Finding an LSP by its id is useful not only for the
`show isis database` command.
So move it out into its own function to make it reusable.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
To allow easier debugging of LSP transmission scheduling, add a debug
mode where all tx-queue insertions/deletions are logged.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
lsp_l1_refresh and lsp_l2_refresh are identical apart from the
hardcoded IS-IS level they are referring to. So merge them and
pass the level as part of the argument.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Implement RFC 6232, optionally allowing to flood isisd's NET and
hostname in purges it originates.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Add a command `debug openfabric flooding` to allow verification of
correct operation of the OpenFabric flooding optimization algorithm.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
While OpenFabric calculates most tier numbers automatically by the
fabric locality calculation algorithm, that algorithm requires two
systems to be manually configured as tier 0, so it has reference points.
Also, completely manual configuration is possible.
To support this, introduce appropriate CLI commands and flood the
configured information.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric uses an spf with the metric for all links set to one,
both for flooding optimization and for fabric locality detection.
So extend isisd's spf code to allow running it with such a metric
and have it run whenever normal spf runs.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric changes IS-IS's initial database synchronization. While
regular IS-IS will simultaneuously exchange LSPs with all neighboring
routers during startup, this is considered too much churn for a densely
connected fabric.
To mitigate this, OpenFabric prescribes that a router should only
bring up an adjacency with a single neighbor and perform a full
synchronization with that neighbor, before bringing up further
adjacencies.
This is implemented by having a field `initial_sync_state` in the
fabricd datastructure which tracks whether an initial sync is still
pending, currently in progress, or complete.
When an initial sync is pending, the state will transition to the
in-progress state when the first IIH is received.
During this state, all IIHs from other routers are ignored. Any
IIHs transmitted on any link other than the one to the router with
which we are performing the initial sync will always report the far
end as DOWN in their threeway handshake state, avoiding the formation of
additional adjacencies.
The state will be left if all the SRM and SSN flags on the
initial-sync circuit are cleared (meaning that initial sync has
completed). This is checked in `lsp_tick`. When this condition occurrs,
we progress to the initial-sync-complete state, allowing other
adjacencies to form.
The state can also be left if the initial synchronization is taking too
long to succeed, for whatever reason. In that case, we fall back to the
initial-sync-pending state and will reattempt initial synchronization
with a different neighbor.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
OpenFabric specifies that it should always be run with wide metrics via
P2P links and only as Level-2. Implement this as default and remove all
the knobs from fabricd which allow other configuration.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
fabricd is built using the sources of isisd. To allow differentiation
in the code, -DFABRICD=1 is added to its preprocessor flags.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Take the source-prefix sub-TLV into consideration when running SPF
and support creation/deletion of dst-src routes as result.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Have an array of spftrees instead of a separate spftree and an
spftree6 for which all the code gets duplicated.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
As isisd's route_tables are directly related to spf trees, move
the route tables into the spftree instead of maintaining them
alongside of the spftrees.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
Convert the list_delete(struct list *) function to use
struct list **. This is to allow the list pointer to be nulled.
I keep running into uses of this list_delete function where we
forget to set the returned pointer to NULL and attempt to use
it and then experience a crash, usually after the developer
has long since left the building.
Let's make the api explicit in it setting the list pointer
to null.
Cynical Prediction: This code will expose a attempt
to use the NULL'ed list pointer in some obscure bit
of code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
1. Change hostname_get to cmd_hostname_get
2. Change domainname_get to cmd_domainname_get
3. New API to set domainname
3. Provide a CLI command to set domainname
Signed-off-by: Mitesh Kanjariya <mitesh@cumulusnetworks.com>
Specifically, gcc 4.2.1 on OpenBSD 6.0 warns about these; they're bogus
(gcc 4.2, being rather old, isn't quite as "intelligent" as newer
versions; the newer ones apply more logic and less warnings.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The FSF's address changed, and we had a mixture of comment styles for
the GPL file header. (The style with * at the beginning won out with
580 to 141 in existing files.)
Note: I've intentionally left intact other "variations" of the copyright
header, e.g. whether it says "Zebra", "Quagga", "FRR", or nothing.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The way thread.c is written, a caller who wishes to be able to cancel a
thread or avoid scheduling it twice must keep a reference to the thread.
Typically this is done with a long lived pointer whose value is checked
for null in order to know if the thread is currently scheduled. The
check-and-schedule idiom is so common that several wrapper macros in
thread.h existed solely to provide it.
This patch removes those macros and adds a new parameter to all
thread_add_* functions which is a pointer to the struct thread * to
store the result of a scheduling call. If the value passed is non-null,
the thread will only be scheduled if the value is null. This helps with
consistency.
A Coccinelle spatch has been used to transform code of the form:
if (t == NULL)
t = thread_add_* (...)
to the form
thread_add_* (..., &t)
The THREAD_ON macros have also been transformed to the underlying
thread.c calls.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
These have copies in vtysh that do the node-switch locally and are
listed in extract.pl's ignore list. The ignore list however is
redundant since DEFUN_NOSH does the same thing...
ldpd is a bit hacky, but Renato is reworking this anyway.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
- SPF is now per level only (no more per family)
- t_spf and pending removed from struct spftree and moved to
spf_timer field in struct isis_area
- show isis summary output changed to accomodate the per level SPF
- isis_spf_schedule6 and isis_run_spf6_lx functions are removed,
isis_run_spf_lx now calls isis_run_spf for both INET and INET6
- lsp related functions now call isis_spf_schedule only
VTY_DECLVAR_CONTEXT already contains a NULL check, vty warning message
and return statement. These are not needed.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Additionally:
* Add [ip] to a couple bgp show commands
* Quick refactor of a couple ISIS commands
* Quick refactor of a couple OSPF6 commands
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
bgpd/bgpd.c had a typo
zebra/zebra_mpls_netlink.c was derived from rt_netlink.c
isisd/include-netbsd/* are not needed (2 constants moved over)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
If a command is put into the VIEW_NODE, it is going into the
ENABLE_NODE as well. This is especially true for show commands.
As such if a command is in both consolidate it down to VIEW_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This converts all uses of vty->index over to qobj. With this, isisd now
supports concurrent configuration editing as there are no more unsafe
references held anywhere while in config-edit mode.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Wire up all neccessary isisd first-class objects to be able to use qobj
safe-pointers on them.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
The regular expression for finding DEFUN/ALIAS in
extract.pl looks for "DEFUN (" or "ALIAS (" if
the *.c file does not have this then it will just
silently ignore the cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These patches is an implementation of RFC5305 that enable the
support of Traffic Engineering in IS-IS
* isisd/Makefile.am: Add new files isis_te.c and isis_te.h
* isisd/isis_circuit.[c,h]: Add new mpls_te_circuit structure to isis_circuit
structure to handle new Traffic Engineering TLVs
* isisd/isis_lsp.c: Update LSP handler to mux/demux Traffic Engineering TLVs
* isisd/isis_main.c: Add initialisation of ISIS TE
* isisd/isis_pdu.c: Update function process_p2p_hello() to retrieve remote IP
address to populate Traffic Engineering TLV.
* isisd/isis_te.[c,]: Implementation of RFC5305
* isisd/isis_tlv.[c,h]: Update TLV definition and function to handle
Traffic Engineering ones
* isisd/isis_zebra.c: Add new function isis_zebra_link_params() to retrieve
the link parameters of interfaces from ZBus to populate the Traffic Engineering
TLVs
* isisd/isisd.[c,h]: Add Traffic Engineering support with new debug command
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Last isisd CLI cleanup for now. This also folds L1 & L2 configs into
common functions, reducing CLI function bloat by a bit.
(This patch contains changes authored by both Christian Franke and David
Lamparter.)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Move out basic area configuration (metric type, overload and attachment
bits, dynamic hostname extension enable) into isis_vty.c.
[v2: moved stuff back here that accidentally was in the previous patch]
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Since we can't assume time_t to be long, int, or even long long, this
consistently uses %lld/long long (or %llu/unsigned long long in a few
cases) to print time_t/susecond_t values. This should fix a bunch of
warnings, on NetBSD in particular.
(Unfortunately, there seems to be no "PRId64" style printing macro for
time_t...)
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit ef008d2f8dc8f7160d8a3d24a15f2fad79ef3242)
Some places had extra semicolons where none belong. Remove them.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
(cherry picked from commit b7d5021bfa161f797cbfb1e92bf5b94327fb1b71)
For example during startup of isisd, the MTU of interfaces is not
known, since this information will only be available once the
interfaces have been learned from zebra.
It makes no sense to include the MTU 0 that is stored for interfaces
in this state in the consideration whether a new lsp-mtu for an
area is valid, so skip interfaces which are in this state.
Signed-off-by: Christian Franke <nobody@nowhere.ws>
isisd implements a holdoff interval and will refrain from regenerating
an lsp if the difference between the current time and its last refresh
is less than the holdoff interval. Instead, it will schedule a timer
to regenerate the lsp after the holdoff interval has passed.
This implementation has one disadvantage in the case where there is a
succession of calls to lsp_regenerate_schedule. In such a case, the
first call will trigger an immediate regeneration of the lsp, while the
other calls will only schedule the regeneration timer. This leads to
cases where it takes holdoff interval time for information to propagate,
just because the information was only available e.g. at the second call
of lsp_regenerate_schedule in such a succession of calls.
By not immediately regenerating an lsp if the last generation time
is sufficiently long ago, but instead scheduling the regeneration with a
very small delay, we allow all information from such a succession of
calls to be considered.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Acked-by: Donald Sharp <sharpd@cumulusnetworks.com>
Set/reset attached-bit in LSP header:
This patch provides support for set/reset attached_bit in the LSP header.
In IS-IS networks, routing inter-area traffic from L1 areas is
accomplished by sending the traffic to the nearest L1/L2 router.
A L1/L2 router identifies itself by setting an attach-bit (ATT-bit) in its (LSP).
The ATT-bit in LSP can be changed using the set-attached-bit or
no-set-attached-bit commands (similar to ‘set-overload-bit’ and
'no set-overload-bit’) using telnet terminal in router configuration mode.
Steps:
enable
configure terminal
router isis <Routing area>
set-attached-bit
V2: Removed looping through area list as this well set the bit for all
areas in the list. This implementation now looks exactly like the
current overload bit implementation.
Signed-off-by: Amritha Nambiar <amritha.nambiar@intel.com>
Summary of changes
- added an option to enable keepalive debugs for a specific peer
- added an option to enable inbound and/or outbound updates debugs for a specific peer
- added an option to enable update debugs for a specific prefix
- added an option to enable zebra debugs for a specific prefix
- combined "deb bgp", "deb bgp events" and "deb bgp fsm" into "deb bgp neighbor-events". "deb bgp neighbor-events" can be enabled for a specific peer.
- merged "deb bgp filters" into "deb bgp update"
- moved the per-peer logging to one central log file. We now have the ability to filter all verbose debugs on a per-peer and per-prefix basis so we no longer need to keep log files per-peer. This simplifies troubleshooting by keeping all BGP logs in one location. The use
r can then grep for the peer IP they are interested in if they wish to see the logs for a specific peer.
- Changed "show debugging" in isis to "show debugging isis" to be consistent with all other protocols. This was very confusing for the user because they would type "show debug" and expect to see a list of debugs enabled across all protocols.
- Removed "undebug" from the parser for BGP. Again this was to be consisten with all other protocols.
- Removed the "all" keyword from the BGP debug parser. The user can now do "no debug bgp" to disable all BGP debugs, before you had to type "no deb all bgp" which was confusing.
The new parse tree for BGP debugging is:
deb bgp as4
deb bgp as4 segment
deb bgp keepalives [A.B.C.D|WORD|X:X::X:X]
deb bgp neighbor-events [A.B.C.D|WORD|X:X::X:X]
deb bgp nht
deb bgp updates [in|out] [A.B.C.D|WORD|X:X::X:X]
deb bgp updates prefix [A.B.C.D/M|X:X::X:X/M]
deb bgp zebra
deb bgp zebra prefix [A.B.C.D/M|X:X::X:X/M]
When switching to metric-style transition, circuit metrics should also be
verified to be in the narrow range 0..63.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
When switching to narrow metric style, all configured circuits are
verified to have a valid narrow style metric. Check te_metric instead
of metric_default as the latter is only 8bit wide and may overflow for
wide style metrics.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
isisd defaults to wide metric style. So if narrow metric style is
configured, a matching setting should be written to the configuration,
allowing a narrow metric-style setting to be saved.
Signed-off-by: Christian Franke <chris@opensourcerouting.org>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
2008-01-29 James Carlson <james.d.carlson@sun.com>
* Fix bug #437, assert due to bogus index management
* isis_flags.c: (flags_initialize) new
* (flags_get_index) fix off by one, leading to list assert
on null node data.
(flags_free_index) ditto.
* isisd.c: (isis_area_create) use flags_initialize
(isis_area_destroy) deconfigure circuits when
taking down area.
