We have this pattern in the code base:
if (thread)
THREAD_OFF(thread);
If we look at THREAD_OFF we check to see if thread
is non-null too. So we have a double check.
This is unnecessary. Convert to just using THREAD_OFF
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Instead of closing the socket, just note the failure and
continue on. If we actually failed here so many other
things would not be working at all, that actually
closing the fd won't matter.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
When the ASBR stops announcing a prefix into the NSSA area, the LSA
type 7 is removed from the area. However the ABR is refreshing the
type 5 in its LSDB while removing the Type 7 LSA. Routers outside
the area do not get an update.
With the following topology: r1---r2---r3, with r3 being the ASBR
announcing type 7 LSA:
r3 configuration
router ospf
redistribute static
network 10.0.23.0/24 area 1
area 1 nssa
!
We stop announcing prefix 3.3.3.3 in the ASBR
r3# conf
r3(config)# router ospf
r3(config-router)# no redistribute static
r3(config-router)#
r2 (ABR)
r2# sh ip os database
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x8000002f 0x13be E2 3.3.3.3/32 [0x0] <-- flushed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 7 0x8000002f 0x73c7 E2 3.3.3.3/32 [0x0] <-- refreshed(?)
With PR#7086 the LSA type 5 is flushed from the LSDB in r2 and the change is
announced to routers outside the area (r1)
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <-- flushed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- flushed
r1# sh ip os da
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- flushed
Unfortunately I just realized that with PR#7086 I'm introducing a new bug, as Type-5 LSA
are not being refreshed when reaching MaxAge
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 35 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <--- refreshed
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <--- not refreshed!
So this PR should fix the original issue and the bug introduced later, so when stopping
redistribution in the ASBR, both type 5 and type 7 are flushed:
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 3600 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0]
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0]
Routers outside the area are also notified
r1# sh ip os da
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 3600 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0]
Re-enabling redistribution, both LSA will be advertised again
r3# conf
r3(config)# router ospf
r3(config-router)# no redistribute static
r3(config-router)# redistribute static
r3(config-router)#
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 19 0x80000001 0x6f90 E2 3.3.3.3/32 [0x0]
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 11 0x80000001 0xcf99 E2 3.3.3.3/32 [0x0]
and they are refreshed when reaching MaxAge
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 33.33.33.33 10 0x80000002 0x6d91 E2 3.3.3.3/32 [0x0] <-- Seq 2
AS External Link States
Link ID ADV Router Age Seq# CkSum Route
3.3.3.3 10.0.25.2 2 0x80000002 0xcd9a E2 3.3.3.3/32 [0x0] <-- Seq 2
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
Having an NSSA ABR redistributing statics, the type-7 LSA are being
continuously refreshed (every ~14 secs). The LSA Seq number keeps
incrementing and the LSA age is going back to 0 when reaching ~14s.
This PR fixes the issue by not forcing the LSA update
However I ignore if the "force" parameter was used in purpose. With this
PR updates are sent in case the metric or metric type are changed
Sep 24 08:54:48 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:55:02 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:55:16 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:55:30 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:55:44 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:55:58 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:56:12 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:56:26 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
Sep 24 08:56:40 r2 ospfd[7137]: ospf_flood_through: LOCAL NSSA FLOOD of Type-7.
ip route 2.2.2.2/32 blackhole
router ospf
network 10.0.23.0/24 area 1
area 1 nssa
!
r2# conf t
r2(config)# router ospf
r2(config-router)# redistribute static
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
2.2.2.2 10.0.25.2 13 0x8000000f 0x3f17 E2 2.2.2.2/32 [0x0] <<< Seq: f, age 13
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
2.2.2.2 10.0.25.2 0 0x80000010 0x3d18 E2 2.2.2.2/32 [0x0] <<< Seq: 10, age 0
r2# sh ip os da
NSSA-external Link States (Area 0.0.0.1 [NSSA])
Link ID ADV Router Age Seq# CkSum Route
2.2.2.2 10.0.25.2 3 0x8000001b 0x2723 E2 2.2.2.2/32 [0x0] <<< Seq: 1b, age 3
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
Description:
Added the following debug commands to enable debugs
GR helper functionality.
[no] debug ospf gr helper
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
The following show commands are added to display helper specific
information.
1.show ip ospf graceful-restart helper [detail] [json]
--> displays user configurations and list of all helpers details.
2.show ip ospf neighbour detail
--> diplays helper details
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
The follwoing helper exit scenarios are handled.
1. Recv Max age grace LSA from RESTARTER.
2. Grace timer expiry.
3. Due to topo change if lsa check is enabled.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
1. Skipping inactivity timer during graceful restart to make
the RESTARTER active even after dead timer expiry.
2. Handling HELPER on unplanned outages.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
1. Ospf dead-interval will be set as 4 times of hello-interval, incase
if it is not set by using "ip ospf dead-interval <dead-val>".
2. On resetting hello-interval using "no ip ospf hello-interval" the
dead interval and hello due will be changed accordingly.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
In a topology like R1 -- R2 -- R5, with R2 being NSSA ABR and R5 being
ASBR redistributing external routes, the ABR R2 will translate type-7
LSA into type-5 and advertise to the backbone. In the current implementation
R2 is also advertising a type-4 LSA when there is no need.
RFC 3101: "...NSSA's border routers never originate Type-4 summary-LSAs
for the NSSA's AS boundary routers, since Type-7 AS-external-LSAs are
never flooded beyond the NSSA's border..."
With this PR a type-4 LSA will not be advertised
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
When the ASBR stops announcing a prefix into the NSSA area, the LSA
type 7 is removed from the area. However the ABR is refreshing the
type 5 in its LSDB while removing the Type 7 LSA. Routers outside
the area do not get an update.
With this change the LSA type 5 is flushed from the LSDB and the
change is announced to routers outside the area
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
1. Fix for duplicating calls of ospf_external_lsa_refresh()
in ospf_distribute_list_update_timer().
2. Added the comment and change from PR 6981.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
If NSSA is enabled before redistribution is configured, Type-7 LSA's
are installed. But if NSSA is enabled after redistribution is
configured, Type-7 LSAs are missing.
With this change, when NSSA is enabled, scan for external LSA's and
if they exist, install Type-7.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
1. Minor change in distribute-list update timer based on lsa flag.
Co-authored-by: harios <hari@niralnetworks.com>
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
In the context of TI-LFA it is necessary to have multiple
representations of SPFs for so called P and Q spaces. Hence it makes
sense to start with fresh vertex lists, and only delete them when
the SPF calculation is not a 'dry run'.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Following PR #6726, Coverity Scan detected some new errors in the OSPF Segment
Routing code. This patch corrects them.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
OSPFD sends ARP proactively to speed up convergence for /32 networks
on a p2p connection. It is only an optimization, so it can be disabled.
It is enabled by default.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
PR #6416 that solves opsf crash when segment routing is restarted, introduce a
regression in Extended Prefix flooding: when segment routing prefix is modified
or removed, new segment routing prefix is no more flooded. This patch correct
this regression.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add new option to `segment-routing prefix` command to set the
Explcit Null flag in addition to the No-PHP flag. MPLS LFIB configuration
has been also updated to take into account the Explicit Null flag.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
RFC 8665 defines a Segment Routing Local Block for Adjacency SID.
This patch provides the possibility to modify the SRLB as well as
reserved the block range from the Label Manager.
- Introduce new CLI 'segment-routing local-block'
- Add local block to SRDB structure
- Parse / Serialize SRLB in Router Information LSA
- Update OSPF-SR topotest
- Update documentation
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Segment Routing Global Block is now using the Label Manager to reserved
label range. Label Manager connection uses the synchronous mode and dedicated
thread timer is used to establish the connection in safe manner without
blocking OSPFd is the Label Manager is not available.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
In the case of P2P links it is possible to use IP unnumbered which
yields a strong dependency to the interface data for nexthop
resolution in the SPF calculations. While the SPF code strives to
be as independent of non-LSA data as possible there is no way
around here: one has to resolve the nexthop for such a special case
using the interface data.
For this purpose a new flag 'spf_root_node' is introduced to signal
that interface data can be used for P2P links. For now this flag is
always 'true' since the SPF currently always uses the calculating
node as the root node. This will change with the introduction of
TI-LFA where other nodes can be root nodes.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
in OSPF interface data is used for the nexthop resolution
during the SPF algorithm, see RFC2328 16.1.1. However, for
certain technologies like TI-LFA it is desirable to be able
to calculate SPFs for arbitrary root nodes, not just the
calculating node. Since interface data is not available for
other nodes it is necessary to remove this dependency and
make its usage optional, depending on the intent of
changing the RIB with the generated tree (or not).
To signal that a SPF run is used without the intent to
change the RIB an additional flag `spf_dry_run` is
introduced to the ospf_area struct. This flag is currently
only used within the pure SPF code but will be extended
to the SPF postprocessing later on.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Just non-functional changes, cosmetics, removal of eye
cancer. The intention here is to make the SPF code more
approachable.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Router Information are contained in opaque LSAs and when such a LSA
is received a new SR node for the advertising router is created.
However, the RI related data is currently not set when such a SR node
already exists. This can happen when e.g. link and prefix information
arrive before the RI and therefore an SR node is created.
This is now fixed by setting the data everytime the RI is received,
independent of the SR node already existing or not.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
The `INET_ADDRSTRLEN` is 16 and is only enough to format an IPv4 address.
So when there is a prefix (`/xx`), the debug output may get truncated.
Use `PREFIX2STR_BUFFER` macro instead to fix the issue.
Signed-off-by: Aaron LI <aly@aaronly.me>
If you configure an area range in decimal format, the running
configuration displays it in dotted format.
Call ospf_area_display_format_set() for area range command,
as it is done for other variants.
Signed-off-by: Duncan Eastoe <duncan.eastoe@att.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
BFD profiles can now be used on the interface level like this:
interface eth1
ip router isis 1
isis bfd
isis bfd profile default
Here the 'default' profile needs to be specified as usual in the
bfdd configuration.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
On startup of both zebra and ospfd. If ospfd has not
received a valid router-id *but* has received interface
data, interfaces will not be turned on in the state
machine. When ospf finally receives a valid router-id
it would never actually kick the state machine into
action for those interfaces it has been configured for.
Modify ospf on router id changes, *if* the old
router id was INADDR_ANY *and* the interface is
operative *and* the oi->state is ISM_Down, give
it the old kick in the patooeys
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Default originate with route-map was broken. Routemap
was not getting applied for redistribute route but was
getting applied default route itself. No default route
was originated even when routemap was satisfied.
Signed-off-by: Santosh P K <sapk@vmware.com>
Fix a number of library and daemon issues so that daemons can
call frr_fini() during normal termination. Without this,
temporary logging files are left behind in /var/tmp/frr/.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
For coherency, move and rename functions that send MPLS labels configurations
from ospf_sr.c to ospf_zebra.c:
- ospf_zebra_update_prefix_sid()
- ospf_zebra_delete_prefix_sid()
- ospf_zebra_send_adjacency_sid()
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
SIDs are not uninstall in LFIB when ospf adjacenyi or loopback goes down as
self LSA flusing is not handle by ospf_ext_link_lsa_update(). The patch
introduces new functions ospf_sr_ext_itf_add() and ospf_sr_ext_itf_delete() in
ospf_sr.c to directly manage LFIB for SIDs when change is detected in
ospf_ext_link_ism_change() and ospf_ext_link_nsm_change().
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
- Improve parsing of Router Information, especially when a router
stops advertising Segment Routing capabilities
- Finish conversion to '%pFX' and '%pI4'
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
* Change sr_prefix structure in ospf_sr.h to add support to ECMP
* Add new Segment Routing information to ospf_paths in ospf_route.h
* Backport MPLS label configuration from IS-IS Segment Routing implementation
* Re-write log message in ospf_sr.c and ospf_ext.c
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Description:
OSPF uses an algo to generate unique LSIDs when route updates
exists with same adrress and different masklens. It genearates
the unique LSIDs by masking its hostbits.
Ex :
Rt1 : 10.0.0.0/32 - LSID : 10.0.0.0
Rt2 : 10.0.0.0/16 - LSID : 10.0.255.255
Rt3 : 10.0.0.0/24 - LSID : 10.0.0.255
Observed an issue with external LSAs when such routes originated.
If the first route (with actual address as LSID) is got deleted,
the routes with same addresss(different msaks) are failed
to get LSA pointers from LSDB due to current fetching API design.
api : ospf_external_info_find_lsa
Here , it is allowing to look up the LSA with address specific
unique LSID (address with host bits set ex: 10.0.255.255) only
if the LSA exists where LSID as actual address of the route
(ex: 10.0.0.0 ) which is not expected and cauing for other issues.
Fix:
Corrected this logic, by looking up the LSA with unique LSID first
if it doesn’t exist then It is allowing to look up the LSDB with LSID
as address of the route.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Issue number #6291 describes how OSPFd crashes after being deleted and then
added again with configuration when segment routing is used.
The problem occurs in ospf_ri.c because the OspfRI structures retains
the reference to the old area pointer which is mofified when ospfd is
reactivated by configuration. When segment routing is activated, the LSA Router
Information is sent with reference to the old area pointer, instead the new one,
which causes the crash. The same problem is also present in ospf_ext.c with
OspfEXT structure and Extended Link/Prefix structure.
This commit introduces Extended Link/Prefix and Router Information LSAs flusing
when OSPFd is stopped when configuration is removed and adds the correct
initialization to the area pointer in OspfRI and Extended Link/Prefix structure
when OSPFd is re-enabled with the configuration. Area pointer has been removed
from the OspfEXT structure as it is never used with this commit.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
The command `area ... virtual-link ... retransmit-interval` supports
1-65535 range and the documentation already said
`ip ospf retransmit-interval` supports that, lets make the DEFUN to
accept that value.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Description:
When a routemap applied to set a tag, all the permitted routes are
refreshed with new tag, but when a different route map applied with
a different action still the same tag persits in the external route.
The actual tag received from zebra is expected to be set back to the
routes here. Corrected this behaviour by restoring a original tag
received from zebra.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
Route-tag is not set to external lsas originated by ospf when a routemap
applied by setting a specific tag. When applying a route-map on redistribution,
external lsas will be refreshed if there is any change in the route parametrs
after applying routemap. But changing tag is not handled here.
Added the apripriate fix to correct this.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
These are easy to get subtly wrong, and doing so can cause
nondeterministic failures when racing in parallel builds.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
It's possible(but unlikely) that a read of data from the
network will give us bogus data. Don't automatically
just trust the data size from the network and limit
the read to the size of the buffer we have in play.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Replace all `random()` calls with a function called `frr_weak_random()`
and make it clear that it is only supposed to be used for weak random
applications.
Use the annotation described by the Coverity Scan documentation to
ignore `random()` call warnings.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
And again for the name. Why on earth would we centralize this, just so
people can forget to update it?
Signed-off-by: David Lamparter <equinox@diac24.net>
Same as before, instead of shoving this into a big central list we can
just put the parent node in cmd_node.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is really no reason to not put this in the cmd_node.
And while we're add it, rename from pointless ".func" to ".config_write".
[v2: fix forgotten ldpd config_write]
Signed-off-by: David Lamparter <equinox@diac24.net>
The only nodes that have this as 0 don't have a "->func" anyway, so the
entire thing is really just pointless.
Signed-off-by: David Lamparter <equinox@diac24.net>
Fix
- Modulo check on data length not inclusive enough
- Garbage heap read when bounds checking
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
ospf_opaque_self_originated_lsa_received decrements refcount which can
result in a free, this is followed by a call to ospf_ls_ack_send which
accesses the freed LSA
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
... Oops ...
(for context, the defaults code originally didn't have a dedicated
"bool" variant and just used long for bools... I derp'd this when
adding bool as a separate case :( )
Reported-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@diac24.net>
Line break at the end of the message is implicit for zlog_* and flog_*,
don't put it in the string. Mid-message line breaks are currently
unsupported. (LF is "end of message" in syslog.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Some logging systems are, er, "allergic" to tabs in log messages.
(RFC5424: "The syslog application SHOULD avoid octet values below 32")
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
