3 new gre commands are available:
- GRE_GET to permit a daemon to retrieve gre information.
- GRE_UPDATe is the reply message from zebra to the daemon. as it is a
syncronous request, the GRE_GET expected will have to match the vrf id
where the gre information is wished. this has an impact on label
manager with change in APIs.
- SET_GRE_SOURCE. this command will be stubbed for now, assuming that
the gre interface is set accordingly by external script.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
zebra is able to get information about gre tunnels.
zebra_gre file is created to handle hooks, but is not yet used.
also, debug zebra gre command is done to add gre traces.
A zebra_gre file is used for complementary actions that may be needed.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
when zebra has vrf backend mapped to namespaces, the polling
of interfaces leads to fix all linkages of interfaces. This
was not done on non default namespace. do it for other namespaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
There are cases where either link information is not present at
interface creation or link information changed. handle this
situation.
Signed-off-by: Philippe.Guibert <philippe.guibert@6wind.com>
zebra dd link
As pointed out on code review of BGP extended messages, increasing the
maximum BGP message size has the consequence of growing the dynamically
sized stack buffer up to 650K. While unlikely to exceed modern stack
sizes it is still unreasonably large. Remedy this with a heap buffer.
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Description:
This looks broken after NB changes in routemap. When routemap
action modified from permit to deny, it is expected to apply
the new action on the filtered routes before the action in the
routemap data structure has been changed. But currently this is
not handled by the corresponding northbound API.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Currently the operational data is used for two things:
- to inherit the is-type from the isis instance
- to set passive flag for loopback interfaces
This commit implements the first one using only the config data.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We need to delete isis config from interfaces when we delete the isis
router instance. This should be done using only config data.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
YANG model and CLI commands allow user to configure LDP-sync per area.
But the actual implementation is incorrect - all commands are changing
the config for the whole VRF instead of a single area. This commit fixes
this issue by actually implementing per area configuration.
Fixes#8578.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently we don't allow to configure the interface before the area is
configured. This approach has the following issues:
1. The area config can be deleted even when we have an interface config
relying on it. The code is not ready for that - we'll have a whole
bunch of stale pointers if user does that.
2. The code doesn't correctly process the event of changing the VRF for
an interface. There is no mechanism to ensure that the area exists
in the new VRF so currently the circuit still stays in the old VRF.
This commit allows an arbitrary order of area/interface configuration.
There is no more need to configure the area before configuring the
interface.
This change fixes both the issues.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Call from isis_circuit_create works only if we enable isis on an already
existing interface. If we configure isis on a pseudo interface and then
actually create it - this call doesn't work.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Necessary structures for snmp-id generation are currently stored in
`struct isis`. When we generate the new circuit ID, we always use the
instance from the default VRF. When we free the circuit ID, we use the
instance from the circuit VRF. This causes the following problems:
1. If there is no instance in the default VRF, this code doesn't work.
2. When circuit in non-default VRF is deleted, the ID is not actually
freed.
This is fixed by using global structures instead. The code itself is
moved to isis_snmp.c and linked to the main code using hooks. We should
not call SNMP-related code when the SNMP module is not loaded at all.
More than that, we don't allow to activate the circuit if we failed to
generate the SNMP ID. Even if SNMP support is completely disabled! This
check is removed.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
This change allows the user to only log the message header and not
include all the LSAs in each packet. In a large setup printing out
all the LSAs in each packet can make the system very hard to debug.
When the user finds an issue with the adjacency not coming up or in a
specific packet type they can turn on a full dump of the message.
Signed-off-by: Lynne Morrison <lynne@voltanet.io>
a) `debug zebra kernel` turns off `debug zebra kernel msgdump....`
this is odd and bad
b) `debug zebra kernel msgdump send` turns off receive and vice versa
this is counter intuitive as well
c) `no zebra kernel msgdump ...` turns off all kernel level debugging
we should only turn off msgdump specific debugs
d) `no debug zebra kernel` turns off all kernel level debugging
we should leave msgdump on.
e) Fix `show run` and show debug output
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The remove lsp command was using the wrong list of route
protocols - use the ZEBRA list, same as the other clis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Description:
DR information is missing under "show ip ospf interface [json]".
Added DR infomation to display in "show ip ospf interface".
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
The output of "show ipv6 ospf6 route json" was not in the same
format as "show ip ospf route json". Currently ipv6 and ipv4 route
tables as well as ospfv2 have prefix as the key, but the same
is not true for ospfv3.
The structure of the json objects needs to be changed.
Currently the structure present is
frr(config-ospf6)# do show ipv6 ospf6 route json
{
"routes":[
{
"destination":"66:ff::\/64",
"isBestRoute":true,
"destinationType":"N",
"pathType":"IA",
"duration":"00:00:06",
"nextHops":[
{
"nextHop":"::",
"interfaceName":"ens256"
}
]
}
]
}
It is changed to:
frr(config-ospf6)# do show ipv6 ospf6 route json
{
"routes":{
"12::2\/128":{
"isBestRoute":true,
"destinationType":"N",
"pathType":"IA",
"duration":"00:01:22",
"nextHops":[
{
"nextHop":"::",
"interfaceName":"ens192"
}
]
}
}
Signed-off-by: Yash Ranjan <ranjany@vmware.com>
Also
- update info about new packages needed as libcares.
- create proper links to libyang so ld can find the lib.
Signed-off-by: Javier Garcia <javier.garcia@voltanet.io>
encoding signed int as unsigned is bad practice; since we want to do
it here lets at least be explicit about it
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
Use unsigned value for all RA requests to Zebra
- encoding signed int as unsigned is bad practice
- RA interval is never, and should never be, negative
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
This is always a 16 bit unsigned value.
- signed int is the wrong type to use
- encoding a signed int as a uint32 is bad practice
- decoding a signed int encoded as a uint32 into a uint16 is bad
practice
Signed-off-by: Quentin Young <qlyoung@nvidia.com>
This fixes 2 asan errors:
If we only have a TLV_ROUTER_ADDR don't continue after we skipped it.
Fixed length when parsing EXT_TLV_LINK_SIZE.
Signed-off-by: Erik Kooistra <me@erikkooistra.nl>
The current log prints maximum wait time which is not actually correct,
because it doesn't include the command execution time. We usually have
"failed after X seconds" log with X being far longer than this maximum.
Let's print the maximum number of tries instead.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
