The vrf_id in `zsend_interface_vrf_update()` is encoded as
a long via `stream_putl()`, we should decode it as such
as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
This includes:
1. Defining message formats
2. Stream Decoding after receiving the message at PIM
3. Handling MLAG UP & Down Notifications
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
when ever a FRR Client wants to send any data to another node
using MLAG Channel, uses below mechanisam.
1. sends a MLAG Registration to zebra with interested messages that
it is intended to receive from peer.
2. In response to this request, Zebra opens communication channel with
MLAG. and also in Rx. diretion zebra forwards only those messages which
client shown interest during registration
3. when client is no-longer interested in communicating with MLAG, client
posts De-register to Zebra
4. if this is the last client which is interested for MLAG Communication,
zebra closes the channel.
why PIM Needs MLAG Communication
================================
1. In general on LAN Networks elecetd DR will send the Join towards
Multicast RP in case of a LHR and Register in case of FHR.
2. But in case DR Goes down, traffic will be re-converged only after
the New DR is elected, but this can take time based on Hold Timer to
detect the DR down.
3. this can be optimised by using MLAG Mecganisam.
4. and also Traffic can be forwarded more efficiently by knowing the cost
towards RP using MLAG
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
This new message makes it possible to install/reinstall LSPs with
multiple nexthops using a single ZAPI message.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Add ability to specify the nexthop type;
* Add ability to install or not a FTN (in addition to an LSP).
These two additions will be useful to install local SR Prefix-SIDs
configured with the no-PHP option.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use the route type and instance instead of the route distance
to identify MPLS FTNs. This is a more robust approach since the
routing daemons can modify the distance of their announced routes
via configuration, which can cause inconsistencies.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do this for the following reasons:
* Improve modularity of the code by separating the decoding of the
ZAPI messages from their processing;
* Create an API that is easier to use by the client daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some other ZAPI decode functions still use void return values and
can't propagate stream errors to their callers. They need to be fixed
as well in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Sort nexthops before we push them to zebra. This offloads
the nexthop sorting zebra is doing onto the upper level protocols
so that when it gets to zebra and we construct a group, it just has
to append them to the tail for every nexthop.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
when requesting a specific label chunk (e.g. for the SRGB),
it might happen that we cannot get what we want. In this
event, we must be prepared to receive a response with no
label chunk. Without this fix, if the remote label manager
was not able to alloate the chunk we requested, we would
hang indefinitely trying to read data from the stream which
was not there.
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
For SRGB, we need to support chunk requests starting at a
specific point in the label space, rather than just asking
for any sufficiently large chunk. To this purpose, we extend
the label manager api to request a chunk with a base value;
if the base is set to 0, the label manager will behave as it
currently does, i.e. fetching the first free chunk big enough
to satisfy the request.
update all the existing calls to get chunks from the label
manager so that they use MPLS_LABEL_BASE_ANY as the base
for the requested chunk
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
Field vrf_id is replaced by the pointer of the struct vrf *.
For that all other code referencing to (interface)->vrf_id is replaced.
This work should not change the behaviour.
It is just a continuation work toward having an interface API handling
vrf pointer only.
some new generic functions are created in vrf:
vrf_to_id, vrf_to_name,
a zebra function is also created:
zvrf_info_lookup
an ospf function is also created:
ospf_lookup_by_vrf
it is to be noted that now that interface has a vrf pointer, some more
optimisations could be thought through all the rest of the code. as
example, many structure store the vrf_id. those structures could get
the exact vrf structure if inherited from an interface vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
the vrf_id parameter is replaced by struct vrf * parameter.
this impacts most of the daemons that look for an interface based on the
name and the vrf identifier.
Also, it fixes 2 lookup calls in zebra and sharpd, where the vrf_id was
ignored until now.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
vrf pointer is used as reference when calling if_get_by_name() function.
this will permit to create interfaces with an unknown vrf_id, since it
is only necessary to get the vrf structure to store the interfaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
When you have compiled FRR with a large multipath number
then encoding large ecmp routes between zebra and the
routing daemons. There exists a theoritical size
of multipath that will cause the encoding to be larger
than the ZEBRA_MAX_PACKET_SIZ. In the cases where
we have allocated streams that will encode routes
then let's ensure that whatever size we have will
auto-fit what we say we can send.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This macro:
- Marks ZAPI callbacks for readability
- Standardizes argument names
- Makes it simple to add ZAPI arguments in the future
- Ensures proper types
- Looks better
- Shortens function declarations
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
These updates act as triggers to pimd to -
1. join the MDT for rxing VxLAN encapsulated BUM traffic
2. register the local-vtep-ip as a source for the MDT
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Problem found in bgpd where it wasn't learning interface address
information at startup due to the interface information becoming
available before the bgp instance was created. This issue was
caused by an earlier change that tried to make the interface
information discovery process more efficient but left this hole
for bgpd. For now, putting back in the previous method of
gathering interface info via the zclient_send_reg_requests call
and will revisit a more efficient way to get the info in the future.
Ticket: CM-23932
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Ask for all interface information after we have connected
to zebra and sent the initial hello.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The onlink attribute was being passed from upper level protocols
as an attribute of the route *not* the individual nexthop. When
we pass this data to the kernel, we treat the onlink as a attribute
of the nexthop. This commit modifies the code base to allow
us to pass the ONLINK attribute as an attribute of the nexthop.
This commit also fixes static routes that have multiple nexthops
some onlink and some not.
ip route 4.5.6.7/32 192.168.41.1 eveth1 onlink
ip route 4.5.6.7/32 192.168.42.2
S>* 4.5.6.7/32 [1/0] via 192.168.41.1, eveth1 onlink, 00:03:04
* via 192.168.42.2, eveth2, 00:03:04
sharpd@robot ~/frr2> sudo ip netns exec EVA ip route show
4.5.6.7 proto 196 metric 20
nexthop via 192.168.41.1 dev eveth1 weight 1 onlink
nexthop via 192.168.42.2 dev eveth2 weight 1
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a new field in the ZEBRA_CAPABILITIES zapi message specifying
the VRF backend in use.
For simplicity, make the zclient code call vrf_configure_backend()
to apply the received value automatically instead of requiring
the daemons to do that themselves in their zebra_capabilities()
callbacks.
Additionally, call zebra_vrf_update_all() only after sending the
capabilities message to the client, so that it will know which VRF
backend is in use when processing the VRF messages.
This commit fixes a couple of bugs in the "interface" CLI command and
associated northbound callbacks, which behave differently depending
on the VRF backend in use. Before this commit, the vrf_backend
variable would always be set to VRF_BACKEND_NETNS in the client
daemons, even when zebra was started without the --vrfwnetns option.
This could lead to inconsistent behavior and subtle bugs under
specific circumstances.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In these two functions, we were using VRF_DEFAULT instead of the
VRF ID passed as a parameter when checking if the given client
subscribed to receive default routes or not. This prevented the
"default-originate" command from ospfd/isisd from working correctly
under specific circumstances.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some daemons like ospfd and isisd have the ability to advertise a
default route to their peers only if one exists in the RIB. This
is what the "default-information originate" commands do when used
without the "always" parameter.
For that to work, these daemons use the ZEBRA_REDISTRIBUTE_DEFAULT_ADD
message to request default route information to zebra. The problem
is that this message didn't have an AFI parameter, so a default route
from any address-family would satisfy the requests from both daemons
(e.g. ::/0 would trigger ospfd to advertise a default route to its
peers, and 0.0.0.0/0 would trigger isisd to advertise a default route
to its IPv6 peers).
Fix this by adding an AFI parameter to the
ZEBRA_REDISTRIBUTE_DEFAULT_{ADD,DELETE} messages and making the
corresponding code changes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Unlike the other interface zapi messages, ZEBRA_INTERFACE_VRF_UPDATE
identifies interfaces using ifindexes and not interface names. This
is a problem because zebra always sends ZEBRA_INTERFACE_DOWN
and ZEBRA_INTERFACE_DELETE messages before sending
ZEBRA_INTERFACE_VRF_UPDATE, and the ZEBRA_INTERFACE_DELETE callback
from all daemons set the interface index to IFINDEX_INTERNAL. Hence,
when decoding a ZEBRA_INTERFACE_VRF_UPDATE message, the interface
lookup would always fail since the corresponding interface lost
its ifindex. Example (ospfd):
OSPF: Zebra: Interface[rt1-eth2] state change to down.
OSPF: Zebra: interface delete rt1-eth2 vrf default[0] index 8 flags 11143 metric 0 mtu 1500
OSPF: [EC 100663301] INTERFACE_VRF_UPDATE: Cannot find IF 8 in VRF 0
To fix this problem, use interface names instead of ifindexes to
indentify interfaces like the other interface zapi messages do.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
the netns discovery process executed when vrf backend is netns, allows
the zebra daemon to dynamically change the default vrf name value. This
option is disabled, when the zebra is forced to a default vrf value with
option -o.
PR=61513
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
It's been a year since we added the new optional parameters
to instantiation. Let's switch over to the new name.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The frr-interface YANG module models interfaces using a YANG list keyed
by the interface name and the interface VRF. Interfaces can't be keyed
only by their name since interface names might not be globally unique
when the netns VRF backend is in use. When using the VRF-Lite backend,
however, interface names *must* be globally unique. In this case, we need
to validate the uniqueness of interface names inside the appropriate
northbound callback since this constraint can't be expressed in the
YANG language. We must also ensure that only inactive interfaces can be
removed, among other things we need to validate in the northbound layer.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Corrections so that the BGP daemon can work with the label manager properly
through a label-manager proxy. Details:
- Correction so the BGP daemon behind a proxy label manager gets the range
correctly (-I added to the BGP daemon, to set the daemon instance id)
- For the BGP case, added an asynchronous label manager connect command so
the labels get recycled in case of a BGP daemon reconnection. With this,
BGPd and LDPd would behave similarly.
Signed-off-by: F. Aragon <paco@voltanet.io>
The ZEBRA_IPV4_ROUTE_[ADD|DELETE] and ZEBRA_IPV6_ROUTE_[ADD|DELETE] functionality
has been deprecated for a year now, let's remove this code from the system.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add client proto and instance number in all msg (request and
responses) to/form a label manager. This is required for a
label manager acting as 'proxy' (i.e. relaying messages towards
another label manager) to correctly deliver responses to the
requesting clients.
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
The API for filling in an IPTABLE_ADD and IPTABLE_DELETE message.
Also, the API is handling the notification callback, so as to know if
zebra managed to add or delete the relevant iptable entry.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Zebra is starting to have some run-time capabilites that would be
useful to pass up to the higher level protocols so that they
can act in an appropriate manner when needed.
Send the ecmp value zebra is being run with and whether or not
we believe mpls is enabled in the kernel or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Properly notice when we get if up/down and vrf enable/disable
events and attempt to properly install nexthops as they
come in.
Ticket: CM20489
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The pbr_rule structure is derived from zebra_pbr_rule, and is
defined, so that a zclient will be able to encode the zebra_pbr_rule to
send ADD_RULE or DEL_RULE command. Also, the same structure can be used
by other daemons to derive a structure ( this will be the case for
zebra_pbr_rule).
Adding to this, an encoding function is defined, and will be used by
remote daemon to encode that message.
Those definitions are moved in new file pbr.h file.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Once ipset entries are injected in the kernel, the relevant daemon is
informed with a zebra message sent back.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
MPLS label pool backed by allocations from the zebra label manager.
A caller requests a label (e.g., in support of an "auto" label
specification in the CLI) via lp_get(), supplying a unique ID and
a callback function. The callback function is invoked at a later
time with the unique ID and a label value to inform the requestor
of the assigned label.
Requestors may release their labels back to the pool via lp_release().
The label pool is stocked with labels allocated by the zebra label
manager. The interaction with zebra is asynchronous so that bgpd
is not blocked while awaiting a label allocation from zebra.
The label pool implementation allows for bgpd operation before (or
without) zebra, and gracefully handles loss and reconnection of
zebra. Of course, before initial connection with zebra, no labels
are assigned to requestors. If the zebra connection is lost and
regained, callbacks to requestors will invalidate old assignments
and then assign new labels.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
Routes that have labels must be sent via a nexthop that also has labels.
This change notes whether any path in a nexthop update from zebra contains
labels. If so, then the nexthop is valid for routes that have labels.
If a nexthop update has no labeled paths, then any labeled routes
referencing the nexthop are marked not valid.
Add a route flag BGP_INFO_ANNC_NH_SELF that means "advertise myself
as nexthop when announcing" so that we can track our notion of the
nexthop without revealing it to peers.
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
The library changes add 3 new messages to exchange between daemons and
ZEBRA.
- ZEBRA_TABLE_MANAGER_CONNECT,
- ZEBRA_GET_TABLE_CHUNK,
- ZEBRA_RELEASE_TABLE_CHUNK,
the need is that routing tables identifier are shared by various
services. For the current case, policy routing enhancements are planned
to be used in FRR. Poliy routing relies on routing tables identifiers
from kernels. It will be mainly used by the future policy based routing
daemon, but not only. In the flowspec case, the BGP will need also to
inject policy routing information into specific routing tables.
For that, the proposal is made to let zebra give the appropriate range
that is needed for all daemons.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
When we are signaling to a client from zebra that a nexthop
has changed, include the labels on the nexthop as well.
Upper level protocols need to know if the labels exist
in order to make intelligent decisions about what to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Nobody uses it, but it's got the same definition. Move the parser
function into zclient.c and use it.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Allow the calling daemon to pass down what table-id we
want to use to install the route. Useful for PBR.
The vrf id passed must be the VRF_DEFAULT else this
value is ignored.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the originating routes type and instance to the nexthop
update message. This is necessary because there exist
scenarios where BGP needs to make a decision about the
originating route type and instance to know if it is
going to be doing a route replace to a route that would
resolve to itself.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The addition of some rmac code snuck in the usage of a
stream_get instead of a STREAM_GET()
We need to be using STREAM_GET()
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The addition of the name of the netns in the vrf message introduces also
a limitation when the size of the netns is bigger than 15 bytes. Then
the netns are ignored by the library.
In addition to this, some sanity checks have been introduced. some
functions to create the netns from a call not coming from the vty is
being added with traces.
Also, the ns vty function is reentrant, if the context is already
created.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In the future we are going to have a rule_notify_owner
so make the distinction between the two types of notification
clearer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The notification of the owner was not properly decoding
the prefix and as such we were not properly reading the
table it was installed into.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to pass in an afi to zebra. zebra_vrf keeps
track of the afi/label tuple and then does the right thing
before we call down. AF_MPLS does not care about v4 or v6
it just knows label and what device to use for lookup.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to pass the lsp owner type through the zapi
and in addition add a new label type for the sharp protocol
for testing.
Finally modify zebra_mpls.h to not have defaults specified
for the enum. That way when we add a new LSP type the
compile fails and the person doing the addition knows
where he has to touch shit.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Turns out we had 3 different ways to define labels
all of them overlapping with the same meanings.
Consolidate to 1. This one choosen is consistent
naming wise with what the *bsd and linux kernels
use.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For L3VPN's we need to create a label associated with the specified
vrf to be installed into the kernel to allow a pop and lookup
operation.
The new api is:
zclient_send_vrf_label(struct zclient *zclient, vrf_id_t vrf_id,
mpls_label_t label);
For the specified vrf_id associate the specified label for
a pop and lookup operation for forwarding.
To setup a POP and Forward use MPLS_LABEL_IMPLICIT_NULL
If the same label is passed in we ignore the call.
If the label is different we update entry.
If the label is MPLS_LABEL_NONE we remove
the entry.
This sets up the api. Future commits will have the functionality
to actually install into the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Create a zapi_nexthop_update_decode function that both
pim and bgp use to decode the message from zebra.
There probably could be further optimizations but I opted
to keep the code as similiar as is possible between the
originals because they both make some assumptions about
code flow that I do not fully understand yet.
The real goal here is that I want to create a new
user of the nexthop tracking code from a higher level
daemon and I see no need to re-implement this damn
code again for a 3rd time.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In EVPN symmetric routing, not all subnets are presents everywhere.
We have multiple scenarios where a host might not get learned locally.
1. GARP miss
2. SVI down/up
3. Silent host
We need a mechanism to resolve such hosts. In order to achieve this,
we will be advertising a subnet route from a box and that box will help
in resolving the ARP to such hosts.
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Abstract the code that sends the zapi message into zebra
for the turn on/off of nexthop tracking for a prefix.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The zclient->redist bitmap for vrf's was being set again
for the zclient_send_dereg_requests function. This should
be a unset on tear down.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is a preparatory work for configuring vrf/frr over netns
vrf structure is being changed to 32 bit, and the VRF will have the
possibility to have a backend made up of NETNS.
Let's put some history.
Initially the 32 bit was because one wanted to map on vrf_id both the
VRFLITE and the NSID.
Initially, one would have liked to make zebra configure at the same time
both vrf lite and vrf from netns in a flat way. From the show
running perspective, one would have had both kind of vrfs, thatone
would configure on the same way.
however, it leads to inconsistencies in concepts, because it mixes vrf
vrf with vrf, and vrf is not always mapped with netns.
For instance, logical-router could also be used with netns. In that
case, it would not be possible to map vrf with netns.
There was an other reason why 32 bit is proposed. this is because
some systems handle NSID to 32 bits. As vrf lite exists only on
Linux, there are other systems that would like to use an other vrf
backend than vrf lite. The netns backend for vrf will be used for that
too. for instance, for windows or freebsd, some similar
netns concept exists; so it will be easier to reuse netns
backend for vrf, than reusing vrflite backend for vrf.
This commit is here to extend vrf_id to 32 bits. Following commits in a
second step will help in enable a VRF backend.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Allow the higher level protocol to specify if it would
like to receive notifications about it's routes that
it has installed.
I've purposely made it part of zclient_new_notify because
we need to track the routes on a per daemon basis only.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Provide ZAPI code that can pass to an upper level protocol
what happened to it's route on install.
There are these notifications:
1) ZAPI_ROUTE_FAIL_INSTALL - The route attempted to be
installed did not work.
2) ZAPI_ROUTE_BETTER_ADMIN_WON - A route that was installed
has become un-installed due to another routing protocol
installing a better admin distance
3) ZAPI_ROUTE_INSTALLED - The route specified has been installed
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The safi encode/decode is using 2 bytes, which
may cause problems on some platforms. Let's assume
that a safi is a uint8_t and work accordingly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code modifies zebra to use the STREAM_GET functionality.
This will allow zebra to continue functioning in the case of
bad input data from higher level protocols instead of crashing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Performance tests showed that, when running on a system with a large
number of interfaces, some daemons would spend a considerable amount
of time in the if_lookup_by_index() function. Introduce a new rb-tree
to solve this problem.
With this change, we need to use the if_set_index() function whenever
we want to change the ifindex of an interface. This is necessary to
ensure that the 'ifaces_by_index' rb-tree is updated accordingly. The
return value of all insert/remove operations in the interface rb-trees
is checked to ensure that an error is logged if a corruption is
detected.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Make use of strnlen() and strlcpy() so we can get rid of these
convoluted if_*_by_name_len() functions.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
list_free is occassionally being used to delete the
list and accidently not deleting all the nodes.
We keep running across this usage pattern. Let's
remove the temptation and only allow list_delete
to handle list deletion.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Current cleanup is for unset values or variables that are not used anymore.
Regarding ospfd/ospf_vty.c: argv_find()
we'll never get it NULL, so get coststr = argv[idx]->arg;
This is a fallout from PR #1022 (zapi consolidation). In the early days,
the client daemons would allocate enough memory to send all nexthops
to zebra. Then zebra would add all nexthops to the RIB and respect
MULTIPATH_NUM only when installing the routes in the kernel. Now things
are different and the client daemons can send at most MULTIPATH_NUM
nexthops to zebra, and failure to respect that will result in a buffer
overflow. The MULTIPATH_NUM limit in the new zebra API is a small price
we pay to avoid allocating memory for each route sent to zebra.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FLAG_BLACKHOLE is used for different things in different places. remove
it from the zclient API, instead indicate blackholes as proper nexthops
inside the message.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If we assign MULTIPATH_NUM to be 256, this causes issues
for us since 256 is bigger than a u_char. So let's make
the api's multipath_num to be a u_int16_t and pass it
around as a word.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some differences compared to the old API:
* Now the redistributed routes are sent using address-family
independent messages (ZEBRA_REDISTRIBUTE_ROUTE_ADD and
ZEBRA_REDISTRIBUTE_ROUTE_DEL). This allows us to unify the ipv4/ipv6
zclient callbacks in the client daemons and thus remove a lot of
duplicate code;
* Now zebra sends all nexthops of the redistributed routes to the client
daemons, not only the first one. This shouldn't have any noticeable
performance implications and will allow us to remove an ugly exception
we had for ldpd (which needs to know all nexthops of the redistributed
routes). The other client daemons can simply ignore the nexthops if
they want or consult just the first one (e.g. ospfd/ospf6d/ripd/ripngd).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
As noticed in 657cde1, the zapi_ipv[4|6]_route functions are broken in
many ways and that's the reason that many client daemons (e.g. ospfd,
isisd) need to send handcrafted messages to zebra.
The zapi_route() function introduced by Donald solves the problem
by providing a consistent way to send ipv4/ipv6 routes to zebra with
nexthops of any type, in all possible combinations including IPv4 routes
with IPv6 nexthops (for BGP unnumbered routes).
This patch goes a bit further and creates two new address-family
independent ZAPI message types that the client daemons can
use to advertise route information to zebra: ZEBRA_ROUTE_ADD and
ZEBRA_ROUTE_DELETE. The big advantage of having address-family independent
messages is that it allows us to remove a lot of duplicate code in zebra
and in the client daemons.
This patch also introduces the zapi_route_decode() function. It will be
used by zebra to decode route messages sent by the client daemons using
zclient_route_send(), which calls zapi_route_encode().
Later on we'll use this same pair of encode/decode functions to
send/receive redistributed routes from zebra to the client daemons,
taking the idea of removing code duplication to the next level.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This patch introduces the following changes to the zapi_route structure
and associated code:
* Use a fixed-size array to store the nexthops instead of a pointer. This
makes the zapi_route() function much easier to use when we have multiple
nexthops to send. It's also much more efficient to put everything on
the stack rather than allocating an array in the heap every time we
need to send a route to zebra;
* Use the new 'zapi_nexthop' structure. This will allow the client daemons
to send labeled routes without having to allocate memory for the labels
(the 'nexthop' structure was designed to be memory efficient and doesn't
have room for MPLS labels, only a pointer). Also, 'zapi_nexthop' is more
compact and more clean from an API perspective;
* Embed the route prefix inside the zapi_route structure. Since the
route's prefix is sent along with its nexthops and attributes, it makes
sense to pack everything inside the same structure.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Base framework for supporting MPLS pseudowires in FRR.
A consistent zserv interface is provided so that any client daemon
(e.g. ldpd, bgpd) can install/uninstall pseudowires in a standard
way. Static pseudowires can also be implemented by using the same
interface.
When zebra receives a request to install a pseudowire and the installation
in the kernel or hardware fails, a notification is sent back to the
client daemon and a new install attempt is made every 60 seconds (until
it succeeds).
Support for external dataplanes is provided by the use of hooks to
install/uninstall pseudowires.
Signed-off-by: ßingen <bingen@voltanet.io>
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This adds "@tcp" as new choice on the -z option present in zebra and the
protocol daemons. The --enable-tcp-zebra option on configure is no
longer needed, both UNIX and TCP socket support is always available.
Note that @tcp should not be used by default (e.g. in an init script),
and --enable-tcp-zebra should never have been in any distro package
builds, because
**** TCP-ZEBRA IS A SECURITY PROBLEM ****
It allows arbitrary local users to mess with the routing table and
inject bogus data -- and also ZAPI is not designed to be robust against
attacks.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The pimregX devices when created by the kernel are put into
the default vrf. When pim gets the callback that the device
exists, check to see if it is a pimregX device and if so
move it into the appropriate vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Allow routing protocols to call one function to add/delete
routes into zebra. Future commits will start adding
this code to individual routing protocols.
Why are we doing this? Well the zapi_ipv[4|6]_route functions
are fundamentally broken in their ability to pass down anything
but NEXTHOP_TYPE_IFINDEX or NEXTHOP_TYPE_IPV[4|6] and we need
the ability to pass down a bit more information.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
pim controls the vrf table creation for due to the way that
pim must interact with the kernel. In order to match the
table_id for unicast <-> multicast( not necessary but a
real nice to have ) we need to pass up from zebra the
table_id associated with the vrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Segregate the vrf enable/disable functionality from other vrf
code. This is to ensure that people are not actually using
the functions when they should not be. Also document the
why of it properly in the new vrf_int.h header.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
To avoid blocking zebra when it's acting as a proxy for an external
label manager.
Besides:
Fix get chunk reconnection. Socket was still being destroyed on failure,
so next attempt would never work.
Filter out unwanted messages in lm sync sock.
Until LDE client sends ZEBRA_LABEL_MANAGER_CONNECT message, zserv
doesn't know which kind of client it is, so it might enqueue unwanted
messages like interface add, interface up, etc. Changes in this commit
discard those messages in the client side in case they arrive before the
expected response.
Change function name for zclient_connect in label manager to avoid
confusion with zclient one.
Signed-off-by: ßingen <bingen@voltanet.io>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
