Use to-string functions for GR message codes instead of raw
string array indexing; the values used can come in packets
and are not validated.
Signed-off-by: Mark Stapp <mjs@voltanet.io>
If we enter:
int eth0
ip ospf area 0
ip ospf 10 area 0
!
This will crash ospf. Prevent this from happening.
OSPF instances:
a) Cannot be mixed with non-instance
b) Are their own process.
Since in multi-instance world ospf instances are their own process,
when an ospf processes receives an instance command we must remove
our config( if present ) and allow the new config to be active
in the new process. The problem here is that if you have not
done a `router ospf` above the lookup of the ospf pointer will
fail and we will just crash. Put some code in to prevent a crash
in this case.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
This commit fixes the following behavior:
```
nfware(config)# interface enp2s0
nfware(config-if)# ip ospf area 0
nfware(config-if)# no ip ospf area 0
% [ospfd]: command ignored as it targets an instance that is not running
```
We should be able to use the command without configuring the instance.
Signed-off-by: Igor Ryzhov <iryzhov@nfware.com>
We have this pattern in the code base:
if (thread)
THREAD_OFF(thread);
If we look at THREAD_OFF we check to see if thread
is non-null too. So we have a double check.
This is unnecessary. Convert to just using THREAD_OFF
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Instead of closing the socket, just note the failure and
continue on. If we actually failed here so many other
things would not be working at all, that actually
closing the fd won't matter.
Signed-off-by: Donald Sharp <sharpd@nvidia.com>
Description:
Added the following debug commands to enable debugs
GR helper functionality.
[no] debug ospf gr helper
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
The following show commands are added to display helper specific
information.
1.show ip ospf graceful-restart helper [detail] [json]
--> displays user configurations and list of all helpers details.
2.show ip ospf neighbour detail
--> diplays helper details
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
The follwoing helper exit scenarios are handled.
1. Recv Max age grace LSA from RESTARTER.
2. Grace timer expiry.
3. Due to topo change if lsa check is enabled.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
Description:
1. Skipping inactivity timer during graceful restart to make
the RESTARTER active even after dead timer expiry.
2. Handling HELPER on unplanned outages.
Signed-off-by: Rajesh Girada <rgirada@vmware.com>
1. Ospf dead-interval will be set as 4 times of hello-interval, incase
if it is not set by using "ip ospf dead-interval <dead-val>".
2. On resetting hello-interval using "no ip ospf hello-interval" the
dead interval and hello due will be changed accordingly.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
In a topology like R1 -- R2 -- R5, with R2 being NSSA ABR and R5 being
ASBR redistributing external routes, the ABR R2 will translate type-7
LSA into type-5 and advertise to the backbone. In the current implementation
R2 is also advertising a type-4 LSA when there is no need.
RFC 3101: "...NSSA's border routers never originate Type-4 summary-LSAs
for the NSSA's AS boundary routers, since Type-7 AS-external-LSAs are
never flooded beyond the NSSA's border..."
With this PR a type-4 LSA will not be advertised
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
When the ASBR stops announcing a prefix into the NSSA area, the LSA
type 7 is removed from the area. However the ABR is refreshing the
type 5 in its LSDB while removing the Type 7 LSA. Routers outside
the area do not get an update.
With this change the LSA type 5 is flushed from the LSDB and the
change is announced to routers outside the area
Signed-off-by: ckishimo <carles.kishimoto@gmail.com>
1. Fix for duplicating calls of ospf_external_lsa_refresh()
in ospf_distribute_list_update_timer().
2. Added the comment and change from PR 6981.
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
If NSSA is enabled before redistribution is configured, Type-7 LSA's
are installed. But if NSSA is enabled after redistribution is
configured, Type-7 LSAs are missing.
With this change, when NSSA is enabled, scan for external LSA's and
if they exist, install Type-7.
Signed-off-by: Alexander Chernavin <achernavin@netgate.com>
1. Minor change in distribute-list update timer based on lsa flag.
Co-authored-by: harios <hari@niralnetworks.com>
Signed-off-by: Kaushik <kaushik@niralnetworks.com>
In the context of TI-LFA it is necessary to have multiple
representations of SPFs for so called P and Q spaces. Hence it makes
sense to start with fresh vertex lists, and only delete them when
the SPF calculation is not a 'dry run'.
Signed-off-by: GalaxyGorilla <sascha@netdef.org>
Following PR #6726, Coverity Scan detected some new errors in the OSPF Segment
Routing code. This patch corrects them.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
OSPFD sends ARP proactively to speed up convergence for /32 networks
on a p2p connection. It is only an optimization, so it can be disabled.
It is enabled by default.
Signed-off-by: Jakub Urbańczyk <xthaid@gmail.com>
PR #6416 that solves opsf crash when segment routing is restarted, introduce a
regression in Extended Prefix flooding: when segment routing prefix is modified
or removed, new segment routing prefix is no more flooded. This patch correct
this regression.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
Add new option to `segment-routing prefix` command to set the
Explcit Null flag in addition to the No-PHP flag. MPLS LFIB configuration
has been also updated to take into account the Explicit Null flag.
Signed-off-by: Olivier Dugeon <olivier.dugeon@orange.com>
