With the change of Solaris going from Supported -> UnSupported
the documentation needed to be updated to reflect the reality
on the ground.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Add support for a BGP-wide setting to enter and exit graceful shutdown.
This will apply to all BGP peers across all BGP instances. Per-instance
configuration is disallowed if the BGP-wide setting is in effect.
Signed-off-by: Vivek Venkatraman <vivek@nvidia.com>
Updated the user documentation to reflect changes made to routemaps "set
metric" VTY shell command.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
a linux configuration gives some explanation on how to set up an evpn
overlay in network namespaces.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
Add a blurb about the rpm package server in the overview page
so its easier to know where it is. Should be with the debian
one anyway.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
Enhancement to update-delay configuration to allow setting globally
rather than per-instance. Setting the update-delay is allowed either
per-vrf or globally, but not both at the same time.
Ticket: CM-31096
Signed-off-by: Don Slice <dslice@nvidia.com>
* Added an entry in the user documentation for the BGP daemon no-rib
option vty shell commands.
Signed-off-by: David Schweizer <dschweizer@opensourcerouting.org>
1. Added isis with different vrf and it's dependecies.
2. Added new vrf leaf in yang.
3. A minor change for IF_DOWN_FROM_Z passing argrument is
replaced with ifp pointer in api "isis_if_delete_hook()".
4. Minor fix in the isisd spf unit test.
Co-authored-by: Kaushik <kaushik@niralnetworks.com>"
Signed-off-by: harios_niral <hari@niralnetworks.com>
Example configuration:
route-map SET_SR_POLICY permit 10
set sr-te color 1
!
router bgp 1
bgp router-id 1.1.1.1
neighbor 2.2.2.2 remote-as 1
neighbor 2.2.2.2 update-source lo
address-family ipv4 unicast
neighbor 2.2.2.2 next-hop-self
neighbor 2.2.2.2 route-map SET_SR_POLICY in
exit-address-family
!
!
Learned BGP routes from 2.2.2.2 are mapped to the SR-TE Policy
which is uniquely determined by the BGP nexthop (2.2.2.2 in this
case) and the SR-TE color in the route-map.
Co-authored-by: Renato Westphal <renato@opensourcerouting.org>
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Co-authored-by: Sebastien Merle <sebastien@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Introduce the "show isis route" command to display the routes
associated to an SPF tree. Different from the "show ip route" command,
"show isis route" displays the L1 and L2 routes separately (and not
the best routes only).
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Some Sphinx apis have changed over time; test the installed
version and use the apis that match the version.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
The fuzzing code that is in the master branch is outdated and unused, so it
is worth to remove it to improve readablity of the code.
All the code related to the fuzzing is in the `fuzz` branch.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
Add new option to `segment-routing prefix` command to set the
Explcit Null flag in addition to the No-PHP flag. MPLS LFIB configuration
has been also updated to take into account the Explicit Null flag.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
RFC 8665 defines a Segment Routing Local Block for Adjacency SID.
This patch provides the possibility to modify the SRLB as well as
reserved the block range from the Label Manager.
- Introduce new CLI 'segment-routing local-block'
- Add local block to SRDB structure
- Parse / Serialize SRLB in Router Information LSA
- Update OSPF-SR topotest
- Update documentation
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
We can make the Linux kernel send an ARP/NDP request by adding
a neighbour with the 'NUD_INCOMPLETE' state and the 'NTF_USE' flag.
This commit adds new dataplane operation as well as new zapi message
to allow other daemons send ARP/NDP requests.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
Configuration example:
ip route 9.9.9.9/32 6.6.6.6 color 123
The SR Policy to be chosen is uniquely identified by the policy
endpoint (6.6.6.6) and the SR-TE color (123). Traffic will be
augmented with an MPLS label stack according to the active
candidate path of that particular policy.
Co-authored-by: GalaxyGorilla <sascha@netdef.org>
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Give the FRR users some examples of gRPC usage in scripts to let them
start experimenting with the new configuration interface provided by
YANG/northbound.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
It's time to say good bye to libyang 0.16.105. The recently
released libyang 1.0.184 includes numerous bug fixes and performance
improvements that we need.
Despite the major version bump from 0.x to 1.x, the libyang API is
the same except for a single backward-incompatible change in the
user types interface (which we're currently not using). Hence no
code changes were necessary to adapt FRR to libyang 1.x.
This commit also reintroduces some leafrefs that needed to be
removed from our YANG modules due to a bug that was present on
libyang 0.16.105.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Revert "zebra: support for macvlan interfaces"
This reverts commit bf69e212fd.
Revert "doc: add some documentation about bgp evpn netns support"
This reverts commit 89b97c33d7.
Revert "zebra: dynamically detect vxlan link interfaces in other netns"
This reverts commit de0ebb2540.
Revert "bgpd: sanity check when updating nexthop from bgp to zebra"
This reverts commit ee9633ed87.
Revert "lib, zebra: reuse and adapt ns_list walk functionality"
This reverts commit c4d466c830.
Revert "zebra: local mac entries populated in correct netnamespace"
This reverts commit 4042454891.
Revert "zebra: when parsing local entry against dad, retrieve config"
This reverts commit 3acc394bc5.
Revert "bgpd: evpn nexthop can be changed by default"
This reverts commit a2342a2412.
Revert "zebra: zvni_map_to_vlan() adaptation for all namespaces"
This reverts commit db81d18647.
Revert "zebra: add ns_id attribute to mac structure"
This reverts commit 388d5b438e.
Revert "zebra: bridge layer2 information records ns_id where bridge is"
This reverts commit b5b453a2d6.
Revert "zebra, lib: new API to get absolute netns val from relative netns val"
This reverts commit b6ebab34f6.
Revert "zebra, lib: store relative default ns id in each namespace"
This reverts commit 9d3555e06c.
Revert "zebra, lib: add an internal API to get relative default nsid in other ns"
This reverts commit 97c9e7533b.
Revert "zebra: map vxlan interface to bridge interface with correct ns id"
This reverts commit 7c990878f2.
Revert "zebra: fdb and neighbor table are read for all zns"
This reverts commit f8ed2c5420.
Revert "zebra: zvni_map_to_svi() adaptation for other network namespaces"
This reverts commit 2a9dccb647.
Revert "zebra: display interface slave type"
This reverts commit fc3141393a.
Revert "zebra: zvni_from_svi() adaptation for other network namespaces"
This reverts commit 6fe516bd4b.
Revert "zebra: importation of bgp evpn rt5 from vni with other netns"
This reverts commit 28254125d0.
Revert "lib, zebra: update interface name at netlink creation"
This reverts commit 1f7a68a2ff.
Signed-off-by: Pat Ruddy <pat@voltanet.io>
Document the commands `addpath-tx-all-paths`,
`addpath-tx-bestpath-per-AS` and attempt to provide an useful
explanation.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
This code was deprecated in 5.0 and removed after a year.
It has not been in the code base and we forgot to update the
doc.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The documentation for this command was missing. Add a little
bit of data for people in the future.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
* add a vrf sub-command `[no] ipv6 router-id X:X::X:X`.
* add command `[no] ipv6 router-id X:X::X:X [vrf NAME]` for backward
compatibility.
* add a vrf sub-command `[no] ip router-id A.B.C.D` and make the old
one without `ip` an alias for it.
* add a command `[no] ip router-id A.B.C.D [vrf NAME]` for backward
comptibility and make the old one without `ip` an alias for it.
* add command `show ip router-id [vrf NAME]` and make
the old one without `ip` an alias for it.
* add command `show ipv6 router-id [vrf NAME]`.
* add ZAPI commands `ZEBRA_ROUTER_ID_V6_ADD`,
`ZEBRA_ROUTER_ID_V6_DELETE` and `ZEBRA_ROUTER_ID_V6_UPDATE`
for deamons to get notified of the IPv6 router-id.
* update zebra documentation.
Signed-off-by: Sebastien Merle <sebastien@netdef.org>
Matching by dscp may now also be specified by its standard codepoint
(provided it has one), such as `cf0` or `af11`.
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
Extend PBR maps to discriminate by Differentiated Services Code Point and / or
Explicit Congestion Notification fields. These fields are used in the IP header
for classifying network traffic.
0 1 2 3 4 5 6 7
+-----+-----+-----+-----+-----+-----+-----+-----+
| DS FIELD, DSCP | ECN FIELD |
+-----+-----+-----+-----+-----+-----+-----+-----+
DSCP: differentiated services codepoint
ECN: Explicit Congestion Notification
Signed-off-by: Wesley Coakley <wcoakley@nvidia.com>
Signed-off-by: Saurav Kumar Paul <saurav@cumulusnetworks.com>
BFD profiles can now be used on the interface level like this:
interface eth1
ip router isis 1
isis bfd
isis bfd profile default
Here the 'default' profile needs to be specified as usual in the
bfdd configuration.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
