For the sake of Segment Routing (SR) and Traffic Engineering (TE)
Policies there's a need for additional infrastructure within zebra.
The infrastructure in this PR is supposed to manage such policies
in terms of installing binding SIDs and LSPs. Also it is capable of
managing MPLS labels using the label manager, keeping track of
nexthops (for resolving labels) and notifying interested parties about
changes of a policy/LSP state. Further it enables a route map mechanism
for BGP and SR-TE colors such that learned BGP routes can be mapped
onto SR-TE Policies.
This PR does not introduce any usable features by now, it is just
infrastructure for other upcoming PRs which will introduce 'pathd',
a new SR-TE daemon.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
1. BGP informs zebra if a MAC-IP is a SYNC path and if it active on the
ES peer.
2. Zebra sends paths that are "local-inactive" with the proxy flag to
BGP.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
1. Local ethernet segments are configured in zebra by attaching a
local-es-id and sys-mac to a access interface -
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
!
interface hostbond1
evpn mh es-id 1
evpn mh es-sys-mac 00:00:00:00:01:11
!
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
This info is then sent to BGP and used for the generation of EAD-per-ES
routes.
2. Access VLANs associated with an (ES) access port are translated into
ES-EVI objects and sent to BGP. This is used by BGP for the
generation of EAD-EVI routes.
3. Remote ESs are imported by BGP and sent to zebra. A list of VTEPs
is maintained per-remote ES in zebra. This list is used for the creation
of the L2-NHG that is used for forwarding traffic.
4. MAC entries with a non-zero ESI destination use the L2-NHG associated
with the ESI for forwarding traffic over the VxLAN overlay.
Please see zebra_evpn_mh.h for the datastruct organization details.
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Initial changes to support a nexthop with multiple backups. Lib
changes to hold a small array in each primary, zapi message
changes to support sending multiple backups, and daemon
changes to show commands to support multiple backups. The config
input for multiple backup indices is not present here.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Start modifying the OPAQUE zapi message to include optional
unicast destination zapi client info. Add a 'decode' api and
opaque msg struct to encapsulate that optional info.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Change name of an opaque zapi api to 'decode' to align with the
other zapi message parsing apis. Missed that in the original
opaque commits.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a zapi message type designed to carry opaque data. Add
'send' api, and prototype for client handler function. Also
add registration/unreg messages, so that clients can 'subscribe'
to receive these messages as they're passing through zebra.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Provide a way for the data plane to indicate pseudowire
status (such as: not forwarding, AC failure).
On a data plane pseudowire install failure, data plane
sets the pseudowire status.
Zebra relays the pseudowire status to LDP.
LDP includes the pseudowire status in the LDP notification
to the LDP peer.
Signed-off-by: Karen Schoener <karen@voltanet.io>
Distinguish zapi sessions, for daemons who use more than one,
by adding a session id. The tuple of proto + instance is not
adequate to support clients who use multiple zapi sessions.
Include the id in the client show output if it's present. Add
a bit of info about this to the developer doc.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use const with some args to ipaddr, zebra vxlan, mpls
lsp, and nexthop apis; add some extra checks to some
nexthop-related apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Zebra is currently sending messages on interface add/delete/update,
VRF add/delete, and interface address change - regardless of whether
its clients had requested them. This is problematic for lde and isis,
which only listens to label chunk messages, and only when it is
waiting for one (synchronous client). The effect is the that messages
accumulate on the lde synchronous message queue.
With this change:
- Zebra does not send unsolicited messages to synchronous clients.
- Synchronous clients send a ZEBRA_HELLO to zebra.
The ZEBRA_HELLO contains a new boolean field: sychronous.
- LDP and PIM have been updated to send a ZEBRA_HELLO for their
synchronous clients.
Signed-off-by: Karen Schoener <karen@voltanet.io>
Use the zapi_nexthop struct with the mpls_labels
zapi messages instead of the special-purpose (and
more limited) nexthop struct that was being used.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
For Graceful restart clients have to send GR capabilities
library functions are added to encode capabilities and
also for zebra to decode client capabilities.
Co-authored-by: Santosh P K <sapk@vmware.com>
Co-authored-by: Soman K S <somanks@vmware.com>
Signed-off-by: Santosh P K <sapk@vmware.com>
These changes are for Zebra lib in order to supportGraceful Restart
feature. These changes are addedtemporarily, until Zebra Graceful
Restart lib Pr is merged.
Signed-off-by: Biswajit Sadhu <sadhub@vmware.com>
Signed-off-by: Soman K S <somanks@vmware.com>
Add error handling for top level failures (not able to
execute command, unable to find vrf for command, etc.)
With this error handling we add a new zapi message type
of ZEBRA_ERROR used when we are unable to properly handle
a zapi command and pass it down into the lower level code.
In the event of this, we reply with a message of type
enum zebra_error_types containing the error type.
The sent packet will look like so:
0 1 2 3
0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Length | Marker | Version |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| VRF ID |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Command |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| ERROR TYPE |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
Also add appropriate hooks for clients to subscribe to for
handling these types of errors.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Use a per-nexthop flag to indicate the presence of labels; add
some utility zapi encode/decode apis for nexthops; use the zapi
apis more consistently.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add a function for converting the zapi_rule_notify_owner enum
type to a string for ease of use.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
By default announct Self Type-2 routes with
system IP as nexthop and system MAC as
nexthop.
An API to check type-2 is self route via
checking ipv4/ipv6 address from connected interfaces list.
An API to extract RMAC and nexthop for type-2
routes based on advertise-svi-ip knob is enabled.
When advertise-pip is enabled/disabled, trigger type-2
route update. For self type-2 routes to use
anycast or individual (rmac, nexthop) addresses.
Ticket:CM-26190
Reviewed By:
Testing Done:
Enable 'advertise-svi-ip' knob in bgp default instance.
the vrf instance svi ip is advertised with nexthop
as default instance router-id and RMAC as system MAC.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
This includes:
1. Defining message formats
2. Stream Decoding after receiving the message at PIM
3. Handling MLAG UP & Down Notifications
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
when ever a FRR Client wants to send any data to another node
using MLAG Channel, uses below mechanisam.
1. sends a MLAG Registration to zebra with interested messages that
it is intended to receive from peer.
2. In response to this request, Zebra opens communication channel with
MLAG. and also in Rx. diretion zebra forwards only those messages which
client shown interest during registration
3. when client is no-longer interested in communicating with MLAG, client
posts De-register to Zebra
4. if this is the last client which is interested for MLAG Communication,
zebra closes the channel.
why PIM Needs MLAG Communication
================================
1. In general on LAN Networks elecetd DR will send the Join towards
Multicast RP in case of a LHR and Register in case of FHR.
2. But in case DR Goes down, traffic will be re-converged only after
the New DR is elected, but this can take time based on Hold Timer to
detect the DR down.
3. this can be optimised by using MLAG Mecganisam.
4. and also Traffic can be forwarded more efficiently by knowing the cost
towards RP using MLAG
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
With commit: a9ff90c41b
the vrf_id_t was changed from a uint16_t to a uint32_t
Zebra tracked the last command sent to it's peer via peeking
into the data it was sending to each client ( since we had
lost the idea of what the command was when it was time to track
the data ).
Add a define to track this and add a bit of verbiage
to the code to allow us to notice when we screw with
the header again so that this is just fixed correctly
when it happens again.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This includes:
1. Defining message formats
2. Stream Decoding after receiving the message at PIM
3. Handling MLAG UP & Down Notifications
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
For all the places we have a zclient->interface_up convert
them to use the interface ifp_up callback instead.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Switch the zclient->interface_add functionality to have everyone
use the interface create callback in lib/if.c
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
when ever a FRR Client wants to send any data to another node
using MLAG Channel, uses below mechanisam.
1. sends a MLAG Registration to zebra with interested messages that
it is intended to receive from peer.
2. In response to this request, Zebra opens communication channel with
MLAG. and also in Rx. diretion zebra forwards only those messages which
client shown interest during registration
3. when client is no-longer interested in communicating with MLAG, client
posts De-register to Zebra
4. if this is the last client which is interested for MLAG Communication,
zebra closes the channel.
why PIM Needs MLAG Communication
================================
1. In general on LAN Networks elecetd DR will send the Join towards
Multicast RP in case of a LHR and Register in case of FHR.
2. But in case DR Goes down, traffic will be re-converged only after
the New DR is elected, but this can take time based on Hold Timer to
detect the DR down.
3. this can be optimised by using MLAG Mecganisam.
4. and also Traffic can be forwarded more efficiently by knowing the cost
towards RP using MLAG
Signed-off-by: Satheesh Kumar K <sathk@cumulusnetworks.com>
This new message makes it possible to install/reinstall LSPs with
multiple nexthops using a single ZAPI message.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
* Add ability to specify the nexthop type;
* Add ability to install or not a FTN (in addition to an LSP).
These two additions will be useful to install local SR Prefix-SIDs
configured with the no-PHP option.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Use the route type and instance instead of the route distance
to identify MPLS FTNs. This is a more robust approach since the
routing daemons can modify the distance of their announced routes
via configuration, which can cause inconsistencies.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Do this for the following reasons:
* Improve modularity of the code by separating the decoding of the
ZAPI messages from their processing;
* Create an API that is easier to use by the client daemons.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
For SRGB, we need to support chunk requests starting at a
specific point in the label space, rather than just asking
for any sufficiently large chunk. To this purpose, we extend
the label manager api to request a chunk with a base value;
if the base is set to 0, the label manager will behave as it
currently does, i.e. fetching the first free chunk big enough
to satisfy the request.
update all the existing calls to get chunks from the label
manager so that they use MPLS_LABEL_BASE_ANY as the base
for the requested chunk
Signed-off-by: Emanuele Di Pascale <emanuele@voltanet.io>
