When using `addpath-tx-all` BGP announces all known paths instead of announcing
only an arbitrary number of best paths.
With this new command we can send N best paths to the neighbor. That means, we
send the best path, then send the second best path excluding the previous one,
and so on. In other words, we run best path selection algorithm N times before
we finish.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Not sure why it's here, but looks like it was since the beginning, let's see
if we can drop it.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add a hash_clean_and_free() function as well as convert
the code to use it. This function also takes a double
pointer to the hash to set it NULL. Also it cleanly
does nothing if the pointer is NULL( as a bunch of
code tested for ).
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
It was hard to catch those unless using higher values than uint32_t, but
already hit, it's time to fix completely.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Before this patch, we needed to explicitly define a neighbor to be SOLO
(= separate update-group). Let's ease this functionality for an operator to
avoid confusions.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
==1179738== 48 (40 direct, 8 indirect) bytes in 1 blocks are definitely lost in loss record 13 of 29
==1179738== at 0x483AB65: calloc (vg_replace_malloc.c:760)
==1179738== by 0x493C8D5: qcalloc (memory.c:116)
==1179738== by 0x208F0C: ecommunity_dup (bgp_ecommunity.c:267)
==1179738== by 0x2B300C: conf_copy (bgp_updgrp.c:170)
==1179738== by 0x2B35BF: peer2_updgrp_copy (bgp_updgrp.c:277)
==1179738== by 0x2B5189: update_group_find (bgp_updgrp.c:826)
==1179738== by 0x2B70D0: update_group_adjust_peer (bgp_updgrp.c:1769)
==1179738== by 0x23DB7D: update_group_adjust_peer_afs (bgp_updgrp.h:519)
==1179738== by 0x243B21: bgp_establish (bgp_fsm.c:2129)
==1179738== by 0x244B94: bgp_event_update (bgp_fsm.c:2597)
==1179738== by 0x26B0E6: bgp_process_packet (bgp_packet.c:2895)
==1179738== by 0x498F5FD: thread_call (thread.c:2008)
==1179738== by 0x49253DA: frr_run (libfrr.c:1198)
==1179738== by 0x1EEC38: main (bgp_main.c:520)
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Let's convert to our actual library call instead
of using yet another abstraction that makes it fun
for people to switch daemons.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
BGP SoO is a tag that is appended on BGP updates to allow a peer to mark
a particular peer as belonging to a particular site. In certain MPLS L3 VPN
configurations, the BGP AS-Path may not provide the granularity needed
prevent a loop in the control-plane. With this in mind, BGP SoO is designed
to fill this gap and prevent a routing loop that may occur.
If we configure for example, `neighbor soo 65000:1` at PEs, routes won't be
announced between CPEs if soo matches. This is especially needed when using
as-override or allowas-in.
Also, this is the automated way of the same behavior as configuring route-maps
for each peer like:
```
bgp extcommunity-list cpe permit soo 65000:1
!
route-map cpe permit 10
set extcommunity soo 65000:1
...
route-map cpe deny 10
match extcommunity cpe
route-map cpe permit 20
...
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The new outbound filter to apply conditional advertisement policy was
not working properly due to complications with update groups. The two
routemaps were properly copied into the update group peer filter but not
the conditional advertisement state.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Signed-off-by: Mark Stapp <mstapp@nvidia.com>
Handle ORF REMOVE_ALL events as well, because now we just silently return, and
a stale dynamic prefix-list is used instead of the new one.
Before this, soft clear/route refresh was needed. Don't know the reason, but
we didn't send updates when modifying the filters.
Probably due to a massive change of filters and to avoid automatic updates :/
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Just convert all uses of thread_cancel to THREAD_OFF. Additionally
use THREAD_ARG instead of t->arg to get the arguement. Individual
files should never be accessing thread private data like this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The GCC extended printf format checking plugin runs into some GCC
shortcomings regarding casts on printf function parameters. While this
can be fixed with a small GCC patch, patching GCC is "nontrivial" to say
the least. Luckily, it happens that this is /almost/ not an issue for
the FRR source base.
Since we fix SA "misunderstandings" too, let's just fix places where the
format checking plugin runs into this limitation to keep things working
extra smoothly.
(It's not a huge effort either, these two spots in bgpd are the only
places that trigger the plugin limitation, and it's been "clean" before
that for more than a year if my memory is right.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Description:
- When there is change in route-map properties after
setting the route-map with default route, changes
will not reflect.
- When route-map associated with default-originate is
deleted, default route doesn't get withdrawn.
- When there is change in route-map default-originate flow
does not get triggered.
Fix:
- One of the flags needs to be unset for default-originate
flow to get triggered after change in route-map.
Have unset the flag, so that default originate flow can
be triggered.
Co-authored-by: Abhinay Ramesh <rabhinay@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
RFC9234 is a way to establish correct connection roles (Customer/
Provider, Peer or with RS) between bgp speakers. This patch:
- Add a new configuration/terminal option to set the appropriate local
role;
- Add a mechanism for checking used roles, implemented by exchanging
the corresponding capabilities in OPEN messages;
- Add strict mode to force other party to use this feature;
- Add basic support for a new transitive optional bgp attribute - OTC
(Only to Customer);
- Add logic for default setting OTC attribute and filtering routes with
this attribute by the edge speakers, if the appropriate conditions are
met;
- Add two test stands to check role negotiation and route filtering
during role usage.
Signed-off-by: Eugene Bogomazov <eb@qrator.net>
The creation of the update group is a tiny bit of a black box and is hard
to figure out by hand if it is correct. Add a bit of code so that FRR
operators/developers can determine if the update group categorization
makes us happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Firstly, *keep no change* for `hash_get()` with NULL
`alloc_func`.
Only focus on cases with non-NULL `alloc_func` of
`hash_get()`.
Since `hash_get()` with non-NULL `alloc_func` parameter
shall not fail, just ignore the returned value of it.
The returned value must not be NULL.
So in this case, remove the unnecessary checking NULL
or not for the returned value and add `void` in front
of it.
Importantly, also *keep no change* for the two cases with
non-NULL `alloc_func` -
1) Use `assert(<returned_data> == <searching_data>)` to
ensure it is a created node, not a found node.
Refer to `isis_vertex_queue_insert()` of isisd, there
are many examples of this case in isid.
2) Use `<returned_data> != <searching_data>` to judge it
is a found node, then free <searching_data>.
Refer to `aspath_intern()` of bgpd, there are many
examples of this case in bgpd.
Here, <returned_data> is the returned value from `hash_get()`,
and <searching_data> is the data, which is to be put into
hash table.
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Take into account the maximum-prefix-out value when calculating the
update-group hash.
Fixes: fde246e835 ("bgpd: Add an option to limit outgoing prefixes")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
This should be garuanteed that we create a separate update-group if
bgp max packet size differs.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
We are inconsistently using peer_establiahed(peer) with
sometimes using `peer->status == Established`. Just Convert
over to using the function for consistency.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Reference: https://www.cmand.org/communityexploration
--y2--
/ | \
c1 ---- x1 ---- y1 | z1
\ | /
--y3--
1. z1 announces 192.168.255.254/32 to y2, y3.
2. y2 and y3 tags this prefix at ingress with appropriate
communities 65004:2 (y2) and 65004:3 (y3).
3. x1 filters all communities at the egress to c1.
4. Shutdown the link between y1 and y2.
5. y1 will generate a BGP UPDATE message regarding the next-hop change.
6. x1 will generate a BGP UPDATE message regarding community change.
To avoid sending duplicate BGP UPDATE messages we should make sure
we send only actual route updates. In this example, x1 will skip
BGP UPDATE to c1 because the actual route is the same
(filtered communities - nothing changes).
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Implemented as per the feature description given in the source link.
Descriprion:
The BGP conditional advertisement feature uses the non-exist-map or exist-map
and the advertise-map keywords of the neighbor advertise-map command in order
to track routes by the route prefix.
non-exist-map :
If a route prefix is not present in output of the non-exist-map command, then
the route specified by the advertise-map command is announced.
exist-map :
If a route prefix is present in output of the exist-map command, then the route
specified by the advertise-map command is announced.
The conditional BGP announcements are sent in addition to the normal
announcements that a BGP router sends to its peers.
The conditional advertisement process is triggered by the BGP scanner process,
which runs every 60 seconds. This means that the maximum time for the conditional
advertisement to take effect is 60 seconds. The conditional advertisement can take
effect sooner, depending on when the tracked route is removed from the BGP table
and when the next instance of the BGP scanner occurs.
Sample Configuration on DUT
---------------------------
Router2# show running-config
Building configuration...
Current configuration:
!
frr version 7.6-dev-MyOwnFRRVersion
frr defaults traditional
hostname router
log file /var/log/frr/bgpd.log
log syslog informational
hostname Router2
service integrated-vtysh-config
!
debug bgp updates in
debug bgp updates out
!
debug route-map
!
ip route 200.200.0.0/16 blackhole
ipv6 route 2001:db8::200/128 blackhole
!
interface enp0s9
ip address 10.10.10.2/24
!
interface enp0s10
ip address 10.10.20.2/24
!
interface lo
ip address 2.2.2.2/24
ipv6 address 2001:db8::2/128
!
router bgp 2
bgp log-neighbor-changes
no bgp ebgp-requires-policy
neighbor 10.10.10.1 remote-as 1
neighbor 10.10.20.3 remote-as 3
!
address-family ipv4 unicast
network 2.2.2.0/24
network 200.200.0.0/16
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 advertise-map ADVERTISE non-exist-map CONDITION
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
address-family ipv6 unicast
network 2001:db8::2/128
network 2001:db8::200/128
neighbor 10.10.10.1 activate
neighbor 10.10.10.1 soft-reconfiguration inbound
neighbor 10.10.10.1 advertise-map ADVERTISE_6 non-exist-map CONDITION_6
neighbor 10.10.20.3 activate
neighbor 10.10.20.3 soft-reconfiguration inbound
exit-address-family
!
access-list CONDITION seq 5 permit 3.3.3.0/24
access-list ADVERTISE seq 5 permit 2.2.2.0/24
access-list ADVERTISE seq 6 permit 200.200.0.0/16
access-list ADVERTISE seq 7 permit 20.20.0.0/16
!
ipv6 access-list ADVERTISE_6 seq 5 permit 2001:db8::2/128
ipv6 access-list CONDITION_6 seq 5 permit 2001:db8::3/128
!
route-map ADVERTISE permit 10
match ip address ADVERTISE
!
route-map CONDITION permit 10
match ip address CONDITION
!
route-map ADVERTISE_6 permit 10
match ipv6 address ADVERTISE_6
!
route-map CONDITION_6 permit 10
match ipv6 address CONDITION_6
!
line vty
!
end
Router2#
Withdraw when non-exist-map prefixes present in BGP table:
----------------------------------------------------------
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 3.3.3.0/24 10.10.20.3 0 0 3 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 4 routes and 4 total paths
For address family: IPv6 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::3/128 fe80::a00:27ff:fe76:6738 0 0 3 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 4 routes and 4 total paths
Router2#
Router2# show ip bgp neighbors 10.10.10.1
BGP neighbor is 10.10.10.1, remote AS 1, local AS 2, external link
!--- Output suppressed.
For address family: IPv4 Unicast
Update group 9, subgroup 5
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION, Advertise-map *ADVERTISE, status: Withdraw
1 accepted prefixes
For address family: IPv6 Unicast
Update group 10, subgroup 6
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION_6, Advertise-map *ADVERTISE_6, status: Withdraw
1 accepted prefixes
!--- Output suppressed.
Router2#
Here 2.2.2.0/24 & 200.200.0.0/16 (prefixes in advertise-map) are withdrawn
by conditional advertisement scanner as the prefix(3.3.3.0/24) specified
by non-exist-map is present in BGP table.
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 0.0.0.0 0 1 i
*> 3.3.3.0/24 0.0.0.0 0 3 i
Total number of prefixes 2
For address family: IPv6 Unicast
BGP table version is 8, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 :: 0 1 i
*> 2001:db8::3/128 :: 0 3 i
*> 2001:db8::200/128 :: 0 32768 i
Total number of prefixes 3
Router2#
Advertise when non-exist-map prefixes not present in BGP table:
---------------------------------------------------------------
After Removing 3.3.3.0/24 (prefix present in non-exist-map),
2.2.2.0/24 & 200.200.0.0/16 (prefixes present in advertise-map) are advertised
Router2# show ip bgp all wide
For address family: IPv4 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 10.10.10.1 0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Displayed 3 routes and 3 total paths
For address family: IPv6 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 fe80::a00:27ff:fecb:ad57 0 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::200/128 :: 0 32768 i
Displayed 3 routes and 3 total paths
Router2#
Router2# show ip bgp neighbors 10.10.10.1
!--- Output suppressed.
For address family: IPv4 Unicast
Update group 9, subgroup 5
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION, Advertise-map *ADVERTISE, status: Advertise
1 accepted prefixes
For address family: IPv6 Unicast
Update group 10, subgroup 6
Packet Queue length 0
Inbound soft reconfiguration allowed
Community attribute sent to this neighbor(all)
Condition NON_EXIST, Condition-map *CONDITION_6, Advertise-map *ADVERTISE_6, status: Advertise
1 accepted prefixes
!--- Output suppressed.
Router2#
Router2# show ip bgp all neighbors 10.10.10.1 advertised-routes wide
For address family: IPv4 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 0.0.0.0 0 1 i
*> 2.2.2.0/24 0.0.0.0 0 32768 i
*> 200.200.0.0/16 0.0.0.0 0 32768 i
Total number of prefixes 3
For address family: IPv6 Unicast
BGP table version is 9, local router ID is 2.2.2.2, vrf id 0
Default local pref 100, local AS 2
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
Network Next Hop Metric LocPrf Weight Path
*> 2001:db8::1/128 :: 0 1 i
*> 2001:db8::2/128 :: 0 32768 i
*> 2001:db8::200/128 :: 0 32768 i
Total number of prefixes 3
Router2#
Signed-off-by: Madhuri Kuruganti <k.madhuri@samsung.com>
