Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Use the correct function parameters type to avoid truncation and other
signal issues.
Found by Coverity Scan (CID 1519802)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Let's convert to our actual library call instead
of using yet another abstraction that makes it fun
for people to switch daemons.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Just convert all uses of thread_cancel to THREAD_OFF. Additionally
use THREAD_ARG instead of t->arg to get the arguement. Individual
files should never be accessing thread private data like this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Tested with full feed, this stucks and bgpd even stops responding.
```
[T58XM-TP956][EC 268435457] bgpd state -> unresponsive : no response yet to ping sent 90 seconds ago
```
This reverts commit db0e636dc4.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This code always used double-linked list before this rework in 8.0 that
introduced all these crashes and memory leaks. Using single-linked list
is actually a performance regression, because there are frequent removes
here and single-linked list obviously handles removes much worse.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
When bgp_damp_info_free is called from bgp_route.c, we were never
deleting the BDI from the list.
Move the deletion inside bgp_damp_info_free to cover all cases.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Current code is a complete misuse of SLIST structure. Instead of just
adding a SLIST_ENTRY to struct bgp_damp_info, it allocates a separate
structure to be a node in the list.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
One more crash in dampening code...
When bgp_damp_withdraw is called, if there's already a BDI structure,
bgp_damp_info_claim is called to re-assign the bdi->config in case it
was changed. The problem is that bgp_damp_info_claim actually removes
the BDI from the reuse list of the old config and never adds it to the
reuse list of the new config. We must do this to prevent the crash
because all the code assumes that BDI is always in some list.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Seems really not necessary pointing to initial value before while loop, where
it's assigned anyway.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Add a terse option to show bgp summary to shorten output.
Do not show the following information about the BGP
instances: the number of RIB entries, the table version and the used memory.
The "terse" option can be used in combination with the "remote-as", "neighbor",
"failed" and "established" filters, and with the "wide" option as well.
Before patch:
ubuntu# show bgp summary remote-as 123456
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
BGP table version 0
RIB entries 3, using 552 bytes of memory
Peers 5, using 3635 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
% No matching neighbor
Total number of neighbors 5
After patch:
ubuntu# show bgp summary remote-as 123456 terse
IPv4 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 0
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt Desc
10.200.200.2 4 123456 81432 4 0 56092 0 00:00:13 572106 0 N/A
Displayed neighbors 1
Total number of neighbors 4
IPv6 Unicast Summary (VRF default):
BGP router identifier X.X.X.X, local AS number XXX vrf-id 1
% No matching neighbor
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Description:
clear ip bgp dampening was not triggering the route
calculation for the prefix, Due to this prefix are not install in
RIB(Zebra) and not adv to neighbor
Problem Description/Summary :
clear ip bgp dampening was not triggering the route
calculation for the prefix, Due to this prefix are not install in
RIB(Zebra) and not adv to neighbor
Fix: When clear ip bgp dampening, route are put for route-calculation as
that it is install in the Zebra and adv to neighbor.
Signed-off-by: sudhanshukumar22 <sudhanshu.kumar@broadcom.com>
Changes implement dampening profiles for peers and peer groups. This is
achieved by introducing the possibility to have multible existing
dampening configurations with their own sets of parameters and lists of
associated paths.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
Change thread_cancel to take a ** to an event, NULL-check
before dereferencing, and NULL the caller's pointer. Update
many callers to use the new signature.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
This is the bulk part extracted from "bgpd: Convert from `struct
bgp_node` to `struct bgp_dest`". It should not result in any functional
change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add new function `bgp_node_get_prefix()` and modify
the bgp code base to use it.
This is prep work for the struct bgp_dest rework.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The bgp_damp_config_clean() function was deallocating some arrays without
resetting the variables that represent their sizes. This was leading to
some crashes because other parts of the code iterate over these arrays
by looking at their corresponding sizes, which could be invalid.
Fixes the following segfaults (which only happen under certain
circumstances):
vtysh -c "configure terminal" -c "router bgp 1" -c "bgp dampening"
vtysh -c "configure terminal" -c "router bgp 1" -c "no bgp dampening"
vtysh -c "configure terminal" -c "router bgp 1" -c "no bgp dampening 45"
vtysh -c "" -c "clear ip bgp dampening"
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
