Ensure that the route-entry QUEUED flag is cleared in the async
notification path, as it is in the normal results processing
code path.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When we are sending a redistribute_update, pass the old_re in
so that if we still have it around we can update the calling protocol.
Test:
router ospf
redistribute sharp
!
sharp install route 4.5.6.7 nexthop 192.168.201.1 1
Now add a `ip route 4.5.6.7/32 192.168.201.1`.
This causes zebra to replace the sharp route with the static route.
No update is sent to ospf and debug:
2019/08/01 19:02:38.271998 ZEBRA: 0:4.5.6.7/32: Redist update re 0x12fdbda0 (static), old 0x0 (None)
With fix:
2019/08/01 19:15:09.644499 ZEBRA: 0:4.5.6.7/32: Redist update re 0x1ba5bce0 (static), old 0x1beea4e0 (sharp)
2019/08/01 19:15:09.645462 OSPF: ospf_zebra_read_route: from client sharp: vrf_id 0, p 4.5.6.7/32
Ticket: CM-25847
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The flag ROUTE_ENTRY_NEXTHOPS_CHANGED is only ever set or unset.
Since this flag is not used for anything useful, remove from system.
By changing this flag we have re-ordered `internalStatus' of json
output of zebra rib routes. Go through and fix up tetsts to
use the new values.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The code as written before this code change point would enqueue
every system route type to be refigured when we have an
interface event. I believe this was to originally handle bugs
in the way nexthop tracking was handled, mainly that if you keep
asking the question you'll eventually get the right answer.
Modify the code to not do this, we have fixed nexthop tracking
to not be so brain dead and to know when it needs to refigure
a route that it is tracking.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem reported where certain routes were not being passed on to
clients if they were operated on while still queued for kernel
installation. Changed it to defer working on entries that were
queued to dplane so we could operate on them after getting an
answer back from kernel installatino.
Ticket: CM-25480
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add a file that exposes functions which modify nexthop groups.
Nexthop groups are techincally immutable but there are a
few special cases where we need direct access to add/remove
nexthops after the group has been made. This file provides a
way to expose those functions in a way that makes it clear
this is a private/hidden api.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The import table code assumes that they will only work
in the default vrf. This is ok, but we should push the
vrf_id and zvrf to be passed in instead of just using
VRF_DEFAULT.
This will allow us to fix a couple of things:
1) A bug in import where we are not creating the
route entry with the appropriate table so the imported
entry is showing up in the wrong spot.
2) In the future allow `ip import-table X` to become
vrf aware very easily.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Improve debugging when we cannot find a route to delete
that we have been told to delete.
New output:
2019/06/25 17:43:49 ZEBRA: default[0]:4.5.6.7/32 doesn't exist in rib
2019/06/25 17:43:49 ZEBRA: default[0]:4.5.6.8/32 doesn't exist in rib
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
When dumping rib data about a route for `debug rib detail`
modify the dump command to display the prefix as part
of every line so that we can use a grep on the log
file.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Problem discovered in testing that occasionally when an interface
address was flushed, the corresponding route would be removed from
the kernel and zebra but remain in the bgp table and be advertised
to peers. Discovered that when zebra_rib_evaluate_nexthops spun
thru the tree list of rns, if the timing and circumstances were
right, it would move elements and miss evaluating some. Changed
from frr_each to frr_each_safe and the problem is now gone.
Ticket: CM-25301
Signed-off-by: Don Slice <dslice@cumulusnetworks.com>
Add a expected count for the route node we will be processing
as part of nexthop resolution and modify the type to display
a useful string of what the type is instead of a number.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The multicast mode enum was a global static in zebra_rib.c
it does not belong there, it belongs in zebra_router, moving.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
BGP always sends down the correct distance to use. We do
not need rib_add_multipath to double check the code.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Since these functions are not really rib processing problems
let's move them to zebra_nhg.c which is meant for processing of
nexthop groups.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow route notifications to trigger route state changes,
such as installed -> not installed.
Clean up the fib-specific nexthop-group in a couple of
un-install paths.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Use some common handling for both route update results
processing and dataplane notification processing. Use the
fib-specific nexthop-group if the update to a route results
in different nexthop status than the default rib-provided
nexthop-group.
Use the fib-specific nexthop-group, if present, to provide
the output of 'show ip fib'.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
When setting route nexthops' installation state based on a
dataplane context struct, unset the installed state if a
nexthop was not present in the dataplane context.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Create a helper api that locates a zebra route-node from info
in a dplane context struct. Moved code from the results handler
to make a more-general api that could be used in other paths.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
Add an api to update the status of a route based on info
from a dplane context object. Use the api when processing
route update results from the dataplane.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
<Initial Code from Praveen Chaudhary>
Add the a `--graceful_restart X` flag to zebra start that
now creates a timer that pops in X seconds and will go
through and remove all routes that are older than startup.
If graceful_restart is not specified then we will just pop
a timer that cleans everything up immediately.
Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com>
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
Allow label ignoring when comparing nexthops. Specifically,
add another functon nexthop_same_no_labels() that shares
a path with nexthop_same() but doesn't check labels.
rib_delete() needs to ignore labels in this case.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
The functions nexthop_same() does not check the resolved
nexthops so I don't think this function is even needed
anymore.
Signed-off-by: Stephen Worley <sworley@cumulusnetworks.com>
This is necessary to avoid a name collision with std::for_each
from C++.
Fixes the compilation of the gRPC northbound module.
Signed-off-by: Renato Westphal <renato@opensourcerouting.org>
VRRP doesn't install any routes, but should still have an array entry.
Also add a help string for VRRP to route_types.txt
Signed-off-by: Quentin Young <qlyoung@cumulusnetworks.com>
The re->uptime usage of time(NULL) leaves it open to
timing changes from outside influence. Switching
to monotime allows us to ensure that we have a timestamp
that is always increasing.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
For each table created by a vrf, keep track of it and
allow for proper cleanup on shutdown of that particular
table. Cleanup client shutdown to only cleanup data
that the particular vrf owns. Before we were cleaning
the same table 2 times.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
This command is broken and has been broken since the introduction
of vrf's. Since no-one has complained it is safe to assume that
there is no call for this specialized linux command. Remove
from the system with extreme prejudice.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
The route_info[X].meta_q_map *must* be less than MQ_SIZE
or we will do some strange stuff, so assert on it at startup.
The distance in route_info is a uint8_t so let's keep the data
structure the same.
Signed-off-by: Donald Sharp <sharpd@cumulusnetworks.com>
