There are some situations where we create a ecommunity for
comparing to internal state when we are deleting, but in the
failure cases we would not free up the created memory.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
DF (Designated forwarder) election is used for picking a single
BUM-traffic forwarded per-ES. RFC7432 specifies a mechanism called
service carving for DF election. However that mechanism has many
disadvantages -
1. LBs poorly.
2. Doesn't allow for a controlled failover needed in upgrade
scenarios.
3. Not easy to hw accelerate.
To fix the poor performance of service carving alternate DF mechanisms
have been proposed via the following drafts -
draft-ietf-bess-evpn-df-election-framework
draft-ietf-bess-evpn-pref-df
This commit adds support for the pref-df election mechanism which
is used as the default. Other mechanisms including service-carving
may be added later.
In this mechanism one switch on an ES is elected as DF based on the
preference value; higher preference wins with IP address acting
as the tie-breaker (lower-IP wins if pref value is the same).
Sample output
=============
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn es 03:00:00:00:00:01:11:00:00:01
ESI: 03:00:00:00:00:01:11:00:00:01
Type: LR
RD: 27.0.0.15:6
Originator-IP: 27.0.0.15
Local ES DF preference: 100
VNI Count: 10
Remote VNI Count: 10
Inconsistent VNI VTEP Count: 0
Inconsistencies: -
VTEPs:
27.0.0.16 flags: EA df_alg: preference df_pref: 32767
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn route esi 03:00:00:00:00:01:11:00:00:01
*> [4]:[03:00:00:00:00:01:11:00:00:01]:[32]:[27.0.0.15]
27.0.0.15 32768 i
ET:8 ES-Import-Rt:00:00:00:00:01:11 DF: (alg: 2, pref: 100)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Add numberical evpn route type support to some more
show commands.
Also, simplify some of the code there to call common type parsing
function. Some of the bounds checking there is also unncessary given
how our cli node matching works.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
1. Sample ES display
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn es
ES Flags: L local, R remote, I inconsistent
VTEP Flags: E ESR/Type-4, A active nexthop
ESI Flags RD #VNIs VTEPs
03:00:00:00:00:01:11:00:00:01 LR 27.0.0.15:15 10 27.0.0.16(EA)
03:00:00:00:00:01:22:00:00:02 LR 27.0.0.15:16 10 27.0.0.16(EA)
03:00:00:00:00:01:22:00:00:03 LR 27.0.0.15:17 10 27.0.0.16(EA)
03:00:00:00:00:02:11:00:00:01 R - 10 27.0.0.17(A),27.0.0.18(A)
03:00:00:00:00:02:22:00:00:02 R - 10 27.0.0.17(A),27.0.0.18(A)
03:00:00:00:00:02:22:00:00:03 R - 10 27.0.0.17(A),27.0.0.18(A)
torm-11#
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
2. Sample ES-EVI display
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn es-evi
Flags: L local, R remote, I inconsistent
VTEP-Flags: E EAD-per-ES, V EAD-per-EVI
VNI ESI Flags VTEPs
1005 03:00:00:00:00:01:11:00:00:01 LR 27.0.0.16(EV)
1005 03:00:00:00:00:01:22:00:00:02 LR 27.0.0.16(EV)
1005 03:00:00:00:00:01:22:00:00:03 LR 27.0.0.16(EV)
1005 03:00:00:00:00:02:11:00:00:01 R 27.0.0.17(EV),27.0.0.18(EV)
1005 03:00:00:00:00:02:22:00:00:02 R 27.0.0.17(EV),27.0.0.18(EV)
1005 03:00:00:00:00:02:22:00:00:03 R 27.0.0.17(EV),27.0.0.18(EV)
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
3. Sample EAD route display
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
torm-11# sh bgp l2vpn evpn route type ead
BGP table version is 19, local router ID is 27.0.0.15
Status codes: s suppressed, d damped, h history, * valid, > best, i - internal
Origin codes: i - IGP, e - EGP, ? - incomplete
EVPN type-1 prefix: [4]:[ESI]:[EthTag]:[IPlen]:[VTEP-IP]
EVPN type-2 prefix: [2]:[EthTag]:[MAClen]:[MAC]:[IPlen]:[IP]
EVPN type-3 prefix: [3]:[EthTag]:[IPlen]:[OrigIP]
EVPN type-4 prefix: [4]:[ESI]:[IPlen]:[OrigIP]
EVPN type-5 prefix: [5]:[EthTag]:[IPlen]:[IP]
Network Next Hop Metric LocPrf Weight Path
Extended Community
Route Distinguisher: 27.0.0.15:5
*> [1]:[0]:[03:00:00:00:00:01:11:00:00:01]:[128]:[0.0.0.0]
27.0.0.15 32768 i
ET:8 RT:5550:1009
*> [1]:[0]:[03:00:00:00:00:01:22:00:00:02]:[128]:[0.0.0.0]
27.0.0.15 32768 i
ET:8 RT:5550:1009
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Re-org only; no other code changes. This is being done to make maintanence
of MH functionality (which will have more code added to it) easy.
The code moved here was originally committed via -
'commit 50f74cf131 ("*: support for evpn type-4 route")'
Signed-off-by: Anuradha Karuppiah <anuradhak@cumulusnetworks.com>
Coverity has noticed that we are using bgp_evpn after
we have already NULL checked it one time. Add an assert
to make Coverity happy here, if we get to this point
something terrible has happened.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Remove mid-string line breaks, cf. workflow doc:
.. [#tool_style_conflicts] For example, lines over 80 characters are allowed
for text strings to make it possible to search the code for them: please
see `Linux kernel style (breaking long lines and strings)
<https://www.kernel.org/doc/html/v4.10/process/coding-style.html#breaking-long-lines-and-strings>`_
and `Issue #1794 <https://github.com/FRRouting/frr/issues/1794>`_.
Scripted commit, idempotent to running:
```
python3 tools/stringmangle.py --unwrap `git ls-files | egrep '\.[ch]$'`
```
Signed-off-by: David Lamparter <equinox@diac24.net>
```
exit1-debian-9# show bgp summary
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt
192.168.0.2 4 200 10 6 0 0 0 00:00:35 8 8
2a02:4780::2 4 0 0 1 0 0 0 never Active 0
Total number of neighbors 2
exit1-debian-9# show bgp summary established
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Neighbor V AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down State/PfxRcd PfxSnt
192.168.0.2 4 200 10 6 0 0 0 00:00:39 8 8
Total number of neighbors 2
exit1-debian-9# show bgp summary failed
IPv4 Unicast Summary:
BGP router identifier 192.168.0.1, local AS number 100 vrf-id 0
BGP table version 8
RIB entries 15, using 2880 bytes of memory
Peers 2, using 43 KiB of memory
Neighbor EstdCnt DropCnt ResetTime Reason
2a02:4780::2 0 0 never Waiting for peer OPEN
Total number of neighbors 2
exit1-debian-9#
```
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
This is the bulk part extracted from "bgpd: Convert from `struct
bgp_node` to `struct bgp_dest`". It should not result in any functional
change.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Replace sprintf with snprintf where straightforward to do so.
- sprintf's into local scope buffers of known size are replaced with the
equivalent snprintf call
- snprintf's into local scope buffers of known size that use the buffer
size expression now use sizeof(buffer)
- sprintf(buf + strlen(buf), ...) replaced with snprintf() into temp
buffer followed by strlcat
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This fixes unnecessary whitespaces and makes capitalization
match for route type help strings.
Signed-off-by: Trey Aspelund <taspelund@cumulusnetworks.com>
Add new function `bgp_node_get_prefix()` and modify
the bgp code base to use it.
This is prep work for the struct bgp_dest rework.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
More second order effects of cleaning up rn usage
in bgp. Sprinkle the fairy const's all over the place.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Some were converted to bool, where true/false status is needed.
Converted to void only those, where the return status was only false or true.
Signed-off-by: Donatas Abraitis <donatas.abraitis@gmail.com>
Two of the evpn show commands with json option has memory leak.
1) show bgp l2vpn evpn route vni all json
2) show bgp l2vpn evpn route esi json
Before fix:
----------
Executed 'show bgp l2vpn evpn route vni all json' multiple times
used ordinary blocks continue to increase.
Note at the time of show command capture there were 22 evpn routes
in vni evpn route table.
Memory statistics for bgpd:
System allocator statistics:
Total heap allocated: 9152 KiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 7300 KiB
Free small blocks: 1760 bytes
Free ordinary blocks: 1852 KiB
Ordinary blocks: 880
Small blocks: 51
Holding blocks: 0
Ticket:CM-27920
Reviewed By:
Testing Done:
After fix:
---------
Executed 'show bgp l2vpn evpn route vni all json' multiple times
Used ordinary blocks remains low.
Memory statistics for bgpd:
System allocator statistics:
Total heap allocated: 8356 KiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 6492 KiB
Free small blocks: 1840 bytes
Free ordinary blocks: 1864 KiB
Ordinary blocks: 939
Small blocks: 52
Holding blocks: 0
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Found memory leak in json output of evpn's route
commands.
After executing 'show bgp l2vpn evpn route type prefix json'
and 'show bgp l2vpn evpn route type macip json' few times
(6 times) with more than 600 routes in total seeing
memory footprint for bgpd continue to grow.
Memory statistics for bgpd:
System allocator statistics:
Total heap allocated: 12 MiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 8390 KiB
Free small blocks: 1760 bytes
Free ordinary blocks: 3762 KiB
Ordinary blocks: 1161
Small blocks: 51
Holding blocks: 0
Ticket:CM-27920
Testing Done:
After fix:
excute few times,
'show bgp l2vpn evpn route type prefix json'
and 'show bgp l2vpn evpn route type macip json'
commands where used ordinary blocks (uordblks) is
in steady state.
Memory statistics for bgpd:
System allocator statistics:
Total heap allocated: 9968 KiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 6486 KiB
Free small blocks: 1984 bytes
Free ordinary blocks: 3482 KiB
Ordinary blocks: 1110
Small blocks: 54
Holding blocks: 0
Memory statistics for bgpd:
System allocator statistics:
Total heap allocated: 10100 KiB
Holding block headers: 0 bytes
Used small blocks: 0 bytes
Used ordinary blocks: 6488 KiB
Free small blocks: 1984 bytes
Free ordinary blocks: 3612 KiB
Ordinary blocks: 1113
Small blocks: 54
Holding blocks: 0
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
advertise pip running configuration should
display ip followed by mac parameters value as defined
in cli signature.
advertise-pip is enabled by default, when displaying the
running configuration, there is '\n' added after
ip and mac parameters which was not guarded around
the non-default parameters.
Currently, for every bgp vrf instance it ends up
displaying l2vpn address-family section due to
unguarded newline.
running config:
router bgp 6004 vrf vrf1
!
address-family l2vpn evpn
exit-address-family
!
Ticket:CM-26964
Testing Done:
With fix when only 'router bgp 6004 vrf vrf1' configured,
running config looks like:
!
router bgp 6004 vrf vrf1
!
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Instead of CMD_WARNING, use CMD_WARNING_CONFIG_FAILED
for any mis-configuration scenario.
Testing Done:
TOR(config)# router bgp 5548
TOR(config-router)# address-family l2vpn evpn
TOR(config-router-af)# no advertise-pip
This command is supported under L3VNI BGP EVPN VRF
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
By default announct Self Type-2 routes with
system IP as nexthop and system MAC as
nexthop.
An API to check type-2 is self route via
checking ipv4/ipv6 address from connected interfaces list.
An API to extract RMAC and nexthop for type-2
routes based on advertise-svi-ip knob is enabled.
When advertise-pip is enabled/disabled, trigger type-2
route update. For self type-2 routes to use
anycast or individual (rmac, nexthop) addresses.
Ticket:CM-26190
Reviewed By:
Testing Done:
Enable 'advertise-svi-ip' knob in bgp default instance.
the vrf instance svi ip is advertised with nexthop
as default instance router-id and RMAC as system MAC.
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Evpn Primary IP advertisement feature uses
individual system IP and system MAC for prefix (type-5)
and self type-2 routes.
The PIP knob is enabled by default for bgp vrf instance.
Configuration CLI for enable/disable PIP feature knob.
User can configure PIP system IP and MAC to retain as
permanent values.
For the PIP IP, the default behavior is to accept bgp default
instance's router-id. When the default instance router-id change,
reflect PIP IP assignment.
Reflect type-5 to use system-IP and system MAC as nexthop and RMAC
values.
Ticket:CM-26190
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
PR 5118 introduce additional (prepend) keywords
like 'ip' to Route Distinguisher output which
breaks existing evpn route show commands parsing.
Restore to original behavior.
Testing Done:
vtysh -c 'show bgp l2vpn evpn route'
Before fix:
Route Distinguisher: ip 27.0.0.15:44
Post fix:
Route Distinguisher: 27.0.0.15:44
Signed-off-by: Chirag Shah <chirag@cumulusnetworks.com>
Fixed memory leak and incorrect json output. Check the full output in the PR:
https://github.com/FRRouting/frr/pull/5118
Signed-off-by: Lakshman Krishnamoorthy <lkrishnamoor@vmware.com>
Fixed the following:
1. Print the complete header for 'show bgp l2vpn evpn' command
2. Print the Route Distinguisher header
3. Print all relevant routes in json (some were being skipped)
Signed-off-by: Kishore Aramalla <karamalla@vmware.com>
In a data center, having 32-128 peers is not uncommon. In such a situation, to find a
peer that has failed and why is several commands. This hinders both the automatability of
failure detection and the ease/speed with which the reason can be found. To simplify this
process of catching a failure and its cause quicker, this patch does the following:
1. Created a new function, bgp_show_failed_summary to display the
failed summary output for JSON and vty
2. Created a new function to display the reset code/subcode. This is now used in the
failed summary code and in the show neighbors code
3. Added a new variable failedPeers in all the JSON outputs, including the vanilla
"show bgp summary" family. This lists the failed session count.
4. Display peer, dropped count, estd count, uptime and the reason for failure as the
output of "show bgp summary failed" family of commands
5. Added three resset codes for the case where we're waiting for NHT, waiting for peer
IPv6 addr, waiting for VRF to init.
This also counts the case where only one peer has advertised an AFI/SAFI.
The new command has the optional keyword "failed" added to the classical summary command.
The changes affect only one existing output, that of "show [ip] bgp neighbors <nbr>". As
we track the lack of NHT resolution for a peer or the lack of knowing a peer IPv6 addr,
the output of that command will show a "waiting for NHT" etc. as the last reset reason.
This patch includes update to the documentation too.
Signed-off-by: Dinesh G Dutt <5016467+ddutt@users.noreply.github.com>
The `show bgp l2vpn evpn route type <es|prefix>` commands
only accepted 2 letters. You could not type `show bgp l2vpn evpn route type e`
or `show bgp l2vpn evpn route type p` although both are technically legal
since nothing overlaps with them.
Ticket: CM-25988
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
