Sometimes it's needed to match by fields of one object but set fields of
another object. The following commit is an example.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Description:
Change is intended for fixing the following issues related to vrf route leaking:
Routes with special nexthops i.e. blackhole/sink routes when imported,
are not programmed into the FIB and corresponding nexthop is set as 'inactive',
nexthop interface as 'unknown'.
While importing/leaking routes between VRFs, in case of special nexthop(ipv4/ipv6)
once bgp announces route(s) to zebra, nexthop type is incorrectly set as
NEXTHOP_TYPE_IPV6_IFINDEX/NEXTHOP_TYPE_IFINDEX
i.e. directly connected even though we are not able to resolve through an interface.
This leads to nexthop_active_check marking nexthop !NEXTHOP_FLAG_ACTIVE.
Unable to find the active nexthop(s), route is not programmed into the FIB.
Whenever BGP leaks routes, set the correct nexthop type, so that route gets resolved
and correctly programmed into the FIB, in the imported vrf.
Co-authored-by: Kantesh Mundaragi <kmundaragi@vmware.com>
Signed-off-by: Iqra Siddiqui <imujeebsiddi@vmware.com>
Without this, the hook code creates functions with empty parameter lists
like "void hook_something()", which is not a proper C prototype. It
needs to be "void hook_something(void)". Add some macro shenanigans to
handle that.
... and make the plumbing functions "inline" too.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
This fixes some spurious warnings on *BSD, where `elffile_add_dynreloc`
isn't used since `elf_getdata_rawchunk` is not available.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Commit: 4b983eef2c
Modified the zapi send receive of the c-bit to only
be under the HAVE_BFDD. If you are using ptm-bfd
then the decoder function still expects this to be
sent down. This commit puts this behavior back
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This allows defining a CLI command like this:
`[no] some setting ![VALUE]`
with VALUE being optional for the "no" form, but required for the
positive form. It's just a `[...]` where the empty branch can only be
taken for commands starting with `no`.
Signed-off-by: David Lamparter <equinox@opensourcerouting.org>
Instead of adding a separate case clause for every node, just find the
node structure in the global list and get its parent node from there.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Insist on the fact that zclient neighbor state flags are
mapped over netlink state flags. List all the defines
currently known on kernel, and create a netlink API to
convert netlink values to zclient values. The function is
simplified as it is a 1-1 match.
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
As NHRP expects some notification of neighboring entries on GRE
interface, when a new interface notification is encountered, the
exact neighbor state flag is found. Previously, the flag passed
to the upper layer was forced to NDM_STATE which is REACHABLE,
as can be seen on below trace:
2021/08/25 10:58:39 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x2 cache used 1 type 5
When passing the real value, NHRP received an other value like STALE.
2021/08/25 11:28:44 NHRP: [QQ0NK-1H449] Netlink: new-neigh 102.1.1.1 dev gre1 lladdr 10.125.0.2 nud 0x4 cache used 0 type 5
This flag is important for NHRP, as it permits to monitor the link
layer of NHRP entries.
Fixes: d603c0774e ("nhrp, zebra, lib: enforce usage of zapi_neigh_ip structure")
Signed-off-by: Philippe Guibert <philippe.guibert@6wind.com>
"[no] netns NAME" commands are part of the lib, but they are actually
zebra-only:
- they are using vrf_netns_handler_create and its description clearly
says that it "should be called from zebra only"
- vtysh sends these commands only to zebra
- only zebra outputs the netns related config
- zebra notifies other daemons about netns attachment
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
There is a possibility that the same line can be matched as a command in
some node and its parent node. In this case, when reading the config,
this line is always executed as a command of the child node.
For example, with the following config:
```
router ospf
network 193.168.0.0/16 area 0
!
mpls ldp
discovery hello interval 111
!
```
Line `mpls ldp` is processed as command `mpls ldp-sync` inside the
`router ospf` node. This leads to a complete loss of `mpls ldp` node
configuration.
To eliminate this issue and all possible similar issues, let's print an
explicit "exit" at the end of every node config.
This commit also changes indentation for a couple of existing exit
commands so that all existing commands are on the same level as their
corresponding node-entering commands.
Fixes#9206.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
While defaults are good picks for "reasonable" guesses, min and max
range values really aren't. Operators and experimenters often like to
configure "unreasonable" values to stress test, tests boundary
conditions and explore innovations.
With that in mind, change all ranges to 1..max (of type).
While we're here add optional ignored values in the "no" CLI forms.
Signed-off-by: Christian Hopps <chopps@labn.net>
When using "match evpn default-route" rule, match_arg is NULL and strcmp
is not happy with that. There's already a special function named rulecmp
that handles such situations.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Currently, when we check the new prefix-list entry for duplication, we
only take filled in fields into account and ignore optional fields.
For example, if we already have `ip prefix-list A 0.0.0.0/0 le 32` and
we try to add `ip prefix-list A 0.0.0.0/0`, it is treated as duplicate.
We should always compare all prefix-list fields when doing the check.
Fixes#9355.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
Previous:
- frrscript_load: push Lua function onto stack
- frrscript_call: calls Lua function
Now:
- frrscript_load: checks Lua function
- frrscript_call: pushes and calls Lua function (first clear the stack)
So now we just need one frrscript_load for consecutive frrscript_call.
frrscript_call does not recompile or reload the script file, it just
keys it from the global Lua table (where it should already be).
Signed-off-by: Donald Lee <dlqs@gmx.com>
