Impose a configurable limit on the number of route updates
that can be queued towards the dataplane subsystem.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Correct use of netlink_parse_info() in the netlink fuzzing path.
Also clarify a couple of comments about pthreads.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
We need a bit of special handling for system routes, which need
to be offered for redistribution even though they won't be
passing through the dplane system.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Set SELECTED re immediately in rib_process, without expecting
that fib install has completed. Remove premature redistribute
call also.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Reduce or eliminate use of global zebra_ns structs in
a couple of netlink/kernel code paths, so that those paths
can potentially be made asynch eventually.
Slide netlink_talk_info into place to remove dependency on core
zebra structs; add accessors for dplane context block
Start init of route context from zebra core re and rn structs;
start queueing and event handling for incoming route updates.
Expose netlink apis that don't rely on zebra core structs;
add parallel route-update code path using the dplane ctx;
simplest possible event loop to process queued route'
updates.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The `struct zebra_ns` data structure is being used
for both router information as well as support for
the vrf backend( as appropriate ). This is a confusing
state. Start the movement of `struct zebra_ns` into
2 things `struct zebra_router` and `struct zebra_ns`.
In this new regime `struct zebra_router` is purely
for handling data about the router. It has no knowledge
of the underlying representation of the Data Plane.
`struct zebra_ns` becomes a linux specific bit of code
that allows us to handle the vrf backend and is allowed
to have knowledge about underlying data plane constructs.
When someone implements a *bsd backend the zebra_vrf data
structure will need to be abstracted to take advantage of this
instead of relying on zebra_ns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
During a debugging session last night I discovered that I was
still having some `fun` figuring out why zebra was not making
a route's nexthop active. After some debugging I figured out
that I was missing some states that we could end up in that
didn't have debug information about what happened in nexthop_active.
Add the missing breadcrumbs for nexthop resolution. In addition
add a bit of code to notice the ebgp state without recursion turned
on and to let the user know about it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
on some cases, kernel routes are not selected, because the kernel
suppressed it without informing the netlink layer that the route has
been suppressed ( for instance, when an interface goes down, the route
never goes back when interface goes up again). This commit intends to
suppress that entry from zebra.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Work to handle the route-maps, namely the header changes in zebra_vrf.h
and the mapping of using that everywhere
Signed-off-by: vishaldhingra vdhingra@vmware.com
Wrapper the get/set of the table->info pointer so that
people are not directly accessing this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Debugging inactive nexthops in zebra can be quite difficult
and non-obvious what has gone wrong. Add detailed rib
debugs for the cases where we decide that a nexthop is
inactive so that we can more easily debug a reason
for the failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The _route_entry_dump function was not handling the nexthop as passed
in from an upper level protocol appropriate and as such not displaying
the v4/v6 nexthop right in the case where we have both going.
Additionally dump the nexthop vrf as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For OpenFabric operation, we need to be able to install routes via
interfaces without any IPv4 addresses configured. Introduce a flag
ZEBRA_FLAG_ONLINK which upper protocols can set on a route they send
towards zebra, to force the nexthops to be considered onlink.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
* Check for the modified routemap in zebra_route_map_process_update_cb()
* Added zebra_rib_table_rm_update() for RIB routemap processing
* Added zebra_nht_rm_update() for NHT routemap processing
Signed-off-by: kssoman <somanks@vmware.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow protocols to specify to zebra that they would like zebra
to use the distance passed down as part of determine sameness for
Route Replace semantics.
This will be used by the static daemon to allow it to have
backup static routes with greater distances.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This is the start of separating out the static
handling code from zebra -> staticd. This will
help simplify the zebra code and isolate static
route handling to it's own code base.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Commit a2ca67d1d2 consolidated IPv4 and IPv6 handling. It also applied
our ignorance for IPv4 srcdest routes onto IPv6.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Add 'const' to prefix args to several zebra route update,
redistribution, and route owner notification apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a bit of code to allow return of data plane
request messages.
Add the ability to pass the result back to callers
of kernel_route_rib.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The SOUTHBOUND_XXX enum was named a bit poorly.
Let's use a bit better name for what we are trying to do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add to zebra route-maps the ability to match on a source-instance
route-map FOO deny 55
match source-instance 5
route-map FOO permit 60
ip protocol any route-map FOO
This will match any protocol route installation with a source-instance of 5.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ensure that when EVPN routes are installed into zebra, the router MAC
is passed per next hop and appropriately handled. This is required for
proper multipath operation.
Ticket: CM-18999
Reviewed By:
Testing Done: Verified failed scenario, other manual tests
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
zserv.c has become something of a dumping ground for everything vaguely
related to ZAPI and really needs some love. This change splits out the
code fo building and consuming ZAPI messages into a separate source
file, leaving the actual session and client lifecycle code in zserv.c.
Unfortunately since the #include situation in Zebra has not been paid
much attention I was forced to fix the headers in a lot of other source
files. This is a net improvement overall though.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The code to reinstall self originated routes was not behaving
correctly. For some reason we were looking for self originated
routes from the kernel to be of type KERNEL. This was probably
missed when we started installing the route types. We should
depend on the self originated flag that we determine from
the callback from the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
There were a few cases where we were not properly de-registering
the static nexthops passed to us. This was important when
the static route was being removed for whatever reason that
we did not leave slag for the nexthop tracking.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
PR #1739 added code to leak routes between (default VRF) VPN safi and unicast RIBs in any VRF. That set of changes included temporary CLI including vpn-policy blocks to specify RD/RT/label/&c. After considerable discussion, we arrived at a consensus CLI shown below.
The code of this PR implements the vpn-specific parts of this syntax:
router bgp <as> [vrf <FOO>]
address-family <afi> unicast
rd (vpn|evpn) export (AS:NN | IP:nn)
label (vpn|evpn) export (0..1048575)
rt (vpn|evpn) (import|export|both) RTLIST...
nexthop vpn (import|export) (A.B.C.D | X:X::X:X)
route-map (vpn|evpn|vrf NAME) (import|export) MAP
[no] import|export [vpn|evpn|evpn8]
[no] import|export vrf NAME
User documentation of the vpn-specific parts of the above syntax is in PR #1937
Signed-off-by: G. Paul Ziemba <paulz@labn.net>
the rib_wib_table function was uncalled by anyone remove
and additionally remove it's static function it called.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we receive an arbitrary table over the netlink bus
save it for later perusal and sweep any routes that
we may have created from an earlier run.
The current redistribute code is limited to
ZEBRA_KERNEL_TABLE_MAX. I left this alone for the
moment because I believe it needs to be converted
to a RB tree instead of a flat array. Which is more
work for the future. Additionally this proposed
change might necessitate some cli changes or rethinks.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
It is possible for clients to install routes into tables
that they desire. Modify the code to delete these routes
from these tables as well.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There were several places where when I am attempting
to debug zebra functionality that I would really
like to have the ability to know what vrf I think
I am operating on.
Add the vrf_id to a bunch of zlog_debug messages
to help figure out issues when they happen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Also modify `struct route_entry` to use nexthop_groups.
Move ALL_NEXTHOPS loop to nexthop_group.h
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
If a interested party removes one of it's routes let
it know that it has happened as asked for.
Add a ZAPI_ROUTE_REMOVED to the send of the route_notify_owner
Add a ZAPI_ROUTE_REMOVE_FAIL to the send of the route_notify_owner
Add code in sharpd to notice this and to allow it to keep
track of routes removed for that invocation and give timing
results.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement support for EVPN symmetric routing for IPv6 routes. The next hop
for EVPN routes is the IP address of the remote VTEP which is only an IPv4
address. This means that for IPv6 symmetric routing, there will be IPv6
destinations with IPv4 next hops. To make this work, the IPv4 next hops are
converted into IPv4-mapped IPv6 addresses.
As part of support, ensure that "L3" route-targets are not announced with
IPv6 link-local addresses so that they won't be installed in the routing
table.
Signed-off-by: Vivek Venkatraman vivek@cumulusnetworks.com
Reviewed-by: Mitesh Kanjariya mitesh@cumulusnetworks.com
Reviewed-by: Donald Sharp sharpd@cumulusnetworks.com
The ZEBRA_FLAG_INTERNAL flag is used to signal to zebra that
the route being added, the nexthops for it can be recursively
resolved. This name keeps throwing me off when I read it
so let's rename to something that allows the developer to
understand what is going on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'struct route_entry *old' and 'struct route_entry *new' can sometimes
be the same route type( for a route replace ), so when we are checking
to see if a new owner has taken over, don't tell the owner it is
replacing it self.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com.
Some of the tables are no longer stored in the zvrf
and in the zns now. On shutdown zns is cleaned up
after vrf( and rightly so!) As such we should not
attempt to count the information if we don't have
a zvrf.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem seen when a prefix was learned with nexthops from multiple
route sources (static and ospf in this case) and the link to that
nexthop flaps. The nht entry was incorrectly deleted so when the
link came back up the static was not re-installed correctly.
Ticket: CM-19675
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
The nh_resolve_via_default function is an accessor function
for NHT in zebra. Let's move this function to it's proper
place.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a rib_unlink() event is directly called for a
route_entry we need to see if the dest->selected_fib
is the same and just unset the dest->selected_fib.
This was happening for redistributed table 10 routes
into BGP.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The dest->selected_fib assignment needs to happen
after the install and should be controlled by
the southbound api return of success or failure.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The route_node that we are working on is going to be interesting
to the kernel_route_rib_pass_fail. So I am setting up the
code to allow me to pass it. This will be done in a subsuquent
commit.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a nexthop is resolved via a label based nexthop, copy
the labels into the newly created recursive nexthop.
Please note that this does not fix the case where we
have a label based nexthop that is recursively resolved
through *another* nexthop that is also label based.
In this case we need to create a new label stack
for those routes.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Allow this to work:
vrf DONNA
ip route 4.3.2.1/32 192.168.1.5 nexthop-vrf EVA
The static route code was not properly telling the
nexthop resolution code what vrf to use.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are handling nexthops in zebra, use the appropriate
vrf to figure out if the nexthops are active or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add to the rib_add function the ability to pass in the nexthops
vrf.
Additionally when we decode the netlink message from the linux
kernel, properly figure out the nexthops vrf_id.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
With VRF route-leaking we need to know what vrf
the nexthops are in compared to this vrf. This
code adds the nh_vrf_id to the route entry and
sets it up correctly for the non-route-leaking
case.
The assumption here is that future commits
will make the nh_vrf_id *different* than
the vrf_id.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The rn can not have an rn->info pointer and as
such the dest may be NULL. Don't assign
the old_fib pointer if so. This is ok
because we know RNODE_FOREACH... will not
iterate if dest is NULL.
Fixes: #1575
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Linux has the ability to support a concept of 'realms'.
This concept allows you to mark routes with a realm id
value of 1-255. If you have marked the realm
of a route then you can use the tc program to
apply policy to the routes.
This commit adds the ability of FRR to interpret
a tag from (1-255) as a realm when installing into
the kernel. Please note that at this point in time
there is no way to set policy from within FRR. This
must be done outside of it.
The normal methodology for setting tags is valid here
via a route-map.
Finally this is only applied if the --enable-realms configure
option is applied.
Signed-off-by: Kaloyan Kovachev <kkovachev@varna.net>
The SELECTED_FIB flag was placed upon the entry that we
have inserted into the kernel. Remove this flag and replace
with a `rib_dest_t` *selected_fib. Just keep track of the
selected_fib as we modify it. This removes allot of
FOREACH_RE loops as that we do not need to find the
entry anymore.
At this point in time I think this is a very minor performance
boost. Most `rib_dest_t` structures do not typically carry
more than 1 route_entry, but the minute you start having more
than one entry you can and will start having significant processing
time spent finding the selected_fib.
A future commit may re-order the route entries and possibly
keep more pointers on `rib_dest_t` to avoid lookup. This
is a bit tricky because of the FIB_OVERRIDE code.
Signed-off-by Donald Sharp <sharpd@cumulusnetworks.com>
