This will allow the end-user to clear the counters associated
with the route-map. Subsuquent `show route-map ..` commands
will display counters since the last clear.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a note in the fedora build guide on how to disable
firewalld and clear iptables that come by default.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The `neighbor X:X::X default-originate command is complaining
that:
The route-map '(null)' does not exist.
Upon inspection of the code we were passing a NULL
string to the lookup. Testing for null gets us this:
donna.cumulusnetworks.com# conf t
donna.cumulusnetworks.com(config)# router bgp 99
donna.cumulusnetworks.com(config-router)# neighbor 2001:1::1:2 remote-as 99
donna.cumulusnetworks.com(config-router)# neighbor 2001:1::1:2 default-originate
donna.cumulusnetworks.com(config-router)# end
donna.cumulusnetworks.com# show run
Building configuration...
Current configuration:
!
frr version 7.2-dev
frr defaults datacenter
hostname donna.cumulusnetworks.com
log stdout
no ipv6 forwarding
!
ip route 4.5.6.7/32 10.50.11.4
!
router bgp 99
neighbor 2001:1::1:2 remote-as 99
!
address-family ipv4 unicast
neighbor 2001:1::1:2 default-originate
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The failed neighbor event logging that was recently added in
commit: 3acae086ba
cast a bit too broad of a stroke. We should only inform
the user that we were ignoring the RTM_NEWNEIGH FAIL callback
when we believe it was one of our own 5549 entries.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When dumping rib data about a route for `debug rib detail`
modify the dump command to display the prefix as part
of every line so that we can use a grep on the log
file.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There has never been a `debug igmp trace detail` but we have
had code to display this when we had the appropriate flags
set. Since we never can accept this, let's remove this.
This showed up because of commit:0ab16492d2d9fcc6cba7e001227deed6765ed261
where we re-arranged some debugs to combine them being turned on.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When a prefix-list is applied to a BGP neighbor to deny the learning
of specific routes, the hit count is showing 0 for BGP even though
the routes are being filtered correctly due
to the configured prefix-list.
Before fix:
c1# show ip prefix-list nag seq 10
ZEBRA: seq 10 permit any (hit count: 0, refcount: 0)
BGP: seq 10 permit any (hit count: 0, refcount: 0)
c1# show ip prefix-list nag seq 5
ZEBRA: seq 5 deny 1.0.1.0/24 (hit count: 0, refcount: 0)
BGP: seq 5 deny 1.0.1.0/24 (hit count: 0, refcount: 0)
Fix: Increment the prefix-list's hit count whenever a rule match occurs.
After Fix:
c1# show ip prefix-list nag seq 10
ZEBRA: seq 10 permit any (hit count: 0, refcount: 0)
BGP: seq 10 permit any (hit count: 6, refcount: 0)
c1# show ip prefix-list nag seq 5
ZEBRA: seq 5 deny 1.0.1.0/24 (hit count: 0, refcount: 0)
BGP: seq 5 deny 1.0.1.0/24 (hit count: 1, refcount: 0)
Signed-off-by: Visakha Erina visakha.erina@broadcom.com
If we create a channel_oil ensure that all paths that
we can go down will create one. Future commits
can remove the (up->channel_oil) tests.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There is no need to check for ALLOC function failures
in the code base. If we cannot get more memory we
assert.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Adding a read with the address of the thread pointer we want to
use will allow lib/thread.c to properly handle your thread pointers.
Instead we were setting the pointer to NULL before we passed
into the _read and _write thread functions. Remove the NULL
pointer set and just let thread.c handle everything.
vty_stdio_resume and vty_read would blindly add read and write
which would cause vty_event() to drop the thread pointer.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When BGP daemon is down, Clean up its configuration state from zebra.
When the BGP daemon is up again, it will push its configuration to zebra
Delete the MAC and neighbor information received on the BGP session,
while retaining the local MAC and local ARP entries.
Signed-off-by: Kishore Aramalla karamalla@vmware.com
Use %% style for errors in log commands and switch
tabs to a single space in output. Also, remove un-needed
output for success.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Adding in the command `show log-filter` made `show log`
ambiguous. Change the checkRouterRunning() test to do
full `show logging` so it works again.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add vrrpd and sharpd to the DAEMONS_* list so they
can be dispatched daemons independent commands
such as `show work-queues` and `log-filter`.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add some user documentation for applying/deleting/showing
log filters with the new commands.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
As logging functions are called, if filters are stored,
look for the filter substring in the logs. If it is not
found, do not output the log to a file or stdout.
If the filter is matched, handle the log call per usual.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add vtysh commands to add/del/clear/show filters across
all daemons and independently on each one. Add automake and
clippy boilerplate for those commands as well.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Update show work-queue to use the execute_name() code
path when dispatching to a specific daemon.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add static function path for exectuting a command
on a client daemon via a string of its name only.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Simplify the code in deleting a filter by using memmove rather
than iterating. Memmove handles overlapping strings safely so
this is fine here.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Add code for manipulation/creation of log filters
and their table. Specifically, add lookup,clear,add,del,dump
functionality.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Problem discovered in testing that occasionally when an interface
address was flushed, the corresponding route would be removed from
the kernel and zebra but remain in the bgp table and be advertised
to peers. Discovered that when zebra_rib_evaluate_nexthops spun
thru the tree list of rns, if the timing and circumstances were
right, it would move elements and miss evaluating some. Changed
from frr_each to frr_each_safe and the problem is now gone.
Ticket: CM-25301
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
FRR has a provision to give exact-match in match clause for
standard community, but this option is missing for lcommunity.
Part 3 : show related changes for match clause
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
FRR has a provision to give exact-match in match clause for
standard community, but this option is missing for lcommunity.
Part 2 : CLI related changes for match clause
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
FRR has a provision to give exact-match in match clause for
standard community, but this option is missing for lcommunity.
Part 1 : Added support in clist lib
Signed-off-by: vishaldhingra <vdhingra@vmware.com>
Add a expected count for the route node we will be processing
as part of nexthop resolution and modify the type to display
a useful string of what the type is instead of a number.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `bgp multiple-instance` command has been deprecated and
removed. Finish off this by removing it from topotests too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The `bgp multiple-instance` command has been removed but
we did not properly update the documentation. Let's do so.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This code is not returned anywhere in the system as that bgp
is by default multiple-instance 'only' now. So remove
the last remaining bits of it from the code base.
Remove BGP_ERR_MULTIPLE_INSTANCE_USED too.
Make bgp_get explicitly return BGP_SUCCESS
instead of 0.
Remove the multi-instance error code too.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
There exists a state where we may have a rd node but no individual
evpn prefix nodes in the two level table:
(gdb) bt
at bgpd/bgp_evpn_vty.c:1190
filter=FILTER_RELAXED) at lib/command.c:1060
at lib/command.c:1119
vtysh=vtysh@entry=0) at lib/command.c:1273
(gdb) f 5
at bgpd/bgp_evpn_vty.c:1190
1190 bgpd/bgp_evpn_vty.c: No such file or directory.
(gdb) p buf
$1 = "[2]:[0]:[48]:[00:00:00:00:00:00]", '\000' <repeats 240 times>...
(gdb) p json_nroute
$2 = (json_object *) 0x0
(gdb) p rd_header
$3 = 1
(gdb) p buf
$4 = "[2]:[0]:[48]:[00:00:00:00:00:00]", '\000' <repeats 240 times>...
(gdb)
I'm not entirely sure that this is not a `different` problem in that the
rd node should have been removed. But I think preventing the crash
in a show command is probably the right thing to do here.
Fixes: #4501
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
On interface up/down, bgp stores the mac address of the interface
in a bgp_mac_hash table entry and then initiates a rescan
of the evpn l2vpn table. The problem with this scan is that
it is looking at every item in the table when only 1 mac
has changed. So every up/down event causes some major trauma
in the bgp_update processing.
Modify the mac scanning such that we know the mac that is changed
and as such we should reprocess those entries only.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Add a bit of extra code to indicate to the operator why
we intentionally rejected a kernel route from being used.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
