The netns backend is chosen by VRF if a runtime flag named vrfwnetns is
selected when running zebra.
In the case the NETNS backend is chosen, in some case the VRFID value is
being assigned the value of the NSID. Within the perimeter of that work,
this is why the vrf_lookup_by_table function is extended with a new
parameter.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
peer->ifindex was only used in two places but it was never populated so
neither of them worked as they should. 'struct peer' also has a 'struct
interface' pointer which we can use to get the ifindex.
In the future we are going to have a rule_notify_owner
so make the distinction between the two types of notification
clearer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'struct route_entry *old' and 'struct route_entry *new' can sometimes
be the same route type( for a route replace ), so when we are checking
to see if a new owner has taken over, don't tell the owner it is
replacing it self.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
Add a bit more detail to tell us what we are sending
up to a protocol so we can debug it better in the
future.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The notification of the owner was not properly decoding
the prefix and as such we were not properly reading the
table it was installed into.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* 2 for errors
* 1 for warnings
* 0 for clean
* Suppress all report text for a clean result
* Remove check for const structs from perl script
* Remove grep suppression for that check from shell script
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Unlike Linux we do require the GPL file header
* When checking for spaces between function names and parentheses,
ignore all-uppercase function names as these are likely to be macros,
and function-like macros may have that space
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Update the centos7 build instructions to include
data on how to build w/ systemd. This is especially
useful because we tell the user to install the frr.service
file and the frr.service file expects systemd integration
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Because checkpatch result is applied to original and new file, the
analysis also parses what may be wrong with the original file.
Whereas the script should limit to analyse only what is wrong on new
file.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Some of the tables are no longer stored in the zvrf
and in the zns now. On shutdown zns is cleaned up
after vrf( and rightly so!) As such we should not
attempt to count the information if we don't have
a zvrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
With the ability of zebra to handle random tables,
add code to display those tables via the
show <ip|ipv6> route table (1-...) [json] command.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The linux kernel allows a vast expanse of tables to be used.
It would be useful for zebra to track these tables if they
are being used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The other_tables data structure does not belong to a vrf.
It belongs to the zns. This is because each vrf does not
need to have copies of each of other_tables.
Additionally move the array into a RB_TREE. This will allow
us to sort quickly and easily expand the number of tables
we can support to beyond the ZEBRA_KERNEL_TABLE_MAX define.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* Send reports to stderr; this allows you to get just the end result by
redirecting stderr
* Don't attempt to copy nonexistent files
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Problem seen when a prefix was learned with nexthops from multiple
route sources (static and ospf in this case) and the link to that
nexthop flaps. The nht entry was incorrectly deleted so when the
link came back up the static was not re-installed correctly.
Ticket: CM-19675
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Incorrect check for sentinel value effectively caused peers to sometimes
use the keepalive timer value of other peers, which sometimes led to
hold timer expiry.
Signed-off-by: Quentin Young <qlyoung@qlyoung.net>
This commit is the implementation of weak multicast traceroute.
It consists of IGMP module dealing with mtrace type IGMP messages
and client program mtrace/mtracebis for initiating mtrace queries.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
When a BGP-labeled route is resolved into an LDP-labeled IGP route,
zebra would install it with no labels in the kernel. This patch implements
recursive MPLS labels, i.e. make zebra install all labels from the route's
nexthop chain (the labels from the top-level nexthop being installed in
the top of the MPLS label stack). Multiple recursion levels are supported.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
- Lan Adjacency TLVs was incorrectly formatted due to an error in
TLV size computation. Add new macro to fix this issue
- Update SR link nexthop when it corresponds to an LAN Adj SID. The nexthop
is set to the router id in the TLVi (as per draft), but we need the neighbor
IP address to set the corresponding MPLS LFIB entry
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The value 'pnt' was being set but never used. If we need
this in the future it will be a simple thing to add back
in.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The circuit->area value is always true in every code path
to isis_circuit_af_set( isis_vty.c ). Therefore was_enabled
will always be true.
If was_enabled ever became false then the area->ip_circuits
and area->ipv6_circuits lines would segfault.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Under a BGP VRF instance, prevent from entering in vrf-policy mode. This
mode is reserved for non VRF instances that want to handle several VRF
at the same time.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This worked for unnumbered peers but not for numbered peers. This is
before the fix:
router bgp 100
coalesce-time 1000
neighbor FOO peer-group
neighbor FOO remote-as external
neighbor swp1 interface peer-group FOO
neighbor 1.1.1.1 peer-group FOO
!
line vty
exec-timeout 0 0
!
end
cel-redxp-10# wr
Note: this version of vtysh never writes vtysh.conf
Building Configuration...
Integrated configuration saved to /etc/frr/frr.conf
[OK]
cel-redxp-10# conf t
cel-redxp-10(config)# router bgp
cel-redxp-10(config-router)# no neighbor swp1 interface peer-group FOO
cel-redxp-10(config-router)# no neighbor 1.1.1.1 peer-group FOO
cel-redxp-10(config-router)# do show run
Building configuration...
Current configuration:
!
frr version 4.1-dev
frr defaults datacenter
hostname cel-redxp-10
!
service integrated-vtysh-config
!
password cn321
!
log syslog
!
router bgp 100
coalesce-time 1000
neighbor FOO peer-group
neighbor FOO remote-as external
neighbor 1.1.1.1 remote-as external
!
address-family ipv4 unicast
no neighbor 1.1.1.1 activate
exit-address-family
!
line vty
exec-timeout 0 0
!
end
cel-redxp-10(config-router)#
After the fix "no neighbor 1.1.1.1 peer-group FOO" removes the 1.1.1.1
neighbor.
