Currently we unconditionally send a prefix through the optimized
route-map codepath if the v4 and v6 LPM tables have been allocated and
optimization has not been disabled.
However prefixes from address-families that are not IPv4/IPv6 unicast
always fail the optimized route-map index lookup, because they occur on
an LPM tree that is IPv4 or IPv6 specific.
e.g.
Even if you have an empty permit route-map clause, Type-3 EVPN routes
are always denied:
```
--config
route-map soo-foo permit 10
--logs
2023/02/17 19:38:42 BGP: [KZK58-6T4Y6] No best match sequence for pfx: [3]:[0]:[32]:[2.2.2.2] in route-map: soo-foo, result: no match
2023/02/17 19:38:42 BGP: [H5AW4-JFYQC] Route-map: soo-foo, prefix: [3]:[0]:[32]:[2.2.2.2], result: deny
```
There is some existing code that creates an AF_INET/AF_INET6 prefix
using the IP/prefix information from a Type-2/5 EVPN route, which
allowed only these two route-types to successfully attempt an LPM lookup
in the route-map optimization trees via the converted prefix.
This commit does 3 things:
1) Reverts to non-optimized route-map lookup for prefixes that are not
AF_INET or AF_INET6.
2) Cleans up the route-map code so that the AF check is part of the
index lookup + the EVPN RT-2/5 -> AF_INET/6 prefix conversion occurs
outside the index lookup.
3) Adds "debug route-map detail" logs to indicate when we attempt to
convert an AF_EVPN prefix into an AF_INET/6 prefix + when we fallback
to a non-optimized lookup.
Additional functionality for optimized lookups of prefixes from other
address-families can be added prior to the index lookup, similar to how
the existing EVPN conversion works today.
New behavior:
```
2023/02/17 21:44:27 BGP: [WYP1M-NE4SY] Converted EVPN prefix [5]:[0]:[32]:[192.0.2.7] into 192.0.2.7/32 for optimized route-map lookup
2023/02/17 21:44:27 BGP: [MT1SJ-WEJQ1] Best match route-map: soo-foo, sequence: 10 for pfx: 192.0.2.7/32, result: match
2023/02/17 21:44:27 BGP: [H5AW4-JFYQC] Route-map: soo-foo, prefix: 192.0.2.7/32, result: permit
2023/02/17 21:44:27 BGP: [WYP1M-NE4SY] Converted EVPN prefix [2]:[0]:[48]:[aa:bb:cc:00:22:22]:[32]:[20.0.0.2] into 20.0.0.2/32 for optimized route-map lookup
2023/02/17 21:44:27 BGP: [MT1SJ-WEJQ1] Best match route-map: soo-foo, sequence: 10 for pfx: 20.0.0.2/32, result: match
2023/02/17 21:44:27 BGP: [H5AW4-JFYQC] Route-map: soo-foo, prefix: 20.0.0.2/32, result: permit
2023/02/17 21:44:27 BGP: [KHG7H-RH4PN] Unable to convert EVPN prefix [3]:[0]:[32]:[2.2.2.2] into IPv4/IPv6 prefix. Falling back to non-optimized route-map lookup
2023/02/17 21:44:27 BGP: [MT1SJ-WEJQ1] Best match route-map: soo-foo, sequence: 10 for pfx: [3]:[0]:[32]:[2.2.2.2], result: match
2023/02/17 21:44:27 BGP: [H5AW4-JFYQC] Route-map: soo-foo, prefix: [3]:[0]:[32]:[2.2.2.2], result: permit
```
Signed-off-by: Trey Aspelund <taspelund@nvidia.com>
Commit d7c6467ba2 added the
ability to specify non pretty printing but unfortunately
forgot to use the option variable to make the whole
thing work.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Implement: https://datatracker.ietf.org/doc/html/draft-abraitis-bgp-version-capability
Tested with GoBGP:
```
% ./gobgp neighbor 192.168.10.124
BGP neighbor is 192.168.10.124, remote AS 65001
BGP version 4, remote router ID 200.200.200.202
BGP state = ESTABLISHED, up for 00:01:49
BGP OutQ = 0, Flops = 0
Hold time is 3, keepalive interval is 1 seconds
Configured hold time is 90, keepalive interval is 30 seconds
Neighbor capabilities:
multiprotocol:
ipv4-unicast: advertised and received
ipv6-unicast: advertised
route-refresh: advertised and received
extended-nexthop: advertised
Local: nlri: ipv4-unicast, nexthop: ipv6
UnknownCapability(6): received
UnknownCapability(9): received
graceful-restart: advertised and received
Local: restart time 10 sec
ipv6-unicast
ipv4-unicast
Remote: restart time 120 sec, notification flag set
ipv4-unicast, forward flag set
4-octet-as: advertised and received
add-path: received
Remote:
ipv4-unicast: receive
enhanced-route-refresh: received
long-lived-graceful-restart: advertised and received
Local:
ipv6-unicast, restart time 10 sec
ipv4-unicast, restart time 20 sec
Remote:
ipv4-unicast, restart time 0 sec, forward flag set
fqdn: advertised and received
Local:
name: donatas-pc, domain:
Remote:
name: spine1-debian-11, domain:
software-version: advertised and received
Local:
GoBGP/3.10.0
Remote:
FRRouting/8.5-dev-MyOwnFRRVersion-gdc92f44a45-dirt
cisco-route-refresh: received
Message statistics:
```
FRR side:
```
root@spine1-debian-11:~# vtysh -c 'show bgp neighbor 192.168.10.17 json' | \
> jq '."192.168.10.17".neighborCapabilities.softwareVersion.receivedSoftwareVersion'
"GoBGP/3.10.0"
root@spine1-debian-11:~#
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Make the htonll/ntohll functions compile time determined
since we have MACROS to determine endianess and bonus
points it makes it more readable.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
I don't believe label can be NULL in any calling path
but SA thinks so so let's just assert here to be safe
anyway and make it happy.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add the ability for sharpd to install vni labels for testing.
This patch is just for testing/dev work purposes with evpn.
It adds some code to vty for nexthop-groups so we can explicitly
add a label to nexthops and then let sharpd encode them to zebra.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add the ability to specify the label type along with the labels
you are passing to zebra in zapi_nexthop. This is needed as we
abstract the label code to be re-used by evpn as well as mpls.
Protocols need to be able to set the type of label they have attached.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Use the already existing mpls label code to store VNI
info for vxlan. VNI's are defined as labels just like mpls,
we should be using the same code for both.
This patch is the first part of that. Next we will need to
abstract the label code to not be so mpls specific. Currently
in this, we are just treating VXLAN as a label type and storing
it that way.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Add a function nexthop_group_has_label() for determining
if even a single nexthop in the group has a label on it.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Change the bool to a uint32_t and setup a flag to test
for and set against. Future commits will allow
a debug detail which should be used by match/set statements
to give further context of what is going on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Use the defines for distance that are in zebra.h. We could
easily have a cluster where we don't agree with ourselves. So
let's convert zebra to use the defines in zebra.h
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The define of ZEBRA_ON_RIB_PROCESS_HOOK_CALL was in zebra.h
which exposes it to everyone, except zebra is the only daemon
to use this define. This does not beling in zebra.h
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
We apparently do not use it and looking at what this
file actually includes, we should not be including this
at all.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add affinity-map hooks to check the utilization of affinity-map in
link-params before its deletion and to update link-params when the
affinity-map bit-position is updated.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
sbuf variable is used among other things to store IS-IS database output.
Future commits will introduce the output of extended access groups in
the "show isis database detail" output.
Extend the sbuf size to have chance to store all information.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the support of Extended Admin-Group (RFC7308) to the zebra interface
link-params Traffic-Engineering context.
Extended admin-groups can be configured with the affinity-map:
> affinity-map blue bit-position 221
> int eth-rt1
> link-params
> affinity blue
> exit-link-params
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
RD may be built based on an AS number. Like for the AS, the RD
may use the AS notation. The two below examples can illustrate:
RD 1.1:20 stands for an AS4B:NN RD with AS4B=65536 in dot format.
RD 0.1:20 stands for an AS2B:NNNN RD with AS2B=0.1 in dot+ format.
This commit adds the asnotation mode to prefix_rd2str() API so as
to pick up the relevant display.
Two new printfrr extensions are available to display the RD with
the two above display methods.
- The pRDD extension stands for dot asnotation format
- The pRDE extension stands for dot+ asnotation format.
- The pRD extension has been renamed to pRDP extension
The code is changed each time '%pRD' printf extension is called.
Possibly, the asnotation may change the output, then a macro defines
the asnotation mode to use. A side effect of forging the mode to
use is that the string could not be concatenated with other strings
in vty_out and snprintfrr. Those functions have been called multiple
times. When zlog_debug needs to display the RD with some other string,
the prefix_rd2str() old API is used instead of the printf extension.
Some code has been kept untouched:
- code related to running-config. Actually, wherever an RD is displayed,
its configured name should be dumped.
- bgp rfapi code
- bgp evpn multihoming code (partially done), since the logic is
missing to get the asnotation of 'struct bgp_evpn_es'.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
The as-notation mode of the BGP instance will impact the way
the neighbor AS information is dumped in the show commands.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A json AS number API is created in order to output a
given AS number. In order to keep backward compatibility,
if the as-notation uses a number, then the json is encoded
as an integer, otherwise the encoding will be a string.
For what is not relevant to running-configuration, the
as-notation mode is the one used for the BGP instance.
Also, the vty completion gets the configured 'as_pretty'
string value, when an user wants to get the available
BGP instances.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Each BGP prefix may have an as-path list attached. A forged
string is stored in the BGP attribute and shows the as-path
list output.
Before this commit, the as-path list output was expressed as
a list of AS values in plain format. Now, if a given BGP instance
uses a specific asnotation, then the output is changed:
new output:
router bgp 1.1 asnotation dot
!
address-family ipv4 unicast
network 10.200.0.0/24 route-map rmap
network 10.201.0.0/24 route-map rmap
redistribute connected route-map rmap
exit-address-family
exit
!
route-map rmap permit 1
set as-path prepend 1.1 5433.55 264564564
exit
ubuntu2004# do show bgp ipv4
BGP table version is 2, local router ID is 10.0.2.15, vrf id 0
Default local pref 100, local AS 1.1
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 4.4.4.4/32 0.0.0.0 0 32768 1.1 5433.55 4036.61268 ?
*> 10.0.2.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 ?
10.200.0.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 i
10.201.0.0/24 0.0.0.0 0 32768 1.1 5433.55 4036.61268 i
The changes include:
- the aspath structure has a new field: asnotation type
The ashash list will differentiate 2 aspaths using a different
asnotation.
- 3 new printf extensions display the as number in the wished
format: pASP, pASD, pASE for plain, dot, or dot+ format (extended).
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
A new keyword permits changing the BGP as-notation output:
- [no] router bgp <> [vrf BLABLA] [as-notation [<dot|plain|dot+>]]
At the BGP instance creation, the output will inherit the way the
BGP instance is declared. For instance, the 'router bgp 1.1'
command will configure the output in the dot format. However, if
the client wants to choose an alternate output, he will have to
add the extra command: 'router bgp 1.1 as-notation dot+'.
Also, if the user wants to have plain format, even if the BGP
instance is declared in dot format, the keyword can also be used
for that.
The as-notation output is only taken into account at the BGP
instance creation. In the case where VPN instances are used,
a separate instance may be dynamically created. In that case,
the real as-notation format will be taken into acccount at the
first configuration.
Linking the as-notation format with the BGP instance makes sense,
as the operators want to keep consistency of what they configure.
One technical reason why to link the as-notation output with the
BGP instance creation is that the as-path segment lists stored
in the BGP updates use a string representation to handle aspath
operations (by using regexp for instance). Changing on the fly
the output needs to regenerate this string representation to the
correct format. Linking the configuration to the BGP instance
creation avoids refreshing the BGP updates. A similar mechanism
is put in place in junos too.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
AS number can be defined as an unsigned long number, or
two uint16 values separated by a period (.). The possible
valus are:
- usual 32 bit values : [1;2^32 -1]
- <1.65535>.<0.65535> for dot notation
- <0.65535>.<0.65535> for dot+ notation.
The 0.0 value is forbidden when configuring BGP instances
or peer configurations.
A new ASN type is added for parsing in the vty.
The following commands use that new identifier:
- router bgp ..
- bgp confederation ..
- neighbor <> remote-as <>
- neighbor <> local-as <>
- clear ip bgp <>
- route-map / set as-path <>
An asn library is available in lib/ and provides some
services:
- convert an as string into an as number.
- parse an as path list string and extract a number.
- convert an as number into a string.
Also, the bgp tests forge an as_zero_path, and to do that,
an API to relax the possibility to have a 0 as value is
specifically called from the tests.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a function to copy a bitfield_t structure.
Add a ‘void *’ to ‘word_t *’ converstion in bf_init() to avoid the
following error:
> ./lib/bitfield.h: In function ‘bf_copy’:
> ./lib/bitfield.h:75:12: error: request for implicit conversion from ‘void *’ to ‘word_t *’ {aka ‘unsigned int *’} not permitted in C++ [-Werror=c++-compat]
> (v).data = XCALLOC(MTYPE_BITFIELD, ((v).m * sizeof(word_t))); \
> ^
> ./lib/bitfield.h:278:2: note: in expansion of macro ‘bf_init’
> bf_init(dst, WORD_SIZE * (src.m - 1));
> ^~~~~~~
Signed-off-by: Hiroki Shirokura <hiroki.shirokura@linecorp.com>
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Add the affinity-map global command to zebra. The syntax is:
> affinity-map NAME bit-position (0-1023)
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
The skiplist code has a very "colorful" history. Use the SPDX
"LicenseRef" syntax/notation to track it.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The files converted in this commit either had some random misspelling or
formatting weirdness that made them escape automated replacement, or
have a particularly "weird" licensing setup (e.g. dual-licensed.)
This also marks a bunch of "public domain" files as SPDX License "NONE".
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Initial commit: 23b2a7ef52
changed the json output of `show bgp <afi> <safi> json` to
not have pretty print because when under a situation where
there are a bunch of routes with a large scale ecmp show
output was taking forever and this commit cut 2 minutes out
of vtysh run time.
Subusequent commit: f4ec52f7cc
changed this back.
When upgrading to latest version the long run time was noticed
due to testing. Let's add back this functionality such that
FRR can have reduced run times with vtysh when it's really
needed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
RFC7471 and RFC8570 have defined the Extended Traffic Engineering
metrics that are carried within TLV of 32 bits data length. Extended
metrics, excepting bandwidth ones, use the following format:
> 0 1 2 3
> 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> | Type | Length |
> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
> |A| RESERVED | Value |
> +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Data contains a flag/reserved of 8 bits and a 24 bits value.
The TE_EXT_MASK mask macro extracts a 28 bits value from a 32 bits
variable instead of 24 bits. It works in most of the case because
RESERVED bits are generally set to 0.
Fix the TE_EXT_MASK mask.
Fixes: 16f1b9ee29 ("Update Traffic Engineering Support for OSPFD")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
While this wasn't a problematic use of a format string, make it a
literal constant so the compiler is happy.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Passing a pre-formatted buffer in these places needs a `"%s"` in front
so it doesn't get formatted twice.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
We do use non-constant/literal format strings in a few places for more
or less valid reasons; put `ignored "-Wformat-nonliteral"` around those
so we can have the warning enabled for everywhere else.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
wheel_stop and wheel_start have never been used. Let's just remove
them. After close to 7 years, if needed someone else can add back in.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When running the build in a separate build directory, redirecting output
into a file can error out if the directory does not exist yet. Some
places already had `mkdir -p` calls, but not all.
Make all occurences of this consistently use `@$(MKDIR_P)`.
(Extension of PR #12575 to catch more places.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Daemons like staticd already implement nexthop zapi (un)registration.
b7ca809d1c ("lib: BFD automatic source selection") has implemented a
concurrent nexthop (un)registration. Some nexthop could be unregistred
by the bfd whereas they were still needed by the daemon.
Let the deamons deal with nexthop zapi (un)registration.
Fixes: b7ca809d1c ("lib: BFD automatic source selection")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
b7ca809d1c ("lib: BFD automatic source selection") has added a dedicated
zclient socket for nht tracking. Since the bfd lib is used by daemons
that already has a zclient socket, those daemons has now a second
zclient socket. However, zebra does not distinguish the two zclient
sessions. For example, the interfaces are asked a second via
zebra_message_send(zclient, ZEBRA_INTERFACE_ADD, VRF_DEFAULT) in
zclient_start(). As a result, callbacks functions like bgp_ifp_create()
are called a second time, which causes some processing overhead and
might cause bugs.
Re-use the existing zclient socket for nht tracking.
Note that BFD automatic source selection is only currently implemented
in staticd. Other daemons will require to add the following in their
ZEBRA_NEXTHOP_UPDATE callback function:
> if (zclient->bfd_integration)
> bfd_nht_update(&matched, &nhr);
Fixes: b7ca809d1c ("lib: BFD automatic source selection")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Don't directly use `time()` for generating sequence numbers for two
reasons:
1. `time()` can go backwards (due to NTP or time adjustments)
2. Coverity Scan warns every time we truncate a `time_t` variable for
good reason (verify that we are Y2K38 ready).
Found by Coverity Scan (CID 1519812, 1519786, 1519783 and 1519772)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Description:
Addition of OSPF_LOG for conditionally logging ospf messages,
at different log levels.
Signed-off-by: Manoj Naragund <mnaragund@vmware.com>
If we got inside the condition of `vrfp->status == VRF_ACTIVE` then
don't make the same check again.
Found by Coverity Scan (CID 1519760)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Use "(null)" for empty IP address.
One example in `bgp_zebra_send_remote_macip()` to install mac:
Before:
```
2023/01/18 02:09:09 BGP: [SCHS5-AK960] Tx ADD MACIP, VNI 200 MAC 06:6b:7c:db:83:72 IP flags 0x0 seq 0 remote VTEP 88.88.88.88 esi -
```
After:
```
2023/01/18 20:19:57 BGP: [SCHS5-AK960] Tx ADD MACIP, VNI 200 MAC 06:6b:7c:db:83:72 IP (null) flags 0x0 seq 0 remote VTEP 88.88.88.88 esi -
```
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Changes:
- Convert `unsigned int` to `time_t` to satisfy time truncation warnings
even though at this point we had already used the modulus operator.
- Avoid trying to access outside the bounds of the array
`months` array has a size of 13 elements, but the code inside the loop
uses `i + 1` to peek on the next month.
Found by Coverity Scan (CID 1519752 and 1519769)
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
When setting rule for access-list ( and prefix-list ) without sequence, it
will automatically get a sequence by `acl_get_seq()`, and return
`CMD_SUCCESS` for command even this sequence value is wrong.
In this scene, `CMD_WARNING_CONFIG_FAILED` should be returned with a
warning.
So, add the check in `acl_get_seq()` and move `nb_cli_enqueue_change()`
after the check of wrong sequence.
Both `plist_remove_if_empty()` and `acl_remove_if_empty()` should ignore
this check, there is no change on them.
Before:
```
anlan(config)# access-list aa seq 4294967295 deny 6.6.6.6/32
anlan(config)# access-list aa deny 6.6.6.7/32 <- Return CMD_SUCCESS
YANG error(s):
Value "4294967300" is out of uint32's min/max bounds.
Value "4294967300" is out of uint32's min/max bounds.
Value "4294967300" is out of uint32's min/max bounds.
Value "4294967300" is out of uint32's min/max bounds.
Value "4294967300" is out of uint32's min/max bounds.
YANG path: Schema location /frr-filter:lib/prefix-list/entry/sequence.
% Failed to edit configuration.
```
After:
```
anlan(config)# access-list aa seq 4294967295 deny 6.6.6.6/32
anlan(config)# access-list aa deny 6.6.6.7/32 <- Return CMD_WARNING_CONFIG_FAILED
% Malformed sequence value
```
Additionally, fixed the overflow issue on `acl_get_seq()` on **32bit** platforms.
Just change the returned type of `acl_get_seq()` from `long` to `int64_t`.
Before:
```
anlan(config)# access-list bb seq 4294967295 deny 6.6.6.6/32
anlan(config)# access-list bb deny 6.6.6.7/32
anlan(config)# do show run
...
access-list bb seq 4294967295 deny 6.6.6.6/32
access-list bb seq 4 deny 6.6.6.7/32 <- Overflow
```
After:
```
anlan(config)# access-list bb seq 4294967295 deny 6.6.6.6/32
anlan(config)# access-list bb deny 6.6.6.7/32
% Malformed sequence value
```
Signed-off-by: anlan_cs <vic.lan@pica8.com>
Add a function to find the VRF or the loopback interface: the loopback
interface for the default VRF and the VRF master interface otherwise.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Implement clean up function to be called on shutdown to make daemon exit
clean for valgrind and other memory sanitizers.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Implement new BFD library issue to allow protocols to configure BFD
sessions with automatic source selection.
The source selection will be based on the Next Hop Tracking feature:
`zebra` will do RIB lookups to determine the output interface and the
primary source address of that interface will be used as source.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If symvalid is false, looking at symidx is bogus.
This fixes a build-time SEGV on mips64el.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
mips64el does not have a 64-bit PC-relative relocation, which is needed
to emit the ELF note for xrefs. Disabling the ELF note means clippy
takes the fallback path using section headers, so everything does still
work (... unless you strip the section headers.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Add a function to find the VRF or the loopback interface: the loopback
interface for the default VRF and the VRF master interface otherwise.
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
When compiling with -fsanitize=thread. I started getting this error:
staticd/static_zebra.c: In function ‘static_zebra_nht_get_prefix’:
staticd/static_zebra.c:316:1: error: control reaches end of non-void function [-Werror=return-type]
316 | }
| ^
Just to make future efforts still work, let's just make the compiler happy.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The list delete function on creation was set to srv6_locator_chunk_free
Which takes a double pointer and dereferences it to free the data.
When list_delete is called it calls the delete function like this:
if (*list->del)
(*list->del)(node->data);
The data is not passed in by reference and as such we do not have
a double pointer. Fortunately this list_delete is only really
called on shutdown when the locator was deleted and we do not
have a fun situation where we were suddenly freeing 'something'.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The wq->spec.errorfunc is never used in the code.
It's been in the code base since 2005 and I also
do not remember ever seeing it being called. No
workqueue process function ever returns error.
Since it's not used let's just remove it from the
code base.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When shutting down ensure that any daemon operating with
snmp tells it to stop operating so no more data is sent.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The wrong size is allocated for struct ls_prefix memory.
Fix ls_prefix memory allocation.
Fixes: b0c0b43348 ("lib: Update Link State Database")
Signed-off-by: Louis Scalbert <louis.scalbert@6wind.com>
Don't let `zprivs_caps_init` allocate resources without checking if
there were other caps previously allocated.
This fixes a memory leak that happens on daemons that `fork()` and reuse
the `<daemon>_di` (see `ldpd`/`lde`/`ldpe` code).
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
