Conver these functions:
route_map_add_match
route_map_delete_match
route_map_add_set
route_map_delete_set
To return the `enum rmap_compile_rets` and ensure all functions
that use this code handle all the enumerated possible returns.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
State1:
If match cmd returns RMAP_MATCH then, keep existing behaviour.
If routemap type is PERMIT, execute set cmds or call cmds if applicable,
otherwise PERMIT!
Else If routemap type is DENY, we DENYMATCH right away
State2:
If match cmd returns RMAP_NOMATCH, continue on to next route-map. If there
are no other rules or if all the rules return RMAP_NOMATCH, return DENYMATCH
We require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Also, this rule should be applicable for routes with VNI label only, and
not for routes without labels. For example, type 3 and type 4 EVPN routes
do not have labels, so, this match cmd should let them through.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
As a result we have a 3rd state:
State3:
If match cmd returned RMAP_NOOP
Then, proceed to other route-map, otherwise if there are no more
rules or if all the rules return RMAP_NOOP, then, return RMAP_PERMITMATCH.
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Say, more than one sequence of a route-map uses the same named entity
in its match clause. After that entity is removed from any one of the
route-map sequences, any further changes made to that entity doesn't
dynamically take effect.
A reference counter, that allows the named entity to keep a count of
the route-maps dependent on it, has been introduced to address this issue.
Signed-off-by: NaveenThanikachalam <nthanikachal@vmware.com>
Introducing a 3rd state for route_map_apply library function: RMAP_NOOP
Traditionally route map MATCH rule apis were designed to return
a binary response, consisting of either RMAP_MATCH or RMAP_NOMATCH.
(Route-map SET rule apis return RMAP_OKAY or RMAP_ERROR).
Depending on this response, the following statemachine decided the
course of action:
Action: Apply route-map match and return the result (RMAP_MATCH/RMAP_NOMATCH)
State1: Receveived RMAP_MATCH
THEN: If Routemap type is PERMIT, execute other rules if applicable,
otherwise we PERMIT!
Else: If Routemap type is DENY, we DENYMATCH right away
State2: Received RMAP_NOMATCH, continue on to next route-map, otherwise,
return DENYMATCH by default if nothing matched.
With reference to PR 4078 (https://github.com/FRRouting/frr/pull/4078),
we require a 3rd state because of the following situation:
The issue - what if, the rule api needs to abort or ignore a rule?:
"match evpn vni xx" route-map filter can be applied to incoming routes
regardless of whether the tunnel type is vxlan or mpls.
This rule should be N/A for mpls based evpn route, but applicable to only
vxlan based evpn route.
Today, the filter produces either a match or nomatch response regardless of
whether it is mpls/vxlan, resulting in either permitting or denying the
route.. So an mpls evpn route may get filtered out incorrectly.
Eg: "route-map RM1 permit 10 ; match evpn vni 20" or
"route-map RM2 deny 20 ; match vni 20"
With the introduction of the 3rd state, we can abort this rule check safely.
How? The rules api can now return RMAP_NOOP (or another enum) to indicate
that it encountered an invalid check, and needs to abort just that rule,
but continue with other rules.
Question: Do we repurpose an existing enum RMAP_OKAY or RMAP_ERROR
as the 3rd state (or create a new enum like RMAP_NOOP)?
RMAP_OKAY and RMAP_ERROR are used to return the result of set cmd.
We chose to go with RMAP_NOOP (but open to ideas),
as a way to bypass the rmap filter
As a result we have a 3rd state:
State3: Received RMAP_NOOP
Then, proceed to other route-map, otherwise return RMAP_PERMITMATCH by default.
Signed-off-by:Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
The CLI code ensures that the clippy code produces
valid input for the zebra_routemap.c functions, but
coverity SA does not understand this fact. So add
some asserts to make the coverity SA happy.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The route_map_event_hook callback was passing the `route_map_event_t`
to each individual interested party. No-one is ever using this data
so let's cut to the chase a bit and remove the pass through of data.
This is considered ok in that the routemap.c code came this way
originally and after 15+ years no-one is using this functionality.
Nor do I see any `easy` way to do anything useful with this data.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Made changes and updated the routemap applied counter in the following flows.
1.Increment when route map attached to a list.
2.Decrement when route map removed / modified from a list.
3.Increment/decrement when route map create/delete callback triggered.
4.Besides ,This counter need not be updated when a route map is got updated.
i.e changing/adding a match value to the existing routemap.
In Zebra , same update api called for all three add/delete/update operation.
But this counter have to be updated only for routemap addition.
Addressed this specific change by identifying the routemap operation based
on routemap pointer.
Signed-off-by: RajeshGirada <rgirada@vmware.com>
The master thread handler is really part of the zrouter structure.
So let's move it over to that. Eventually zserv.h will only be
used for zapi messages.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Favor usage of the afi_t enumeration to identify address-families
over using the classic AF_INET[6] constants for that. The choice to
use either of the two seems to be mostly arbitrary throughout our
code base, which leads to confusion and bugs like the one fixed by
commit 6f95d11a1. To address this problem, favor usage of the afi_t
enumeration whenever possible, since 1) it's an enumeration (helps
the compilers to catch some bugs), 2) has a safi_t sibling and 3)
can be used to index static arrays. AF_INET[6] should then be used
only when interfacing with the kernel or external libraries like
libc. The family2afi() and afi2family() functions can be used to
convert between the two different representations back and forth.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Work to handle the route-maps, namely the header changes in zebra_vrf.h
and the mapping of using that everywhere
Signed-off-by: vishaldhingra vdhingra@vmware.com
* Added code for "match ipv6 address prefix list" command
* Added common function route_match_address_prefix_list() to process
routemap for AFI_IP and AFI_IP6 address family
Signed-off-by: kssoman <somanks@vmware.com>
* Check for the modified routemap in zebra_route_map_process_update_cb()
* Added zebra_rib_table_rm_update() for RIB routemap processing
* Added zebra_nht_rm_update() for NHT routemap processing
Signed-off-by: kssoman <somanks@vmware.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add 'const' to prefix args to several zebra route update,
redistribution, and route owner notification apis.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The route_map_walk_update_list callback function
never uses the return code, so just remove it.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add some basic code for zebra to start to keep track
of route-maps that have changed. At this point we
are not doing anything. As we fix code to handle
route-maps better, code will be shifted around.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add to zebra route-maps the ability to match on a source-instance
route-map FOO deny 55
match source-instance 5
route-map FOO permit 60
ip protocol any route-map FOO
This will match any protocol route installation with a source-instance of 5.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If src happens to point at all 0's due to not initializing
it and if the address passed in is not a v6 address then
we would not set src in the AF_INET6 call and would
fail the (src.ipv4.s_addr && inet_pton(AF_INET...)
call. Thus causing us to return a NULL and make
the routemap code think there was an issue.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow this to work:
vrf DONNA
ip route 4.3.2.1/32 192.168.1.5 nexthop-vrf EVA
The static route code was not properly telling the
nexthop resolution code what vrf to use.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add the ability to match a specific prefix-length in zebra.
This command behaves in the same manner that the v4 version
of the command behaves.
Fixes: #1398
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Add the RMAP_COMPILE_SUCCESS and switch over to using it.
Refactoring allows a removal of a if statement to just
use the switch statement already in place. Additionally
the reworking cleans up memory freeing in a couple of spots.
In one spot we no longer will leak memory too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This reverts commit c14777c6bf.
clang 5 is not widely available enough for people to indent with. This
is particularly problematic when rebasing/adjusting branches.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Daniel Walton <dwalton@cumulusnetworks.com>
This allows frr-reload.py (or anything else that scripts via vtysh)
to know if the vtysh command worked or hit an error.
The 'struct rib' data structure is missnamed. It really
is a 'struct route_entry' as part of the 'struct route_node'.
We have 1 'struct route_entry' per route src. As such
1 route node can have multiple route entries if multiple
protocols attempt to install the same route.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Pass pointer to pointer instead of assigning by return value. See
previous commit message.
To ensure that the behavior stays functionally correct, any assignments
with the result of a thread_add* function have been transformed to set
the pointer to null before passing it. These can be removed wherever the
pointer is known to already be null.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Somewhere in the past we switched from
using the auto-generated redistribute statements
to a non-generated version. This caused us to
loose new protocols to redistribute as they are
added. Put it back.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
All of the autogenerated macros in lib/route_types.pl are now called
FRR_* instead of QUAGGA_*.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Additionally:
* Add [ip] to a couple bgp show commands
* Quick refactor of a couple ISIS commands
* Quick refactor of a couple OSPF6 commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Consolidate the routemap initialization into one
function.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Daniel Walton <dwalton@cumulusnetworks.com>
This patch improves zebra,ripd,ripngd,ospfd and bgpd so that they can
make use of 32-bit route tags in the case of zebra,ospf,bgp or 16-bit
route-tags in the case of ripd,ripngd.
It is based on the following patch:
commit d25764028829a3a30cdbabe85f32408a63cccadf
Author: Paul Jakma <paul.jakma@hpe.com>
Date: Fri Jul 1 14:23:45 2016 +0100
*: Widen width of Zserv routing tag field.
But also contains the changes which make this actually useful for all
the daemons.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
This puts all the proper VTY_DECLVAR_CONTEXT calls in place, removing
all vty->index uses in the process. With that, vty_config_lockless can
be enabled in zebra.
[v2: fix ordering screw-up in "interface XXX" command]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This is a rather large mechanical commit that splits up the memory types
defined in lib/memtypes.c and distributes them into *_memory.[ch] files
in the individual daemons.
The zebra change is slightly annoying because there is no nice place to
put the #include "zebra_memory.h" statement.
bgpd, ospf6d, isisd and some tests were reusing MTYPEs defined in the
library for its own use. This is bad practice and would break when the
memtype are made static.
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
[CF: rebased for cmaster-next]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Added the ability to supply a route-map to the ip import-table command,
which greatly improves filtering between the kernel prefixes in a
non-default table that are imported into the zebra rib.
Ticket:CM-8168
Signed-off-by: Donald Slice
Reviewed By: Donald Sharp
We were including 'extern struct zebra_t zebrad;' all
over the place. This made no sense. Refactor
into zserv.h where the definition was and remove resulting
unnecessary code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Don Slice <dslice@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Currently, when RIB processing is initiated (i.e., by calling rib_update()),
all routes are queued for processing. This is not desirable in all situations
because, sometimes the protocol may have an alternate path. In addition,
with NHT tracking nexthops, there are situations when NHT should be kicked
off first and that can trigger subsequent RIB processing.
This patch addresses this by introducing the notion of a trigger event. This
is only for the situation when the entire RIB is walked. The current triggers
- based on when rib_update() is invoked - are "interface change" and "route-
map change". In the former case, only the relevant routes are walked and
scheduled, in the latter case, currently all routes are scheduled for
processing.
Signed-off-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket: CM-7662
Reviewed By: CCR-3905
Note: The initial defect in this area was CM-7420. This was addressed in
2.5.4 with an interim change that only walked static routes upon interface
down. The change was considered a bit risky to do for interface up etc. Also,
this did not address scenarios like CM-7662. The current fix addresses CM-7662.
The NEXTHOP_TYPE_XXX_IFNAME types were never being used. Remove them
and the code associated with them.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some of the changes include:
- ensuring IPv6 addresses are printed correctly
- say 'updating' or 'deleting' etc. only when that is actually done
- say 'queuing' or 'dequeuing' only when that is actually done
- print useful info for 'detailed' debug - that now subsumes 'rib queue'
- delete various useless logs
- VRF-specific - print VRF id in RIB debugs prior to prefix
(e.g., 4:37.1.1.0/28)
Ticket: CM-8110
Reviewed By: CCR-3765
Testing Done: Manual testing (2.5-br)
When configuring the route-map rule "set src A.B.C.D", it checked
whether the source address exists on some interface.
Now it checks the source address throughout all VRFs.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/zebra_routemap.c
Conflicts:
zebra/zebra_routemap.c
Introduce a new "struct nexthop_vrfid" to specify a nexthop together
with the VRF ID it belongs to.
Thus in route_match_interface(), we can lookup the interface from
the correct VRF.
Signed-off-by: Feng Lu <lu.feng@6wind.com>
Reviewed-by: Alain Ritoux <alain.ritoux@6wind.com>
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Vincent JARDIN <vincent.jardin@6wind.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Conflicts:
zebra/zebra_rib.c
zebra/zebra_routemap.c
Ticket: CM-7420
Reviewed By: Vivek, Donald
Testing Done: UT, verification of the fix + ospf and bgp smoke
On a link delete/down event, schedule only the prefixes which have a
static RIB too.
Signed-off-by: Vipin Kumar <vipin@cumulusnetworks.com>
Reviewed-by: Vivek Venkatraman <vivek@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Ticket:
Reviewed By: CCR-3335
Testing Done: bgpsmoke, ENHE tests etc.
Add support for filtering routes from upper layer protocols to zebra
via route-maps for IPv6. The same functionality already existed for
IPv4.
In addition, add support for setting source of routes via IPv6 protocol
map.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
Reviewed-by: Donald Sharp <sharpd@cumulusnetworks.com>
Reviewed-by: Vivek Venkataraman <vivek@cumulusnetworks.com>
Reviewed-by: Vipin Kumar <vipin@cumulusnetworks.com>
BGP: Fix network import check use with NHT instead of scanner
When next hop tracking was implemented and the bgp scanner was eliminated,
the "network import-check" command got broken. This patch fixes that
issue. NHT is used to not just track nexthops, but also the static routes
that are announced as part of BGP's network command. The routes are
registered only when import-check is enabled. To optimize performance,
we register static routes only when import-check is enabled.
Signed-off-by: Dinesh G Dutt <ddutt@cumulusnetworks.com>
