Add "show motd" commad.
The vtysh user can call the "show motd" command to re-show the welcome message.
This is necessary if the user saves frequently used commands in motd.
Signed-off-by: Sergei Rozhkov <gh@zserg.ru>
Use %pI4/%pI6 where possible, otherwise at least atjust stack buffer sizes
for inet_ntop() calls.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
bgp_pcount_adjust() is called only when calling bgp_path_info_set_flag().
Before this patch the pcount is not advanced before checking for overflow.
Additionally, print:
```
[RZMGQ-A03CG] 192.168.255.1(r1) rcvd UPDATE about 172.16.255.254/32 IPv4 unicast -- DENIED due to: maximum-prefix overflow
```
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The ospf6_route_cmp_nexthops function was returning 0 for same
and 1 for not same. Let's reverse the polarity and actually make
the returns useful long term.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Every 1/2 hour my logs are filling up with this:
2022-11-26 13:54:47.531 [DEBG] ospfd: [P4PQ9-K4XFD] DR-Election[1st]: Backup 192.168.119.229
2022-11-26 13:54:47.531 [DEBG] ospfd: [HBZ7F-65Y86] DR-Election[1st]: DR 192.168.119.229
2022-11-26 13:54:47.531 [DEBG] ospfd: [H01MF-RN00N] DR-Election[2nd]: Backup 0.0.0.0
2022-11-26 13:54:47.531 [DEBG] ospfd: [R7BJ4-KP8JT] DR-Election[2nd]: DR 192.168.119.229
This should be guarded by an if check to ensure that the operator really
wants to see this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
My log file is filling up with:
2022-11-26 13:24:47.532 [DEBG] ospfd: [RY794-DQ7AK] interface 192.168.119.229 [2] join AllDRouters Multicast group.
Every 1/2 hour. There is nothing an operator needs to do here and nothing
that they can change. Let's guard this output.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
add a test dedicated to confederation. it also take into
account the support of AS memberwith same id that the
confederation id.
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
Add some `pragma`s to handle errors that the C/C++ extension is not able
to understand.
Move `TRANSPARENT_UNION` to `lib/compiler.h` for consistency.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
If we enable MPLS for an interface via sysctl, we should write `mpls enable`,
not `mpls`.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
Since the `echo PING` commands are from watchfrr and are sent
a whole bunch when an operator has `log commands` on the amount
of logging done is quite significant.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
The recent tracepoint additions in c317d3f246
did not properly setup the tracepoints for lttng. Fix this.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Simplify all DEFUNs by moving all logic to the northbound translation
function and transforming all function parameters into a single
structure.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
currently the following configuration
dut:
!
interface ntfp2
ip router isis 1
!
router bgp 200
no bgp ebgp-requires-policy
bgp confederation identifier 300
bgp confederation peers 300
neighbor 192.168.1.1 remote-as 100
neighbor 192.168.2.2 remote-as 300
!
address-family ipv4 unicast
neighbor 192.168.2.2 default-originate
exit-address-family
!
router isis 1
is-type level-2-only
net 49.0001.0002.0002.0002.00
redistribute ipv4 connected level-2
!
end
router:
!
interface ntfp2
ip router isis 1
isis circuit-type level-2-only
!
router bgp 300
no bgp ebgp-requires-policy
bgp confederation identifier 300
bgp confederation peers 200
neighbor 192.168.2.1 remote-as 200
neighbor 192.168.3.2 remote-as 400
!
address-family ipv4 unicast
network 3.3.3.0/24
exit-address-family
!
router isis 1
is-type level-2-only
net 49.0001.0003.0003.0003.00
redistribute ipv4 connected level-2
!
end
on dut result of show bgp ipv4 unicast command is:
show bgp ipv4 unicast
BGP table version is 1, local router ID is 192.168.2.1, vrf id 0
Default local pref 100, local AS 200
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 192.168.1.1 0 0 100 i
instead of
sho bgp ipv4 unicast
BGP table version is 3, local router ID is 192.168.2.1, vrf id 0
Default local pref 100, local AS 200
Status codes: s suppressed, d damped, h history, * valid, > best, = multipath,
i internal, r RIB-failure, S Stale, R Removed
Nexthop codes: @NNN nexthop's vrf id, < announce-nh-self
Origin codes: i - IGP, e - EGP, ? - incomplete
RPKI validation codes: V valid, I invalid, N Not found
Network Next Hop Metric LocPrf Weight Path
*> 1.1.1.0/24 192.168.1.1 0 0 100 i
*> 3.3.3.0/24 192.168.2.2 0 100 0 (300) i
*> 4.4.4.0/24 192.168.3.2 0 100 0 (300) 400 i
Displayed 3 routes and 3 total paths
According to RFC 5065:the usage of one of the member AS number as the
confederation identifier is not forbidden.
fixes are the following
in bgp_route.c:
in bgp_update remove the test for presence of confederation id in
as_path since, this case is allowed;
in bgp_vty.c
bgp_confederation_peers, remove the test on peer as value
in bgpd.c
bgp_confederation_peers_add
remove the test on peer as value
invert the order of setting peer->sort value and peer->local_as,
since peer->sort is depending from current peer->local_as value
bgp_confederation_peers_remove
invert the order of setting peer->sort value and peer->local_as,
since peer->sort is depending from current peer->local_as value
Signed-off-by: Francois Dumontet <francois.dumontet@6wind.com>
This commit adds a new option to control whether a VRRPv3 group
accepts / computes its checksum with a prepended IPv4 pseudoheader.
This should improve interoperability with other devices.
Signed-off-by: Siger Yang <siger.yang@outlook.com>
Commit 8f359e1593 removed a check that prevented the same route
from being added twice. In certain topologies, that change resulted in
the following infinite loop when adding an ASBR route:
ospf6_route_add
ospf6_top_brouter_hook_add
ospf6_abr_examin_brouter
ospf6_abr_examin_summary
ospf6_route_add
(repeat until stack overflow)
Revert the offending commit and update `ospf6_route_is_identical()` to
not do comparison using `memcmp()`.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Before this patch, data is flushed, and we can't see the data after we send
the notification.
Signed-off-by: Donatas Abraitis <donatas@opensourcerouting.org>
The imported BFD code had some logic to ignore the source address when
using single hop IPv4. The BFD peer socket function should allow the
source to be selected so we can:
1. Select the source address in the outgoing packets
2. Only receive packets from that specific source
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Previous commit changes the order of srv6 locator parameters. So, this
PR reflect the previous changes.
Signed-off-by: Ryoga Saito <ryoga.saito@linecorp.com>
