Effectively a massive search and replace of
`struct thread` to `struct event`. Using the
term `thread` gives people the thought that
this event system is a pthread when it is not
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Rather than running selected source files through the preprocessor and a
bunch of perl regex'ing to get the list of all DEFUNs, use the data
collected in frr.xref.
This not only eliminates issues we've been having with preprocessor
failures due to nonexistent header files, but is also much faster.
Where extract.pl would take 5s, this now finishes in 0.2s. And since
this is a non-parallelizable build step towards the end of the build
(dependent on a lot of other things being done already), the speedup is
actually noticeable.
Also files containing CLI no longer need to be listed in `vtysh_scan`
since the .xref data covers everything. `#ifndef VTYSH_EXTRACT_PL`
checks are equally obsolete.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
There are lib debugs being set but never show up in
`show debug` commands because there was no way to show
that they were being used. Add a bit of infrastructure
to allow this and then use it for `debug route-map`
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This extra newline was adding a weird output to `show debugging`
display where there would be extra newlines sometims and not
others. Make it consistent.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
FRR stores the route_tag in network byte order. Bug filed indicates
that the `show ip ospf route` command shows the correct value.
Every place route_tag is dumped in ospf_vty.c the ntohl function
is used first.
Fixes: #10450
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
In PointToPoint networks, There wont be DR and BDR.
But by default, All neighbours ism state is shown as
DR_OTHER.
Changed the nbr state format to <nbrsate>/- (ex : FULL/-)
to P2pnetworks.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
The `show ip ospf neighbor json` command was displaying
state:`Full\/DR`
Where state was both the role and whether or not the neigbhor
was converged. While from a OSPF perspective this is the state.
This state is a combination of two things.
This creates a problem in testing because we have no guarantee
that a particular ospf router will actually have a particular role
given how loaded our topotest systems are. So add a bit of json
output to display both the converged status as well as the
role this router is playing on this neighbor/interface.
The above becomes:
state:`Full\/DR`
converged:`Full`
role:`DR`
Tests can now be modified to look for `Full` and allow it to
continue. Most of the tests do not actually care if this
router is the DR or Backup.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
* Some of the debug flags were not shown in show debugging.
* The check for TI-LFA debug was made against the wrong variable.
* Some of the debugs were not cleared with 'no debug ospf'
Signed-off-by: Fredi Raspall <fredi@voltanet.io>
Remove previous log config
debug ospf graceful-restart helper
and just use
debug ospf graceful-restart
for everything related to OSPF GR.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
When browsing or parsing OSPF LSA TLVs, we need to use the LSA length which is
part of the LSA header. This length, encoded in 16 bits, must be first
converted to host byte order with ntohs() function. However, Coverity Scan
considers that ntohs() function return TAINTED data. Thus, when the length is
used to control for() loop, Coverity Scan marks this part of the code as defect
with "Untrusted Loop Bound" due to the usage of Tainted variable. Similar
problems occur when browsing sub-TLV where length is extracted with ntohs().
To overcome this limitation, a size attribute has been added to the ospf_lsa
structure. The size is set when lsa->data buffer is allocated. In addition,
when an OSPF packet is received, the size of the payload is controlled before
contains is processed. For OSPF LSA, this allow a secure buffer allocation.
Thus, new size attribute contains the exact buffer allocation allowing a
strict control during TLV browsing.
This patch adds extra control to bound for() loop during TLV browsing to
avoid potential problem as suggested by Coverity Scan. Controls are based
on new size attribute of the ospf_lsa structure to avoid any ambiguity.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Store instance index at startup and use it when processing vty commands.
The instance itself may be created and deleted by the user in runtime
using `[no] router ospf X` command.
Fixes#7908
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Description:
Added the following debug commands to enable debugs
GR helper functionality.
[no] debug ospf gr helper
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Default originate with route-map was broken. Routemap
was not getting applied for redistribute route but was
getting applied default route itself. No default route
was originated even when routemap was satisfied.
Signed-off-by: Santosh P K <sapk@vmware.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Turning on packet debugs and seeing a header dump that is 11
lines long is useless
2019/11/07 01:07:05.941798 OSPF: ip_v 4
2019/11/07 01:07:05.941806 OSPF: ip_hl 5
2019/11/07 01:07:05.941813 OSPF: ip_tos 192
2019/11/07 01:07:05.941821 OSPF: ip_len 68
2019/11/07 01:07:05.941831 OSPF: ip_id 48576
2019/11/07 01:07:05.941838 OSPF: ip_off 0
2019/11/07 01:07:05.941845 OSPF: ip_ttl 1
2019/11/07 01:07:05.941857 OSPF: ip_p 89
2019/11/07 01:07:05.941865 OSPF: ip_sum 0xcf33
2019/11/07 01:07:05.941873 OSPF: ip_src 200.254.30.14
2019/11/07 01:07:05.941882 OSPF: ip_dst 224.0.0.5
We already have this debugged, it's not going to change and the
end developer can stick this back in if needed by hand to debug
something that is not working properly.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
