The fpm code path in building a ecmp route for evpn has
a bug that caused it to not add the encap attribute to
the netlink message. See #f0f7b285b99dbd971400d33feea007232c0bd4a9
for the single path case being fixed.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Replace several switch blocks that contain every dplane opcode
with simpler sets of if()s. In these cases the code only
uses a couple of opcodes.
Signed-off-by: Mark Stapp <mjs@labn.net>
The nexthop group route replace operation was made consistent
across all versions of the kernel. A v6 route replacement
does not need to do a delete than add when using nexthop
groups
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Currently in the single nexthop case w/ evpn sending
down via the FPM the encap type is not being set
for the nexthop.
This looks like the result of some code reorg for the
nexthop happened but the fpm failed to be accounted for.
Let's just move the encap type encoding to where it
will happen.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Also:
- replace all /* fallthrough */ comments with portable fallthrough;
pseudo keyword to accomodate both gcc and clang
- add missing break; statements as required by older versions of gcc
- cleanup some code to remove unnecessary fallthrough
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Append zebra and lib to use muliple SRv6 segs SIDs, and keep one
seg SID for bgpd and sharpd.
Note: bgpd and sharpd compilation relies on the lib and zebra files,
i.e if we separate this: lib or zebra or bgpd or sharpd in different
commits - this will not compile.
Signed-off-by: Dmytro Shytyi <dmytro.shytyi@6wind.com>
When zebra receives a Netlink message containing a seg6local nexthop,
let's use the default values for optional attributes `lcblock_len` and
`lcnode_fn_len`, if they are not specified.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
When zebra receives a Netlink message containing a seg6local nexthop,
let's use the default values for optional attributes `lcblock_len` and
`lcnode_fn_len`, if they are not specified.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
Extend the `parse_encap_seg6local` function to parse SRv6 flavors
information contained in the Netlink message.
Signed-off-by: Carmine Scarpitta <carmine.scarpitta@uniroma2.it>
1) Add a bunch of get/set functions and associated data
structure in zebra_dplane to allow the setting and retrieval
of interface netlink data up into the master pthread.
2) Add a bit of code to breakup startup into stages. This is
because FRR currently has a mix of dplane and non dplane interactions
and the code needs to be paused before continuing on.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Rename the vrf_lookup_by_id function to zebra_vrf_lookup_by_id
and move to zebra_vrf.c where it nominally belongs, as that
we need zebra specific data to find this vrf_id and as such
it does not belong in vrf.c
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This is a first in a series of commits, whose goal is to rename
the thread system in FRR to an event system. There is a continual
problem where people are confusing `struct thread` with a true
pthread. In reality, our entire thread.c is an event system.
In this commit rename the thread.[ch] files to event.[ch].
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Ticket: 2698649
Testing Done: precommit and evpn-min
Problem:
When the mcast-group is updated, the changes were being read from the netlink
and populated by zebra, but when kernel sends the delete of fdb delete for the
group, we are deleting the mcast-group that we newly updated. This is because,
currently we blindly reset the mcast-group during fdb delete without checking
for mcast-group associated to the vni.
Fix is to separate add/update and delete mcast-group functions and to check
for mcast-group before resetting during delete.
Signed-off-by: sramamurthy <sramamurthy@nvidia.com>
Ignore zebra_mac updates if they do not contain a VNI for vxlan
interface. We don't have anything we can do with them.
'''
==443593== Process terminating with default action of signal 6 (SIGABRT): dumping core
==443593== at 0x4E1156C: __pthread_kill_implementation (in /usr/lib64/libc.so.6)
==443593== by 0x4DC4D15: raise (in /usr/lib64/libc.so.6)
==443593== by 0x49823C7: core_handler (sigevent.c:261)
==443593== by 0x4DC4DBF: ??? (in /usr/lib64/libc.so.6)
==443593== by 0x4E1156B: __pthread_kill_implementation (in /usr/lib64/libc.so.6)
==443593== by 0x4DC4D15: raise (in /usr/lib64/libc.so.6)
==443593== by 0x4D987F2: abort (in /usr/lib64/libc.so.6)
==443593== by 0x49C3064: _zlog_assert_failed (zlog.c:700)
==443593== by 0x4F5E6D: zebra_vxlan_if_vni_find (zebra_vxlan_if.c:661)
==443593== by 0x4EEAC3: zebra_vxlan_check_readd_vtep (zebra_vxlan.c:4244)
==443593== by 0x450967: netlink_macfdb_change (rt_netlink.c:3722)
==443593== by 0x450011: netlink_neigh_change (rt_netlink.c:4458)
'''
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Properly handle ipv6-mapped-ipv4 with DVNI by converting
the address to ipv4 and setting that as the DST field for
the encap.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Don't install implict NULL labels with non-vni label'd
routes.
This returns behavior to how it was before adding the DVNI code.
Ticket: #2677036
Testing Done: precommit, manual
Signed-off-by: Stephen Worley <sworley@nvidia.com>
Encode the vni label during route install on linux
systems via lwt encap 64bit LWTUNNEL_IP_ID. The kernel expects
this in network byte order, so we convert it.
Signed-off-by: Stephen Worley <sworley@nvidia.com>
This patch addresses fix for issues found during static analysis.
rt_netlink - initialise vtep if there is NDA_DST attribute
if_netlink - initialise vni_start and vni_end
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This patch addresses following issues,
- When the VLAN-VNI mapping is configured via a map and not using
individual VXLAN interfaces, upon removal of a VNI ensure that the
remote FDB entries are uninstalled correctly.
- When VNI configuration is performed using VLAN-VNI mapping (i.e., without
individual VXLAN interfaces) and flooded traffic is handled via multicast,
the multicast group corresponding to the VNI needs to be explicitly read
from the bridge FDB. This is relevant in the case of netlink interface to
the kernel and for the scenario where a new VNI is provisioned or comes up.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This change brings in following functionality
- netlink_bridge_vxlan_vlan_vni_map_update for single vxlan devices
This function is responsible for reading the vlan-vni map information
received from netlink and populating a new hash_table with the vlan-vni
data. Once all the vlan-vni data is collected, zebra_vxlan_if_vni_table_add_update
is called to update vni_table in vxlan interface and process each of the
vlan-vni data.
- refactoring changes for zevpn_build_hash_table
- existing zevpn_build_hash_table was walking over all the vxlan interfaces
and then processing the vni for each of them. In case of single vxlan device,
we will have more than one vni entries. This function is abstracted so that
it iterates over all the vni entries for single vxlan device. For traditional
vxlan device the zebra_vxlan_if_vni_iterate would only process single vni
associated with that device.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
dplane_mac_info and dplane_neigh_info is modified to be vni aware.
dplane_rem_mac_add/del dplane_mac_init is modified to be vni aware.
During dplane context update (mac and neigh), we use the vni information
and if set, corresponding netlink attribute NDA_SRC_VNI is set and passed to the
dplane.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This change set introduces data structure changes required for multiple vlan aware bridge
functionality. A new structure zebra_l2_bridge_if encapsulates the vlan to access_bd
association of the bridge. A vlan_table hash_table is used to record each instance
of the vlan to access_bd of the bridge via zebra_l2_bridge_vlan structure.
vxlan iftype derivation: netlink attribute IFLA_VXLAN_COLLECT_METADATA is used
to derive the iftype of the vxlan device. If the attribute is present, then the
vxlan interface is treated as single vxlan device, otherwise it would default to
traditional vxlan device.
zebra_vxlan_check_readd_vtep, zebra_vxlan_dp_network_mac_add/del is modified to
be vni aware.
mac_fdb_read_for_bridge - is modified to be (vlan, bridge) aware
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
This changeset introduces the data structure changes needed for
single vxlan device functionality. A new struct zebra_vxlan_vni_info
encodes the iftype and vni information for vxlan device.
The change addresses related access changes of the new data structure
fields from different files
zebra_vty is modified to take care of the vni dump information according
to the new vni data structure for vxlan devices.
Signed-off-by: Sharath Ramamurthy <sramamurthy@nvidia.com>
fpm:netlink format doesn't indicate the protocol information
in routes of BGP, OSPF and other protocols. Routes of those
protocols just indicate protocol as zebra.
The below route is actually BGP route but 'proto': 11
indicates that it is zebra.
{'attrs': [('RTA_DST', 'dummy'),
('RTA_PRIORITY', 0),
('RTA_GATEWAY', 'dummy'),
('RTA_OIF', 2)],
'dst_len': 32,
'family': 2,
'flags': 0,
'header': {'flags': 1025,
'length': 60,
'pid': 3160253895,
'sequence_number': 0,
'type': 24},
'proto': 11,
'scope': 0,
'src_len': 0,
'table': 254,
'tos': 0,
'type': 1}
with this change it is now seen with 'proto': 186
indicates that it is BGP.
{'attrs': [('RTA_DST', 'dummy'),
('RTA_PRIORITY', 0),
('RTA_GATEWAY', 'dummy'),
('RTA_OIF', 2)],
'dst_len': 32,
'family': 2,
'flags': 0,
'header': {'flags': 1025,
'length': 60,
'pid': 3160253895,
'sequence_number': 0,
'type': 24},
'proto': 186,
'scope': 0,
'src_len': 0,
'table': 254,
'tos': 0,
'type': 1}
Signed-off-by: Spoorthi K <spk@redhat.com>
When FRR receives a route from the kernel about the route
offload success/failure. The metric being reported is not
going to be correct since we may not know it appropriately
at this point in time. If we can set the metric to something
appropriate.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
netlink_route_multipath_msg_encode checks whether the local kernel
supports NextHop Netlink message and doesn't send the message if the
local kernel doesn't have support. This is also applied to the FPM since
kernel dataplane and FPM shares the same code. However, for the FPM,
it's not necessary to have this limit.
This commit adds extra check if netlink_route_multipath_msg_encode is
called from the FPM and bypass kernel support check if it is from the
FPM.
Signed-off-by: Yutaro Hayakawa <yutaro.hayakawa@isovalent.com>
Address Sanitizer found this:
=================================================================
==418623==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 128 byte(s) in 4 object(s) allocated from:
#0 0x4bd732 in calloc (/usr/lib/frr/zebra+0x4bd732)
#1 0x7feaeab8f798 in qcalloc /home/sharpd/frr8/lib/memory.c:116:27
#2 0x7feaeaba40f4 in nexthop_group_new /home/sharpd/frr8/lib/nexthop_group.c:270:9
#3 0x56859b in netlink_route_change_read_unicast /home/sharpd/frr8/zebra/rt_netlink.c:950:9
#4 0x5651c2 in netlink_route_change /home/sharpd/frr8/zebra/rt_netlink.c:1204:2
#5 0x54af15 in netlink_information_fetch /home/sharpd/frr8/zebra/kernel_netlink.c:407:10
#6 0x53e7a3 in netlink_parse_info /home/sharpd/frr8/zebra/kernel_netlink.c:1184:12
#7 0x548d46 in kernel_read /home/sharpd/frr8/zebra/kernel_netlink.c:501:2
#8 0x7feaeacc87f6 in thread_call /home/sharpd/frr8/lib/thread.c:2006:2
#9 0x7feaeab36503 in frr_run /home/sharpd/frr8/lib/libfrr.c:1198:3
#10 0x550d38 in main /home/sharpd/frr8/zebra/main.c:476:2
#11 0x7feaea492d09 in __libc_start_main csu/../csu/libc-start.c:308:16
Indirect leak of 576 byte(s) in 4 object(s) allocated from:
#0 0x4bd732 in calloc (/usr/lib/frr/zebra+0x4bd732)
#1 0x7feaeab8f798 in qcalloc /home/sharpd/frr8/lib/memory.c:116:27
#2 0x7feaeab9b3f8 in nexthop_new /home/sharpd/frr8/lib/nexthop.c:373:7
#3 0x56875e in netlink_route_change_read_unicast /home/sharpd/frr8/zebra/rt_netlink.c:960:15
#4 0x5651c2 in netlink_route_change /home/sharpd/frr8/zebra/rt_netlink.c:1204:2
#5 0x54af15 in netlink_information_fetch /home/sharpd/frr8/zebra/kernel_netlink.c:407:10
#6 0x53e7a3 in netlink_parse_info /home/sharpd/frr8/zebra/kernel_netlink.c:1184:12
#7 0x548d46 in kernel_read /home/sharpd/frr8/zebra/kernel_netlink.c:501:2
#8 0x7feaeacc87f6 in thread_call /home/sharpd/frr8/lib/thread.c:2006:2
#9 0x7feaeab36503 in frr_run /home/sharpd/frr8/lib/libfrr.c:1198:3
#10 0x550d38 in main /home/sharpd/frr8/zebra/main.c:476:2
#11 0x7feaea492d09 in __libc_start_main csu/../csu/libc-start.c:308:16
SUMMARY: AddressSanitizer: 704 byte(s) leaked in 8 allocation(s).
Fix this!
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add the initial step of passing in a dplane context
to reading route netlink messages. This code
will be run in two contexts:
a) The normal pthread for reading netlink messages from
the kernel
b) The dplane_fpm_nl pthread.
The goal of this commit is too just allow a) to work
b) will be filled in in the future. Effectively
everything should still be working as it should
pre this change. We will just possibly allow
the passing of the context around( but not used )
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
FRR does not use the NLM_F_APPEND semantics ( in fact I would argue that
the NLM_F_APPEND semantics just introduce pain for all parties involved )
I would also argue that most people who use the kernel netlink api
have recognized that NLM_F_APPEND for a route is a recipe for disaster
that is well documented and as such it is not used as anything other
than a curiousity by operators.
See:
https://bugzilla.redhat.com/show_bug.cgi?id=1337855https://github.com/thom311/libnl/issues/226
Are 2 great examples of how confusing it is for anyone in user
space to know what the correct thing to do is. Given that
new fields can be added with no semantics to allow us to know
what has resulted in a change or not.
In an attempt to recognize this, let's note that FRR
believes it has gotten out of sync with the kernel.
Future commits will react to the desynchronized route
and request from the kernel a reload of that specific
route if possible.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The new route code path was using a combination of
both rib_add() and rib_add_multipath() let's clean
it up some to use rib_add_multipath()
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
