When configuring v6 static routes, allow it to gracefully
ignore mpls commands when mpls is not turned on in the kernel.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When mpls is not turned on in the kernel, we
are not installing the mpls commands into the cli.
This results in vtysh attempting to run the command
and receiving a 'WTF is this command' back from zebra.
Modify the mpls code to install commands and to check
to see if the command should be accepted based
upon mpls working or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This patch improves zebra,ripd,ripngd,ospfd and bgpd so that they can
make use of 32-bit route tags in the case of zebra,ospf,bgp or 16-bit
route-tags in the case of ripd,ripngd.
It is based on the following patch:
commit d25764028829a3a30cdbabe85f32408a63cccadf
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jul 1 14:23:45 2016 +0100
*: Widen width of Zserv routing tag field.
But also contains the changes which make this actually useful for all
the daemons.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Added the capability of defining an ipv6 static route to null0,
similar to the support previously in ipv4 only.
Ticket: CM-5794
Signed-off-by: Don Slice
Reviewed By: CCR-5223
Testing Done: Manual tested added to the ticket and bgp and ospf smoke
successfully completed
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree]
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
When pulling forward the zebra_vty.c changes I accidently dropped
these changes from earlier commits.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Refactor the 'no ipv6 route XXXX' commands to
work under the new cli and to collapse the code
to a much smaller set.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Rework the 'no ip route XXXX' commands to use the new cli
and collapse all DEFUN's that we could into a much smaller
set of commands.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Convert all 'ip route XXXX' commands to use the new syntax and
collapse all functions that we can easily do.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Sam Tannous <stannous@cumulusnetworks.com>
Ticket:
FIB override routes are for routing protocols that establish
shortcut routes, or establish point-to-point routes that should
not be redistributed. Namely this is useful NHRP daemon to come.
Zebra is extended to select two entries from RIB the "best" entry
from routing protocols, and the FIB entry to install to kernel.
FIB override routes are never selected as best entry, and thus
are never adverticed to other routing daemons. The best FIB
override, or if it does not exist the otherwise best RIB is
selected as FIB entry to be installed.
Signed-off-by: Timo Teräs <timo.teras@iki.fi>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: Massage to fit cumulus tree]
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
To keep things simple, zebra's code should be the same whether MPLS
is enabled or not. Then, when MPLS is not enabled, we just disable all
MPLS CLI commands. This way we don't need to add a lot of #ifdef cruft
in zebra's core, improving code readability.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This patch installs labeled static routes in the FIB. The routes are installed
using the RTA_ENCAP (and RTA_ENCAP_TYPE) nested attributes.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6040
Reviewed By: CCR-3091
Testing Done: Tested in SE-1, brief manual testing now
Introduce ability to configure static routes with labels. Only supported for
IPv4.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-6040
Reviewed By: CCR-3090
Testing Done: Testing in SE-1
Add support for statically configuring MPLS transit LSPs. This allows the
configuration of ILM to one or more NHLFE, as defined in RFC 3031. The
currently supported nexthop types are IPv4 or IPv6.
The two label operations supported are swap and PHP; the latter is configured
by specifying the out-label as "implicit-null". Note that the operation is
against the label, so it should be the same for all NHLFEs.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-4804, ...
Reviewed By: CCR-3085
Testing Done: In combination with other patches
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Pass around the vrf_id to rib_match_ipv4_multicast
so that proper lookup can be maintained. Not really
needed yet, but future fixing now.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
