The tracking of who have drpriority on an interface
in pim was not displayed anywhere. Add to the show
command for future reference.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
In pim_if_new use bool instead of an int to pass
true/false values for what we should create the
pim interface type for.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The startup of a non-integrated config was not properly
allowing for startup to create the vif when we have
not learned about the interface we are trying to configure
at this point in time. Actually notice when we are
trying to create a pimreg device or not to properly
notice when to attempt to create the vif or not.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
A new command "ip pim" is created to configure pim sm on an
interface, which replaces the existing commands "ip pim sm"
and "ip pim ssm" and make "ip pim sm" and "ip pim ssm" as
hidden commands. The command "ip multicast-routing" is removed
since it is already enabled on FRR by default.
Signed-off-by: Sarita Patra saritap@vmware.com
Problem reported that some bgp and ospf json commands did not return
any json output at all if the bgp/ospf instance did not exist.
Additionally, some bgp and ospf json commands did not return any json
output if the instance existed but no neighbors were defined. This
fix makes these commands more consistent in returning empty braces for
json output and issue a message if not using json output. Additionally,
made the flag "use_json" a bool to make it consistent since previously,
it had been defined as an int, char, u_char, and bool at various places.
Ticket: CM-21040
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
e.g.
pimd/pim_oil.c: In function ‘pim_channel_oil_dump’:
pimd/pim_oil.c:51:19: error: ‘%d’ directive writing between 1 and 11 bytes into a region of size 10 [-Werror=format-overflow=]
Build on gcc-8.2.0 is warning-free after this patch.
Signed-off-by: David Lamparter <equinox@diac24.net>
There is no need to check for failure of a ALLOC call
as that any failure to do so will result in a assert
happening. So we can safely remove all of this code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Don't show BFD commands with timers since it might confuse users
("show running-config" won't display timers in client daemons anymore),
but keep accepting this command from previous configurations.
Signed-off-by: Rafael Zalamena <rzalamena@opensourcerouting.org>
Both pim_ecmp_nexthop_lookup and pim_ecmp_fib_lookup_if_vif_index
pass the address in 2 times. Make function calls consistent
and just pass in the src once.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When doing nexthop lookups do not permanently allocate
memory in zebra and pim to track the nexthop specified
on the cli.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
These commands were being accepted in all vrf's and
affecting all vrf's behavior globally, since they were
global variables.
Modify the code to make these two commands work
on a per-vrf basis.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The following types are nonstandard:
- u_char
- u_short
- u_int
- u_long
- u_int8_t
- u_int16_t
- u_int32_t
Replace them with the C99 standard types:
- uint8_t
- unsigned short
- unsigned int
- unsigned long
- uint8_t
- uint16_t
- uint32_t
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
We know the vrf that we are in when we need to initiate a
rescan of the rpf cache. So pass it in and use that information.
This should help the rescan at scale with several vrf's cutting
out a lot of unnecessary work.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Feature of mtrace only IGMP sockets on pim sm and pim
ssm interfaces. Modifed IGMP socket creation and show
igmp interface command output.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
This commit is the implementation of weak multicast traceroute.
It consists of IGMP module dealing with mtrace type IGMP messages
and client program mtrace/mtracebis for initiating mtrace queries.
Signed-off-by: Mladen Sablic <mladen.sablic@gmail.com>
The PIM_NODE command is only being used to display
default vrf configuration. Move this into the
vrf display and remove PIM_NODE.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The 'ip pim use-source ...' command returns a hard
success/failure. Allow it to return a soft-failure
for when we re-enter the same line.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When PIM handles some MSDP commands, a repeated command
was causing a CMD_WARNING_CONFIG_FAILED. This should
be a CMD_WARNING. Fix the code to allow vtysh to handle
this appropriately.
Ticket: CM-19053
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When we ask PIM to do a CLI search of a random (S,G) if the
(S,G) has no RPF due to no route, let the user know about
the issue instead of crashing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This improves code readability and also future-proofs our codebase
against new changes in the data structure used to store interfaces.
The FOR_ALL_INTERFACES_ADDRESSES macro was also moved to lib/ but
for now only babeld is using it.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
This is an important optimization for users running FRR on systems with
a large number of interfaces (e.g. thousands of tunnels). Red-black
trees scale much better than sorted linked-lists and also store the
elements in an ordered way (contrary to hash tables).
This is a big patch but the interesting bits are all in lib/if.[ch].
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
When displaying the 'show ip pim upstream' command.
Display proper information about the RPF address
choosen.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When displaying the mroute table, add ability to fill
in all the missing data that for human eyes can be assumed.
This will allow people using grep over the command
can get more information.
sharpd@robot ~> sudo vtysh -c "show ip mroute fill"
Source Group Proto Input Output TTL Uptime
* 229.1.1.1 STATIC dum0 enp3s0 1 00:11:07 Default-IP-Routing-Table
* 229.1.1.1 STATIC dum0 virbr0 1 00:01:47 Default-IP-Routing-Table
sharpd@robot ~>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Adds the ability to filter PIM Joins & IGMP reports on an interface.
Enabling a multicast boundary on an interface for a particular group
will prevent the interface from appearing in the group's OIL.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
If pim/igmp is not enabled on an interface, the ->info pointer will be
null. Need to check that before dereferencing it.
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
This fixes the broken indentation of several foreach loops throughout
the code.
From clang's documentation[1]:
ForEachMacros: A vector of macros that should be interpreted as foreach
loops instead of as function calls.
[1] http://clang.llvm.org/docs/ClangFormatStyleOptions.html
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
Start the conversion of pim configuration commands to use
the ferr side channel to allow more detailed information
to be returned to cli commands.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
All the rp debugs were a mish-mash of TRACE or ZEBRA,
but the reality they were all focused on handling NHT
issues associated with the RP's. So let's create
a new debug 'debug pim nht rp' if you are having
issues with RP's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This feature does this:
Add the ability to store the non-prefix static RP
entries into a table. Then to lookup the G to
find the RP in that table, finding the longest
prefix match across both prefix-lists and
static RP's.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
