It doesn't make much sense for a hash function to modify its argument,
so const the hash input.
BGP does it in a couple places, those cast away the const. Not great but
not any worse than it was.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The upcoming gRPC-based northbound plugin will run on a separate
pthread, and it will need to have access to the running configuration
global variable. Introduce a rw-lock to control concurrent access
to the running configuration. Add the lock inside the "nb_config"
structure so that it can be used to protect candidate configurations
as well (this might be necessary depending on the threading scheme
of future northbound plugins).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Two different definitions of "enum filter_type" exist in libfrr:
one in lib/filter.h and other in lib/command_match.h. Rename one
of them to resolve a conflict that happens when both headers are
included by the same file.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
FRR log targets are independent, so "log syslog" must not disable
"log file" output.
Fixes: #3551
Fixes: 0204baa876
Signed-off-by: David Lamparter <equinox@diac24.net>
We can make use of the vty->config variable to know when the CLI
user is in the configuration mode or not. This is much simpler
than obtaining this information from the vty node, and also a more
robust solution (the three switch statements below, for example,
were out of sync).
Also, fix a bug where vty->config wasn't being unset in the
vty_config_exit() function (bug introduced by commit f344c66ea3).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The CLI code uses the vty->xpath[] array and the vty->xpath_index
variables to keep track of where the user is in the configuration
hierarchy. As such, we were resetting vty->xpath_index to zero
whenever the user exited from the configuration mode in order to
keep the index valid. We weren't doing this in the vty_stop_input()
function however, which is called when the user types ^C in the
terminal. This was leading to bugs like this:
zebra> en
zebra# conf t
zebra(config)# interface eth0
zebra(config-if)# ^C
zebra# conf t
zebra(config)# interface eth0
% Configuration failed.
Schema node not found.
YANG path: /frr-interface:lib/interface[name='eth0'][vrf='default']/frr-interface:lib
To fix this, do something more clever: instead of resetting the
XPath index whenever the user exits from the configuration mode,
do that when the user enters in the configuration mode. This way
the XPath index needs to be reset in a single place only, not to
mention it's a more robust solution.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
A while ago all FRR configuration commands were converted to use the
QOBJ infrastructure to keep track of configuration objects. This
means the configuration lock isn't necessary anymore because the
QOBJ code detects when someones tries to edit a configuration object
that was deleted and react accordingly (log an error and abort the
command). The possibility of accessing dangling pointers doesn't
exist anymore since vty->index was removed.
Summary of the changes:
* remove the configuration lock and the vty_config_lockless() function.
* rename vty_config_unlock() to vty_config_exit() since we need to
clean up a few things when exiting from the configuration mode.
* rename vty_config_lock() to vty_config_enter() to remove code
duplication that existed between the three different "configuration"
commands (terminal, private and exclusive).
Configuration commands converted to the new northbound model don't
need the configuration lock either since the northbound API also
detects when someone tries to edit a configuration object that
doesn't exist anymore.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When editing the candidate configuration, the northbound must ensure
that either all changes made by a command are accepted or none are.
This is done to prevent inconsistent states where only parts of a
command are applied in the event any error happens.
The previous API for converted commands, the nb_cli_cfg_change()
function, required callers to pass an array containing all changes
that needed to be applied in the candidate configuration. The
problem with this API is that it was very inconvenient for complex
commands, which change different configuration options depending
on several factors. This required users to manipulate the array
of configuration changes using low-level primitives, making it
complicated to implement some commands.
To solve this problem, introduce a new API based on the two following
functions:
- nb_cli_enqueue_change()
- nb_cli_apply_changes()
The first function is used to enqueue configuration changes, one
at time. Then the nb_cli_apply_changes() function is used to apply
all the enqueued configuration changes.
To implement this, a static-sized array was allocated in the "vty"
structure, along with a counter of enqueued changes. This eliminates
the need to declare an array of configuration changes in every
converted CLI command, simplifying things quite considerably.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
The CMD_SUCCESS_DAEMON case should be excluded from storing the command line
that we think failed.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The ->hash_cmp and linked list ->cmp functions were sometimes
being used interchangeably and this really is not a good
thing. So let's modify the hash_cmp function pointer to return
a boolean and convert everything to use the new syntax.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When reading in config files and we have failures on multiple
lines actually note the actual failure lines and return them.
This fixes an issue where we stopped counting errors after
the first one and we got missleading line numbers that
did not correspond to the actual problem.
This is fixed:
sharpd@donna ~/frr> sudo /usr/lib/frr/pimd --log=stdout -A 127.0.0.1 -f /etc/frr/pimd.conf
2018/10/11 09:41:01 PIM: VRF Created: default(0)
2018/10/11 09:41:01 PIM: pim_vrf_enable: for default
2018/10/11 09:41:01 PIM: zclient_lookup_sched_now: zclient lookup immediate connection scheduled
2018/10/11 09:41:01 PIM: zclient_lookup_new: zclient lookup socket initialized
2018/10/11 09:41:01 PIM: pimd 6.1-dev starting: vty@2611
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 2: inteface lo
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 3: ip igmp
2018/10/11 09:41:01 PIM: [EC 100663304] ERROR: No such command on config line 4: ip igmp join 224.1.1.1 13.13.13.2
^C2018/10/11 09:45:09 PIM: Terminating on signal SIGINT
2018/10/11 09:45:09 PIM: VRF Deletion: default(0)
Fixes: #3161
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
fabricd is built using the sources of isisd. To allow differentiation
in the code, -DFABRICD=1 is added to its preprocessor flags.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Add a new error code LIB_ERR_SYSTEM_CALL to the ferr subsystem.
Additionally convert LIB_ERR_VRF_SOCKET to a more generic
LIB_ERR_SOCKET.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Implement vty shell integration and allow `bfdd` to be configured
through FRR's vtysh.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Previous correction (2c2d5cb397) was not enough,
so now it is ensured that the argument shift is not negative nor zero.
Signed-off-by: F. Aragon <paco@voltanet.io>
Add the ability to specify the designated log level at startup.
--log-level <emergencies|alerts|critical|errors|warnings|notifications|informational|debugging>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we are starting a daemon, allow the user to specify:
--log <stdout|syslog|file:file_name>
This can be used on early startup to put the log files
where the end user wants them to show up.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Sometimes output would be mangled when filtering with include as a
result of the following bugs:
* Filters were applied per each call to vty_out() instead of buffering
until a line break and then applying
* Long output would sometimes be cut due to using the wrong buffer
pointer
Also remove the trailing \n as it should no longer be necessary to
ensure the vty prompt ends up on a new line.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Add function to move all data to the start of a vector by shifting
over contiguous empty slots
* Use this function to remove empty slots leftover after
frrstr_filter_vec
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Fix potential NULL dereference
* Fix use of uninitialized value
* Fix leaking memory by not freeing regex_t
* Fix extra \n when using empty regex filter
* Clean up still-reachable hook memory
* Handle nonexistent pager
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
An optimized version of this has already been implemented within graph.c
that assumes some specialized constraints for that code. It's generally
useful so this change implements a general purpose version of it.
This fixes cmd_make_strvec() that was broken by some code shuffling in
previous commits.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
* Rewrite pager implementation
* Replace fprintf() with vty_out()
* Modify vty_out() for better vtysh support
* Remove static global outputfile var
* Remove fp argument from many vtysh functions
* Add some docs for stuff along the way
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This patch adds a CLI preprocessor function that activates when `|` is
found in the command. This is the start of adding support for some text
processing utilities intended for inline use. The first one implemented
here is `| include`, which provides grep-like filtering of command
output.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This patch adds a hook point intended to allow subscribers to modify the
raw text of a CLI command before it is passed to the rest of the CLI
pipeline. To give access to the raw text of the command, a new function
for executing CLI has been defined whose only difference from
`cmd_execute_command` is that it accepts the command to execute as a
string rather than as a string vector.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
I see lots of the same code being copy-pasted and slightly tweaked for
string processing all over the codebase. Time to start aggregating these
pieces into something consistent and correct.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The warning string which appears when the users executes 'no (enable)
password' was moved into command.h and declared as a constant named
'NO_PASSWD_CMD_WARNING'.
This avoids duplicate code and makes it easy to change the warning
message in all places at once.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
When the user executes one of the commands 'no password' or 'no enable
password', a warning message gets shown to inform the user of the
security implications.
While the current implementation works, a warning message gets printed
once for each daemon, which can lead to seeing the same message many
times. This does not affect functionality, but looks like an error to
the user as it can be seen within issue #1432.
This commit only prints the warning message inside lib when vtysh
dispatch is not being used. Additionally, the warning message was copied
into the vtysh command handlers, so that they get printed exactly once.
Signed-off-by: Pascal Mathis <mail@pascalmathis.com>
