdown properly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
(cherry picked from commit 25b1001dc9)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Allow other supported Operating Systems (OS) to use file descriptor
polling, instead of doing timed fd checks. This should improve
performance greatly on modern OSes (e.g. that support polling on
filtered sockets).
The known OS that doesn't support this is FreeBSD < 5.0, but even then
FRR doesn't compile in these versions. OSes using DLPI method (e.g
Solaris) does not support select()/poll()ing fds as well, so it will be
disabled for it.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Add a timestamp information for level 2 circuits, otherwise if the
circuit is marked as already processed on level 1 we will not process
level 2 areas.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
IFINDEX_DELETED is not necessary anymore as we moved from a global
list of interfaces to a list of interfaces per VRF.
This reverts commit 84361d615.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Using the previously-added vty_frame() support, this gets rid of all the
pointless empty "interface XYZ" blocks that get added for any interface
that shows up in the system (e.g. dummys, tunnels, etc.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This allows modules to register their own additional hooks on interface
creation/deletion.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
