When an ES is deleted and re-added bgpd can start sending MAC-IP sync updates
before the dataplane and zebra have setup the VLAN membership for the ES. Such
MAC entries are not installed in the dataplane till the ES-EVI is created.
Ticket: #2668488
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
In the window immediately after an ES deletion bgpd can send MAC-IP updates
using that ES. Zebra needs to ignore these updates to prevent creation
of stale entries.
Ticket: #2668488
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
This addresses deletion of ES interfaces that are were not completely
configured.
Ticket: #2668488
Signed-off-by: Anuradha Karuppiah <anuradhak@nvidia.com>
This script is failing occassionally in our upstream topotests.
Where it was changing route-maps and attempting to see if
summarization was working correctly. The problem was that
the code appeared to be attempting to add route-maps to
redistribution in ospf then modifying the route-maps behavior
to affect summarization as well as the metric type of that
summarization.
The problem is of course that ospf does not appear to modify
the summary routes metric-type when the components
of that summary change it's metric-type. So the test
is testing nothing. In addition the test had messed
up the usage of the route-map generation code and all
the generated config was in different sequence numbers
but route-map processing would never get to those
new sequence numbers because of how route-maps are processed.
Let's just remove this part of the test instead of trying
to unwind it into anything meaningfull
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Several tests used the route_map_create functionality
with `metric-type` but never bothered to add the
backend code to ensure it works correctly.
Add it in so it can be used.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Sphinx tries to parse :c:function: as function prototype, which doesn't
quite work with macros.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Sphinx warns about a few nits here, just fix. (Note :option:`-E` can't
be used without a "option:: -E" definition, it's intended as a cross
reference.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
```
exit1-debian-9# show ip route 172.16.16.1/32
Routing entry for 172.16.16.1/32
Known via "bgp", distance 20, metric 0, best
Last update 00:00:28 ago
* 192.168.0.2, via eth1, weight 1
AS-Path : 65003
Communities : first 65001:2 65001:3
Large-Communities: 65001:1:1 65001:1:2 65001:1:3
Selection reason : First path received
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
the variable n, when used must have been set via the find_route_slot
but the compiler in question is probably getting confused with the
multiple levels of indention. Just get around the whole problem
by setting n = 0 and being done with it.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Convert a signed value to a time_t before addition
so that we can compare unsigned (time_t) to unsigned.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We have this pattern in this test:
# Let's kill the interface on rt2 and see what happens with the RIB and BFD on rt1
tgen.gears["rt2"].link_enable("eth-rt1", enabled=False)
# By default BFD provides a recovery time of 900ms plus jitter, so let's wait
# initial 2 seconds to let the CI not suffer.
topotest.sleep(2, 'Wait for BFD down notification')
router_compare_json_output(
"rt1", "show ip route ospf json", "step3/show_ip_route_rt2_down.ref", 1, 0
)
Under a heavy CI load, interface down events and then reacting to them may not actually
happen within 2 seconds. Allow some more grace time in the test to ensure that we
react to it in an appropriate manner.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
To ensure this, add a const modifier to functions' arguments. Would be
great do this initially and avoid this large code change, but better
late than never.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
OSPF when it is deciding on whom it should elect for DR and backup
has a process that prioritizes network stabilty over the exact
same results of who is the DR / Backups.
Essentially if we have r1 ----- r2
Let's say r1 has a higher priority, but r2 comes up first, starts
sending hello packets and then decides that it is the DR. At some
point in time in the future, r1 comes up and then connects to r2
at that point it sees that r2 has elected itself DR and it keeps
it that way.
This is by design of the system. With our tight ospf timers as
well as high load being experienced on our test systems. There
exists a bunch of ospf tests that we cannot guarantee that a
consistent DR will be elected for the test. As such let's not
even pretend that we care a bunch and just look for `Full`.
If we care about `ordering` we need to spend more time getting
the tests to actually start routers, ensure that htey are up and
running in the right order so that priority can take place.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The `show ip ospf neighbor json` command was displaying
state:`Full\/DR`
Where state was both the role and whether or not the neigbhor
was converged. While from a OSPF perspective this is the state.
This state is a combination of two things.
This creates a problem in testing because we have no guarantee
that a particular ospf router will actually have a particular role
given how loaded our topotest systems are. So add a bit of json
output to display both the converged status as well as the
role this router is playing on this neighbor/interface.
The above becomes:
state:`Full\/DR`
converged:`Full`
role:`DR`
Tests can now be modified to look for `Full` and allow it to
continue. Most of the tests do not actually care if this
router is the DR or Backup.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The switch statement over `enum zebra_link_type` had a default
and FRR was missing a few of the pre-defined types we cared about.
Remove the default statement and add the missing values.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Commit 3551ee9e90304 introduced a regression that causes GR to fail
under certain circumstances. In short, while ISM events should
be ignored while acting as a helper for a restarting router, the
DR/BDR fields of the neighbor structure should still be updated
while processing a Hello packet. If that isn't done, it can cause
the helper to elect the wrong DR while exiting from the helper mode,
leading to a situation where there are two DRs for the same network
segment (and a failed GR by consequence). Fix this.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Before starting the graceful restart procedures, ospf_gr_prepare()
verifies for each configured OSPF instance whether it has the opaque
capability enabled (a pre-requisite for GR). If not, a warning is
emitted and GR isn't performed on that instance.
This PR introduces an additional opaque capability check that will
return a CLI error when the opaque capability isn't enabled. The
idea is to make it easier for the user to identify when the GR
activation has failed, instead of requiring him or her to check
the logs for errors.
The original opaque capability check from ospf_gr_prepare() was
retaining as it's possible that that function might be called from
other contexts in the future.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The ospfd opaque LSA infrastruture has an issue where it can't store
different versions of the same Type-9 LSA for different interfaces.
When flushing the self-originated Grace-LSAs upon exiting from the GR
mode, the code was looking up the single self-originated Grace-LSA
from the LSDB, setting its age to MaxAge and sending it out on all
interfaces.
The problem is that Grace-LSAs sent on broadcast interfaces have
their own unique "IP interface address" TLV that is used to identify
the restarting router. That way, just reusing the same Grace-LSA for
all interfaces doesn't work.
Fix this by generating a new Grace-LSA with its age manually set
to MaxAge whenever one needs to be flushed. This will allow the "IP
interface address" TLV to be set correctly and make GR work even in
the presence of multiple broadcast interfaces.
In the long term, the opaque LSA infrastructure should be updated
to support Type-9 link-local LSAs correctly so that we don't need to
resort to hacks like this.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When building clippy we must have python 3. Let's
ensure that we test for it and stop the auto-make
if it is not installed on the system.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
