an interface rmap context can be created from a custom name string,
instead of a vrf. This ability permits to handle several instances of
interface route map in the same vrf. The naming convention will be
transparent on what the name is for in the daemon code.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
so as to handle ri/ripng/eigrp multiple instances, the need is to
encapsulate if_rmap hash table into a container context self to each
instance. This work then reviews the if_rmap api, mainly by adding a
if_rmap_ctx context, that is passed for each exchange between library
and the daemon.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
a distribute_ctx context pointer is returned after initialisation to the
calling daemon. this context pointer will be further used to do
discussion with distribute service. Today, there is no specific problem
with old api, since the pointer is the same in all the memory process.
but the pointer will be different if we have multiple instances. Right
now, this is not the case, but if that happens, that work will be used
for that.
distribute-list initialisation is split in two. the vty initialisation
is done at global level, while the context initialisation is done for
each routing daemon instance.
babel daemon is being equipped with a routing returning the main babel
instance.
also, a delete routine is available when the daemon routing instance is
suppressed.
a list of contexts is used inside distribute_list. This will permit
distribute_list utility to handle in the same daemon to handle more than
one context. This will be very useful in the vrf context.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Implement the 'authentication-failure' and 'authentication-type-failure'
notifications defined in the frr-ripd YANG module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This command deletes all received routes from the RIP routing table.
It should be used with caution as it can create black holes in the
network until RIP reconverges. Very useful to make automated testing
(e.g. ANVL) more predictable, since the internal state of ripd can be
cleared after each test.
Implement the command using a YANG RPC so that it can be executed by
other northbound clients in addition to the CLI.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
We can now leverage the new northbound API to perform a full configuration
reload in ripd without the need for external help (i.e. frr-reload.py).
When vty_read_config() is called with the 'config' parameter set to
NULL, it performs a new configuration transaction where the running
configuration is *replaced* by the provided configuration file. With that
said, we don't need to do anything other than calling this function in
the SIGHUP handler of all FRR daemons. If a daemon hasn't been converted
to the new northbound model, vty_read_config() will simply *merge*
the configuration file into the running configuration.
The calls to rip_clean() and rip_reset() in the SIGUP handler were
changing configuration variables directly, bypassing the northbound
layer. Configuration variables should be changed only by the northbound
callbacks, and failure to respect that inevitably leads to inconsistencies
and crashes. Fix this.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Now that "router rip" and all underlying commands were converted to the
new northbound model, there's no need to use the qobj infrastructure to
keep track of the 'rip' global variable anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Trivial conversion. Use the northbound 'apply_finish()' callback so
we'll call rip_event() only once even if we change the three RIP timers
at the same time.
Convert the timers to uint32_t to match their representation in the
YANG model.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Trivial conversion. Remove the rip->route routing table and associated
code because this variable was used only to show the running
configuration.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Trivial conversion. As usual, combine multiple DEFUNs into a single
DEFPY for simplicity.
As a bonus of the northbound conversion, this commit fixes the
redistribution of certain protocols into ripd. The 'redist_type' array
used by the "redistribute" commands was terribly outdated, which was
preventing the CLI to parse correctly certain protocols like isis
and babel.
Remove the route_map hooks installed by rip_route_map_init() since they
were redundant (rip_init() already takes care of that).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
In ripd, the "passive-interface default" command has the following
behavior:
* All interfaces are converted to the passive mode;
* The "passive-interface IFNAME" command becomes a no-operation and
"passive-interface IFNAME" statements are removed from the running
configuration.
* The "no passive-interface IFNAME" can be used to remove interfaces
from the passive mode.
This command was modeled using the following YANG data nodes in the
frr-ripd module:
leaf passive-default {
type boolean;
default "false";
description
"Control whether interfaces are in the passive mode
by default or not.";
}
leaf-list passive-interface {
when "../passive-default = 'false'";
type string {
length "1..16";
}
description
"A list of interfaces where the sending of RIP packets
is disabled.";
}
leaf-list non-passive-interface {
when "../passive-default = 'true'";
type string {
length "1..16";
}
description
"A list of interfaces where the sending of RIP packets
is enabled.";
}
The 'when' statements guarantee that the list of passive interfaces
is cleared when the "passive-interface default" command is entered
(likewise, they guarantee that the list of non-passive interfaces is
cleared when the "passive-interface default" command is removed). This
matches exactly the behavior we want to model.
Finally, move the 'passive_default' global variable into the
'rip' structure where it belongs. This fixed the bug where the
"passive-interface default" command was being retained after a "no router
rip" + "router rip".
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Remove the rip_offset_list_set() and rip_offset_list_unset() functions
since they set/unset multiple configuration options at the same time. The
northbound callbacks need to set/unset configuration options individually.
The frr-ripd YANG module models the "offset-list" command using a list
keyed by the 'interface' and 'direction' leafs. One important detail is
that the IFNAME parameter is optional, and when it's not present it means
we want to match all interfaces. This is modeled using an interface name
of '*' since key lists are mandatory by definition in YANG.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The frr-ripd YANG module models the ripd "network" command using two
separate leaf-lists for simplicity: one leaf-list for interfaces and
another leaf-list for actual networks. In the 'cli_show' callbacks,
display the "network" command for entries of both leaf-lists.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The "distance (1-255) A.B.C.D/M [WORD]" command was modeled using a
YANG list, which makes it a little bit more complicated to convert to
the new northbound model.
The rip_distance_set() and rip_distance_unset() functions were removed
since they set/unset multiple configuration options at the same time. The
northbound callbacks need to set/unset configuration options individually.
When a distance list is created, use yang_dnode_set_entry() to store
a pointer in the configuration node, and retrieve this pointer in the
other callbacks using yang_dnode_get_entry().
The 'rip_distance' structure was moved to ripd.h so that it can be used
in the rip_northbound.c file.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Trivial conversion.
rip->default_metric was converted to an uint8_t to match the way it's
defined in the YANG module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Trivial conversion.
'rip->default_information_route_map' was removed since it wasn't being
used anywhere.
'rip->default_information' was removed too because it was being used only
to display the running configuration and thus is not necessary anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Trivial conversion. The rip->ecmp variable was converted to a boolean to
match the way it's defined in the YANG module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Implement the northbound callbacks associated to the
'/frr-ripd:ripd/instance' YANG path (the code is mostly a copy and paste
from the original "router rip" DEFUNs);
* Move rip_create_socket() out of rip_create() since creating a socket
is an error-prone operation and thus needs to be performed separately
during the NB_EV_PREPARE phase;
* On rip_create(), fetch the defaults from the frr-ripd YANG model;
* Convert the "[no] router rip" CLI commands to be dumb wrappers around
the northbound callbacks;
* On config_write_rip(), write logic to call all 'cli_show' northbound
callbacks defined under the '/frr-ripd:ripd/instance' YANG path.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
fix a bug when sending packets.
in authenticate mode but without any string,
no packet should send.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
fix a bug when sending a rip packet.
in authenticate mode but without any string,
no packet should send.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
Fix ripd crash of null pointer.
when authenticate a rip packet,
the key pointer or the key string pointer may be null,
the code have to return then.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
This fix a crash of null pointer.
when we don't add a key string or delete it,
the key is not null but key string is null,
so the code have to return.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
Coverity SA has noticed that we are not ignoring the return
codes from rip_send_packet in one case. Since we do not care
let the system know we don't.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This commit fixes these three issues:
1) rinfo is used for rip packet sending not tmp_rinfo
2) With RIP_SPLIT_HORIZON and an interface with more than 1 ip addresses
we will not send the routes out an interface that they originate on
3) With RIP_SPLIT_HORIZON_POISONED_REVERSE and an interface with
more than 1 ip address we will not send out ipA with a metric of 16
and ipb with a metric of 1. Both will be 16 now.
Signed-off-by: lyq140 <34637052+lyq140@users.noreply.github.com>
The code was attempting to access a variable that would always be NULL.
In fact this code has been broken since the rip ECMP changes
were put into place a few years back.
I'm going to come straight out and say that I don't fully
understand this code. rinfo is the first item in the ecmp
list and tmp_rinfo is used to iterate over all the items
in the ecmp list. It sure looks like that the changes
made here were just hacked together. So I modified
the tmp_rinfo loop to just work on tmp_rinfo and
the check that was crashing I modified to just use
the rinfo since that what was checked originally
in code before the ECMP was added. So consider
this a hack job to stop the crashing.
I think worse case is that we might be sending some routes
back out interfaces it shouldn't be if you have
ip rip split-horizon poisoned-reverse configured but
that is less bad(tm) than crashing.
Fixes: #1717
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The rinfo variable was being set but never used.
We just need to call rip_ecmp_replace or rip_ecmp_add
this function does not care about the return values
because the rinfo returned is stored on the rip
route entry.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
